1/4\" Steel High Clearance FabricatedControl Arms for 0\" to 1.5\" Lift Height
1994-1999 Dodge Ram 1500/2500/3500 4WD
This is an example of aMoparOEM replacement control arm. Stryker design engineers saw room for improvement and designed both our Drawn Over Mandrel (DOM) and our NEWFabricatedHigh Clearancearms as a true Dodge 1500 2500 3500 Heavy Duty upgraded Control Arm.
Stryker\'s DOM Control Arms
Our heavy wall (Drawn Over Mandrel)DOMsleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment).These arms are precisely the proper length to center your front axle within the wheel well- Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence!These arms are precisely the proper length to center your front axle within the wheel well!
Stryker\'s HIGH CLEARANCE DOM Control Arms
Our heavy wall (Drawn Over Mandrel)HIGH CLEARANCEDOMsleeves share all of the same features and benefits as our straight arms but with the added benefit ofHigh Clearance Control Armsforless Tire Rub and IMPROVED TURNING RADIUS. TheyareALSO application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment).These arms are precisely the proper length to center your front axle within the wheel well- Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence!These arms are precisely the proper length to center your front axle within the wheel well!
Fabricated High Clearance Control Armsfor less Tire Rub and IMPROVED TURNING RADIUS!
These are brand new1/4\" steel construction,CAD designed, andplasmacutfabricated control arms for the front of aDodge Ram 1500 2500 3500 4x4 with 0\" to 1.5\" lift height.ThisI-BEAM Fabricationis the epitome of Stryker\'s commitment toRUGGED STYLE!These WILL fit the 1500 Megacab 4x4 as well. This is for a set of 4, includes 2 uppers and 2 lowers.
If acouple more degrees of turning radiusandless Tire Rubcaptures your attention, you should really consider aHIGH CLEARANCE control armfor your Heavy Duty 1500, 2500 or 3500. AndStrykerconsiders our Brand NewFabricated High Clearance Armsa significant offering consistent with our goal of providing you withRugged Style!
If you\'ve installed a leveling kit, youDEFINITELY need longer control arms!This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well.They definitely allow the best tire fitment as it re-centers the axle in the wheel well. These are sold in a set of 4, because you reallyneed uppers AND lowersto re-center your axle properly.
Our arms are powder coated black and come with our decals for the lower arms. Again, these are brand new. They come ready to install, with pre-installedzirconfittings, Daystar PTMEG poly bushings, DOM sleeves, etc. Simply re-use your factory hardware.What sets ours apartfrom other competitors? We useDOM tubing in the collarsof the arms AS WELL as the sleeve. Take a look at the sleeve pics. On the left is our Stryker sleeve. On the right is a competitors. We use heavy wall DOM tubing, with NO split seam, for our sleeves. The issue with the competitors sleeves is they are thinner wall and simply rolled over. This leaves a gap/seam. These arms take a lot of back and forth pressure. Over time, the other sleeves start to pull apart at that seam, creating a sharp edge inside the bushing, causing the bushing to shred from the inside. Our sleeves are DOM, with no seam, and a much heavier wall thickness. These are guaranteed!
Benefits:
- Properly centers front axle within wheel well
- Stronger than factory stamped steel arms
- CAD designed and laser cut
- Beefy 1/4\" steel construction w/ DOM collars
- Daystar brand PTMEG poly bushings
- Year-model-specific DOM sleeves
- Greasable zerk fittings pre-installed
- Made in the USA!
Description:
Our strong 1/4\" steel construction fabricated control arms are the perfect upgrade to the factory stamped steel control arms. Including heavy wall DOM sleeves, custom-designed Daystar brand PTMEG poly bushings, and pre-installed zerk fittings, these arms come completely ready to install - Just remove your factory arms and bolt these right in!Our heavy wall DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within!These arms are precisely the proper length to center your front axle within the wheel well at 0\" to 1.5\" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence!If you\'ve installed a 0\" to 1.5\" leveling kit and your front tires are close to rubbing the fenders near your doors, you need longer arms to properly re-center your axle!Kit Contents:
(2) Upper Fabricated Control Arms
(2) Lower Fabricated Control ArmsFitment:
94-99 Dodge Ram 1500/2500/3500 4WDTechnical Notes:
Re-uses factory hardware
![1994-1999 Dodge Ram 1500 2500 3500 4WD 0\](parts-image-large/g/aF0AAOSwKQhg7c2L/s-l1600/1994-1999-Dodge-Ram-1500-2500-3500-4WD-0-1-5-High-.jpg "1994-1999 Dodge Ram 1500 2500 3500 4WD 0\")
