Snow Performance Gas Stage 1 Boost Cooler Water/Methanol Injection KitPart Number 201
Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler™water methanol injection kit is available for all forced induction applications (Supercharged/Turbocharged) and uses a adjustable boost switch to inject a fixed amount of water methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost set ups, drag race applications, and vehicles with a positive displacement supercharger (Roots/Twinscrew) looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user chosen switch, such as a full throttle switch, nitrous switch, etc.
This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment™300 PSI UHO Pump is designed to be in the elements with O-Ring connections that are then sealed and potted at our Colorado facility to ensure no moisture can enter the pump internals. Compare this to pumps that us a pump \"sleeve\". These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat to greatly decrease pump life. The Stage 1 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL™ compressionfittings for guaranteed leak free operation even when using 100% methanol. For a extremely robust, reliable water methanol injection experience that won\'t brake the bank look no further than the Snow Performance Stage 1 Boost Cooler™!
Features:
- U.S.A. Made
- Adjustable Water Methanol Engagement & Monitoring
- Recommended For High HP, Drag Race, and Positive Displacement Supercharger Applications
- Supports 1,000+ HP
- 100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)
- Snow Performance Hyper-Sonic™Water Methanol Nozzle
- Snow Performance ACU-SEAL™Water Methanol Compression Fittings
- Snow Performance OEM Approved Extreme Environment™300 PSI UHO Water Methanol Pump
- Snow Performance Running \"S\" Engraved Low Profile Nozzle Holder
- Snow Performance Running \"S\" Engraved Low Profile High Flow Check Valve
Whats In The Box:Snow Performance Boost Cooler™Kit Box
Extreme Environment™300 PSI UHO (Ultra High Output) Water Methanol Pump (100% Methanol Resistant)
3 QT Water Methanol Tank
E-6000 Sealant (100% Methanol Resistant)
(1) 3/8\" NPT - 1/4\" Elbow ACU-SEAL™Compression Fitting (Nickel Plated 100% Methanol Resistant)
(2) 3/8\" NPT - 1/4\" Straight ACU-SEAL™Compression Fitting (Nickel Plated 100% Methanol Resistant)
(3) 1/8\" NPT - 1/4\" Straight ACU-SEAL™Compression Fitting (Nickel Plated 100% Methanol Resistant)
Snow Performance Hyper-Sonic™Water Methanol Nozzle (Stainless Steel 100% Methanol Resistant)
Snow Performance Low Profile Nozzle Holder (Hard Anodized 100% Methanol Resistant)
Snow Performance Low Profile High Flow Check Valve (Hard Anodized 100% Methanol Resistant)
20\' High Temperature Nylon Tubing (800 PSI Rating 100% Methanol Resistant)
18\" High Pressure Boost Line
Boost \"T\"
Green LED
Adjustable Boost Switch (1-15 PSI)
Relay Harness
20 AMP Fuse / Fuse Holder
Snow Performance Decal
Required Hardware Needed For Install
Type Of PumpProprietary 300 PSI UHO Pump, Dual Outlet EPDM Seals, Fully Adjustable, Proprietary Heat Dissipation Flange, (2) 1/4\" Push-lock Inlet/Outlet Fittings, Dimensions (4\"L x 7 1/4\"H x 3 3/4\"W - Including Mounting Bracket)Standard Reservoir3 Qt Reservoir, Black, Snow Performance Logo Red, Dimensions (8.63\"L x 10\"H x 4.12\"W - Including Tabs/Cap)ControllerAdjustable (1-15) PSI Boost SwitchNozzleTwo nozzles sized to your FWHP and boost levelsTubing1/4\" O.D. High Temp Nylon Tubing (800 PSI Burst Rating)AccessoriesFluid Level Sensor, Green/Red LEDs, Nozzle Holder/Check Valve ComboFitmentAll Forced Induction (Supercharged/Turbocharged) VehiclesWarrantySnow Performance 1-Year Warranty
Free shipping to the lower 48 states. If you are outside of this area please select a calculated shipping method or contact us for a discounted shipping quote.
