Real-time Monitoring: The LCD display can clearly display the temperature and pressure of the tire in real time. The temperature and pressure data can be switched (default is 0- 3.5 Bar / 0-50 Psi), the temperature unit ℉ / °C / Bar and the pressure unit: PSI / Bar are optional.
Solar Power & USB Charging: Support solar power charging and USB cable charging, do not occupy the car cigarette lighter socket,ensure that the TPMS can work continuously, You don\'t need to worry about low battery.
Intelligent Voice Alarm: When the tire temperature or pressure is abnormal, TPMS will give voice Alarm to broadcast tire problem immediately, you don’t need to stare at the monitor screen to confirm tire problems, Press any button will stop alarming, it is more convenient and safe.
Intelligent on and off: It has vibration sensing, After the tire pressure monitoring system is opened, If the tire pressure monitor sensor does not detect vibration, the display will automatically enter sleep mode to save power, it will automatically turn on when the car vibrating. After manually shutting down, you need to manually start it.
4 External Waterproof Sensors: 4 IP68 sensors can be waterproof, dustproof and snowproof, anti-corrosion,good accuracy for measure temperature and pressure, monitor the temperature and pressure of the tires for you, ensure the safety of the driver, and extend the service life of the tires.
Specification：
Display screen:LCD
Operating temperature: -30°C-85°C
Working voltage: 3.7-5V
Daytime operating current/Night operating current/Standby current:＜20mA/＜4mA/＜50uA
Transmission frequency:433.92MHZ+/-20KHZ
Transmission mode:FSK
Pressure unit: BAR/PSI
Charging ways:Solar energy/USB(USB cable is not included)
Battery:1*303450 3.7V 500mAh
Sensor:
Operating temperature: -30°C-85°C
Working voltage: 3.7-5V
Standby current:＜1uA
Transmission frequency: 433.92MHZ+/-20KHZ
Transmitted power:＞8dBm
Open Distance:＞30M
Battery(each sensor):1*CR1632 3V
Monitor size: Approx.9.5*8.5cm
Sensor size(each): Approx.2*2*2cm
Package Included:
1 TPMS Receiver host
4 Sensors
4 Anti-lost nuts
1 Hex spanner
1 Anti-slip Pad
1 User manual
FL-Front Left, FR-Front Right, RR-Rear Right, RL-Rear Left
--Unscrew the valve dustproof cap then screw on the hexagonal nut
--Screw on the sensor
--Reversely tighten up the hexagonal nut to the sensor with the spanner
--Check the air leak using soapy water
--The sensor needs motion activation. After the first installation, all data will be displayed after 5-10 minutes of driving
--If one of the sensors does not work properly after the first installation, reinstall and wait a while before proceeding
