AUIMSOCO Authorized Store on
300% Brighter than Halogen: 6000K cool white, with clear visibility and perfect beam pattern, so you can enjoy good vision while driving at night.
Super Focused Beam Pattern: K9 plus led bulbs with 1.0mm ultra-thin centered light emitting. No dark spots or foggy light, do not blind oncoming traffic.
10mins Easy Installation: The LED bulb’s almost 1:1 design as halogen. Plug and play. No other tools are needed
360° Adjustable Beam Pattern: Adopts 360° adjustable locker ring to ensure the best beam pattern. except H1, H3, 880, PSX26W
50,000 hours Lifespan: K9 plus comes with a copper base board, cold pressed aluminum heat sink and 12,000rmp cooling fan. Better solve the dimming or over heated of led bulbs.
Need Canbus Decoder/ Resistor: These K9 plus series LED bulbs can work well on most vehicles. But when they cause the flickering issue or error code on your vehicle, you will need one pair of the decoder to cancel the error.
Package Included: 4pcs LED Bulbs + Manual. Our LED replaces halogen bulbs ONLY. It does not replace HID or LED from factory.
H13 Warm Tips:
if it is flickering(not quality problem), you need to buy this special resistor decorder to fix the problem:
Item Specifics
Model: K9 plus Series
Technology: LED
Fitment Type: Direct Replacement
Voltage: DC 9-16V
Color Temperature: 6000K
LED Chips: AUIMSOCO customized LED chips
LED Drivers: Built-in Drivers
Lifespan: Over 30,000 hours
Waterproof Rate: IP68 Water and Dust Seal, CE, RoHS
Operating Temperature: -40℃~+90℃
Warranty: 1 year warranty
Package Includes :
BRAND NEW 4PC
H13 （High/Low Beam）+ 9145/H10/9140 (fog light) LED Bulbs 6000K White
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the en of the bulb does not come in contact with the interior
