Shroud fan- Wheel Truck Radiator
Core size: 20\" H X 17-1/4\" W
Overall size: 25-1/2\" H X 19-1/2\" W
Top tank inlets: 1-1/4\" Inch
Bottom tank inlets: 1-3/4\" Inch
Trans Cooler:φ26*250*M12*1.25
Vehicle Fitment
FORD FLATHEAD ENGINE 1932-1938 with transmission cooler stock height Truck V8, AT/MT
The overall height is 25-1/2\" which is the stock height,please check the listed dimension and picture to make sure this one work for your purpose before your purchase. This inlet is 1-1/4\" and outlet is 1-3/4\".
The New Design fan and theAA5052fan shroud effectively drive the heat over and out the engine compartment rather than thrusting it into the front of the engine. The fan shroud basically houses the fan blades securing it in place and keeping it from damaging the other engine components that may disturb the smooth and even operation of the engine. With excellent operating temperature management, allowable levels of engine temperature are stabilized. Investing in proper maintenance though will considerably benefit the ride and driving quality in maintaining the ideal working conditions of the engine.
1.Shuttered designAA5052fan shroud to guaranteed airflow passes high efficiently.Make your engine bay perfect!
2. S blade fans, Push or Pull Type design,lightweight Plastic Durable Material.
3. Additional with thermostat,professional matching advice, considerfor every detail and needed.
Wattage:120 Wattage
Number of Blades:10S-Typeblades
Thermostat Kit:
Universal fit for any automotive vehicle and electric fan.
Activates by grounding electric fans at preset temperature.
180\'F turn-on temperature, 165\'F turn-off temperature.
RED + connect directly to battery.
WHITE wire to ignition switch power source.
BLACK goes to thermos switch.
BLUE wire goes to the Fans.
DESCRIPTION:
OurRadiator is made of AA5052aircraft aluminum. Its different from other sellers T-3303 Series. In fact, AA5052seriesAluminumis much better than T-3303 series.
More than 90% of aftermarket manufacturers use the T-3303 seriesAluminum, because it is cheaper and easier to get the material. However, T-3303 aluminum has many disadvantages, such as poor polishing effect, softness, easiness to scratch and corrode, poor heat dissipation effect. If the T-3303 aluminum radiator is operated in high pressure and high temperature for a long time, the leaking problem would occur very soon.
AA5052Aluminum is an Al-Mg alloy with good corrosion resistance, excellent reliabilityand cold workability and strength. The main alloying element of AA5052is magnesium, which has good forming and processing properties. It is widely used in the manufacture of aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, hardware products, and electrical-appliance casings.
This AA5052Aluminum Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This AA5052Aluminum Radiator is at least 30%-45% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Features：
1.Made from AircraftAA5052grade aluminum for prolonged lifespanand with raw aluminum finish
2.Brazed core technology to guarantee optimum performance and dependability
3.AllAA5052Aluminum 2mm thick tanks and fittings,Ensure it\'s hard and durable
4.Billet Aluminum CNC machined fill neck rugged and durable
5.Ergonomic design CNC machined cap with Engraved craftsmanship, anodized treatment.
6.OEM style brass petcock drain much better than other plastic one on
7.Carefully crafted to exceptional OE standards for precise />
DELIVERY PAYMENT RETURNS WARRANTY response DELIVERY All orders will be sent within one business day after payment received(Except pre-sale products).
Note: Please contact for quote if international postage NOT display. PAYMENT
Paypal --the easiest and most secure way to pay on line
Bank Deposit
RETURNS
60 Days Free Return, please notify us within 60 days after you\'ve received your product.
Items to be returned must be in resalable condition.
Return Check List
Original packaging
PartsHawk RMA (return merchandise authorization) form
All accessories & hardware.
WARRANTY
Your warranty lasts for lifetime from the delivery date of your item. It covers functionality problems that occur with the auto part as a result of manufacturing. It does not cover damage caused by improper installation; by accidents or damage sustained after installation; or by negligence in maintaining the part after installation.
response
Very appreciated for your support. I hope you are happy with your purchase.
We maintain high standards of excellence and strive for 100% customer satisfaction! response is very important to us.
We request that you contact us immediately BEFORE you give us or response, so that we can satisfactorily address your concerns.
If you have any problem, please feel free to contact us via message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.
We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day!
Core size: 20\" H X 17-1/4\" W
Overall size: 25-1/2\" H X 19-1/2\" W
Top tank inlets: 1-1/4\" Inch
Bottom tank inlets: 1-3/4\" Inch
Trans Cooler:φ26*250*M12*1.25
Vehicle Fitment
FORD FLATHEAD ENGINE 1932-1938 with transmission cooler stock height Truck V8, AT/MT
The overall height is 25-1/2\" which is the stock height,please check the listed dimension and picture to make sure this one work for your purpose before your purchase. This inlet is 1-1/4\" and outlet is 1-3/4\".
The New Design fan and theAA5052fan shroud effectively drive the heat over and out the engine compartment rather than thrusting it into the front of the engine. The fan shroud basically houses the fan blades securing it in place and keeping it from damaging the other engine components that may disturb the smooth and even operation of the engine. With excellent operating temperature management, allowable levels of engine temperature are stabilized. Investing in proper maintenance though will considerably benefit the ride and driving quality in maintaining the ideal working conditions of the engine.
1.Shuttered designAA5052fan shroud to guaranteed airflow passes high efficiently.Make your engine bay perfect!
2. S blade fans, Push or Pull Type design,lightweight Plastic Durable Material.
3. Additional with thermostat,professional matching advice, considerfor every detail and needed.
Wattage:120 Wattage
Number of Blades:10S-Typeblades
Thermostat Kit:
Universal fit for any automotive vehicle and electric fan.
Activates by grounding electric fans at preset temperature.
180\'F turn-on temperature, 165\'F turn-off temperature.
RED + connect directly to battery.
WHITE wire to ignition switch power source.
BLACK goes to thermos switch.
BLUE wire goes to the Fans.
DESCRIPTION:
OurRadiator is made of AA5052aircraft aluminum. Its different from other sellers T-3303 Series. In fact, AA5052seriesAluminumis much better than T-3303 series.
More than 90% of aftermarket manufacturers use the T-3303 seriesAluminum, because it is cheaper and easier to get the material. However, T-3303 aluminum has many disadvantages, such as poor polishing effect, softness, easiness to scratch and corrode, poor heat dissipation effect. If the T-3303 aluminum radiator is operated in high pressure and high temperature for a long time, the leaking problem would occur very soon.
AA5052Aluminum is an Al-Mg alloy with good corrosion resistance, excellent reliabilityand cold workability and strength. The main alloying element of AA5052is magnesium, which has good forming and processing properties. It is widely used in the manufacture of aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, hardware products, and electrical-appliance casings.
This AA5052Aluminum Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This AA5052Aluminum Radiator is at least 30%-45% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Features：
1.Made from AircraftAA5052grade aluminum for prolonged lifespanand with raw aluminum finish
2.Brazed core technology to guarantee optimum performance and dependability
3.AllAA5052Aluminum 2mm thick tanks and fittings,Ensure it\'s hard and durable
4.Billet Aluminum CNC machined fill neck rugged and durable
5.Ergonomic design CNC machined cap with Engraved craftsmanship, anodized treatment.
6.OEM style brass petcock drain much better than other plastic one on
7.Carefully crafted to exceptional OE standards for precise
