ENGINE GUARDIAN EG3c (New version, fully loaded with coolant sensor & bolt type sensor)
NEW FEATURE WITH PUSH BUTTON, EASY TO CHANGE SETTING, OIL PRESSURE SWITCH INPUT, 3 x RELAY CONTROL OUTPUT, WARNING TEMPERATURE SETTING FROM 0 ~ 150°C, PUSH BUTTON TO TEMPORARY INCREASE SETTING BY 5 °C, 10 °C FOR DRIVING MOUNTAIN ROAD
AND
"2 SENSORS INCLUDED, 1 x bolt sensor, 1 x coolant sensor"
"PUSH BUTTON"
"DUAL BUZZER"
" 3 RELAY OUTPUT, 3 RELAY + SOCKET INCLUDED"
"CONTROL FACTORY HORN AS OVERHEATING ALARM"
"OIL PRESSURE SWITCH INPUT"
"FREE 3 RELAY + SOCKET"
"FREE SHIPPING WORLDWIDE"
Minimum investment with maximum engine protection
"2 Years Warranty"
Monitor yourENGINE TEMPERATUREto prevent expensive engine repair
"Dual Buzzer,One in Digital Display, One in ECU,
with switch to turn on/off"
Real time monitoring engine temperature, Over heating temperature alarm and display.
Easy installation, work with any vehicle, Trucks, Tractors, Boats, Machines.
Engine Guardian EG3, This system can help to prevent overheating due to:
- Coolant loss
- Hose leaks
- Malfunctioning thermostat
- Blockage in the radiator or hose
- Malfunctioning water pump
- Detect any cooling system problem due to the age of part/s
OEM look digital display with buzzer, build inselectable inCelsiusorFahrenheit
Warning Temperature is Adjustable from 0°C~150°Cor 32°F~302°F
Detect Temperature from-19°C~165°Cor-2°F~ 329°F
Build in Cooling Fan Override Control and Horn control alarm (1 relay included, 3 relay output)
Engine Guardian EG3 - Dual Sensor Demo
Engine Guardian EG3 - Single sensor with 3 relay control
Engine Guardian EG3 - Oil Pressure Switch Input
Engine Guardian EG3 - Dual sensor with 3 relay control
Description:
Most vehicles have a temperature gauge, but it lacks the ability to provide an audible warning when problem exists. This system will show the real-time engine temperature on a digital display. If the engine overheats, the Engine Guardian will start beeping intermittently to warn the driver. When the engine temperature continuously climbing, it will beep continuously. The main purpose of this device is to protect the car engine from overheating.
Typically, the engine temperature will increase beyond normal operating temperatures before serious damage starts setting in. As the Engine Guardian will detect abnormally high engine temperatures, and provide an audio as well as visual guide to the operating temperatures of the engine, the driver will be able to judge and work to reduce the operating temperature (slow down, or stop the car for a while). This will reduce the repair cost and reduce the likelihood of needing and engine replacement. Additionally, the driver and passengers will not be stranded due to an overheated engine.
Feature:
- Alert driver when engine temperature is in the critical range.
- Optional function to override factory cooling fan system.
- Digital display of Simple wiring - Supplied external sensor.
- Three relay output control individually
- Rotatable display for easy mounting at any direction and any position.
- Smaller control unit for easy installation.
- Build-in speaker as backup output to alert using audible beeps.
- Oil pressure switch input.
Benefits:
-Prevent expensive engine repair.
-Real time monitoring of engine temperature
-Reduce likelihood of engine overheating and stranding the driver
-Can help to prevent overheating due to:
- coolant loss
- hose leaks
- malfunctioning thermostat
- blockage in the radiator or hose
- malfunctioning water pump
Bolt Type Sensor Specification:
Input voltage: 12 ~ 24Vdc
Detection temperature: -19°C ~ 150°C
Sensor wire length: 10 ft or 3 meter
Conduit for sensor wire: 5 ft
Coolant Sensor Specification:
Thread: 1/8"-27 NPT
Hex Size: 14mm
Installation Torque: 13.5Nm / 10 ft-lbs
Detection temperature: -19°C ~ 150°C
Sensor wire length: 10 ft or 3 meter
Conduit for sensor wire: 5 ft
Parts list:
1. ECU x 1 pc
2. Display x 1 pc
3. Bolt Type Sensor x1 pc
4. Coolant Sensor x1 pc
5. Push Button x 1 pc
6. Power cable x 1 pc
7.Input / Outputwire harness x 1 Set
8.12V 30A Relay + Relay socket x 3 Set
9. Accessories pack x 1 pc
Engine Guardian EG3 Complete Kit
Coolant Sensor with Water Proof wire harness
