H&R Wheel Spacers
Black EditionWidth: 2 x 15mm
PCD: 5x112
Centerbore: 66,5mm
H&R wheel spacer system DR Black EditionH&R Spacers DR 2x15mm B3055665 for INFINITI Q30 H&R TRAK+ Wheel spacers System DR improve the look as well as the handling of your car and are compatible with both stock and aftermarket wheels. Wheel spacers are an ideal complement to lowering springs or coilovers. By installing H&R spacers, the wheels fill the wheel arches properly, which significantly improves the look and the driving behavior.Product benefits:
High strength, light weight aluminium/magnesium alloyPrecision CNC machinedHard anodized for greater surface hardness and corrosion resistanceFit either stock or aftermarket wheelsCompatible with OEM and aftermarket suspension systemsEngineered and manufactured in GermanyThe H&R Spacers 2x15mm B3055665 should be fitted between the wheel and the axial hub using longer bolts not supplied (please order separately). When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length.All screws for the DR Systems have to be ordered separately.
Two Spacer (= for one axle)H&R product code: note additional information and vehicle-specifictechnical notes! DR = The wheel spacer should be fitted between the wheeland the axial hub using longer bolts not supplied - pleaseorder separately. When ordering the longer bolts pleasestate which cone type you require (i.e. taper round looseround or flat) and the required extra length. All screwsfor the DR systems have to be orderded separately. 2.) Only valid in Germany 20.) For these vehicles you can also use our 40 mmDRA-Systems or 30 40 mm DRM-Systems.Please see table No. 4.Vehicles System/ Notes Order No.ALFA ROMEO 4-hole DRA/20 40145801ALFA ROMEO 5-hole DRA/20 40155801AUDI 4-Loch Bolt pattern 108 DRA/20 4034571AUDI/VW 5-hole Bolt pattern 112 DRA/20 40555712AUDI/VW 5-hole Bolt pattern 100 DRA/20 4025571BMW E30 DRA/20 4024571BMW DRA/20 40757252BMW E39 DRA/20 40757402CITROEN/PEUGEOT DRA/20 40346501MERCEDES DRA/20 40556653MERCEDES W140/W215/W220 DRA/20 40556654OPEL 4-hole DRA/20 40245661OPEL 5-hole DRA/20 40456501RENAULT 4-hole DRA/20 4024601SEAT/SKODA 5-hole Bolt pattern 100 DRA/20 4025571SEAT/SKODA/VW 4-hole Bolt pattern 100 DRA/20 4024571PORSCHE DRM/15 8 30957166 25.) Not usable with steel-rims! 28.) Only for the rear axle. 3.) All DR-Systems require longer wheel-bolts. These haveto beordered separately. When ordering wheel-bolts pleasefollowthese guidelines:If possible name the type of the wheel when ordering.New bolts must be longer than the original ones by half ofthe total Track-widening.For example:With a 30 mm DR-kit you will require bolts that are 15 mmlonger than the original bolts.The bold-head must be identical to the existing bolt:Taper 60°Round-head for M12/d24 mm for M14/d28 mmRound-head for M12/d26 mm (e.g. OE VAG-wheels)Flat-head with disc for CITROEN/PEUGEOT-vehicles M12x1 25Flat-head for PORSCHE-original-wheels M14x1 5Safety Guidelines(No. of turns for wheel screws)M12x1 5 = 6 5 turns = approx. 10 mm of load bearing shaftlengthM12x1 25 = 8 0 turns = approx. 10 mm of load bearing shaftlengthM12x1 75 = 6 5 turns = approx. 12 mm of load bearing shaftlengthM14x1 5 = 7 5 turns = approx. 12 mm of load bearing shaftlength1/2\"UNF = 8 0 turns = approx. 11 mm of load bearing shaftlengthPlease ensure that the wheel screws do not damage any partof the brake system (ABS sensors etc.) Turn the wheelfirstby hand and check clearance on the inside (max. tolerancefor some vehicles is only 2 mm (RA Mercedes). 4.) For these vehicles because of the difference inaxle-caplength on the front axle our DR-System can only be usedifthe centering contour is drilled out. Because thecenteringstub can become thin-walled we do not produce thiscontourin series.Fits for:ManufacturerModelConstruction yearCertificateINFINITIQ3001.11.2015 --> TÜV**INFINITIQ3001.12.2015 --> TÜV**
TÜV**: Application based on TUV certificate.
ABE**: Application based on general operating license issued by german KBA.
FG**: Application based on max load testing report.H&R | Wheel SpacersH&R TRAK+ Wheel Spacers improve the look as well as the handling of your car while being compatible with both the stock and aftermarket wheels.Product Benefits:
high strength, light weight aluminium/ magnesium alloyPrecision CNC machinedHard anodized for greater surface hardness and corrosion resistanceAvailable in silver and black (depending on application)Fit either stock or aftermarket wheelsCompatible with OEM and aftermarket suspension systemsAvailable for a wide range of automobilesIncludes detailed mounting instructions for quick and easy installationDelivered with TUV or ABE approvalEngineered, manufactured and tested in Germany
