REKUDO RK100-21L Lower Control Arms Pair For Sale - New and Used

• Our store
• About Us
• Contact Us
• Add to Favorite Sellers

REKUDO Front Control Arms - Lower Pair RK100-21L

1970-1981 Chevrolet Camaro & Pontiac Firebird - Lower Control Arms. The Rekudo upper and lower control arms are one part of a fully engineered suspension system for the 1970-1981 Chevrolet Camaro & Pontiac Firebird. This suspension system is an auto-cross inspired modern suspension system that retains the original equipment (OE) appearance & strength with stamped steel control arms. The control arms feature EDP coating, heavy duty ball joints, offset washer inserts for easy caster adjustment, and factory style rubber bushings (optional Delrin bushings available separately). Control arms are available in upper & lower pairs, or a complete set of four control arms.Revised control arm design for better performance with an improved camber curve (must be used with with RK600-02 Spindles) - see Camber Curve Graph. See the Attached Alignment Recommendations for - for Daily Driver, Weekend Warrior, and Track Only vehicle applications.C3 Corvette Style Brakes Require 15\" Minimum Diameter Wheels.These upper & lower control arms are recommended for use with the following additional components of the Rekudo suspension system for the GM 2nd Generation F-Body (each part is sold separately):Spindles RK600-02 (pair) - spindles must be used 1968-1982 C3 Corvette style brakes.Front Springs RK200-11 (1\" lowered), or RK200-12 (2\" lowered)Front Shocks RK300-03 (2 required)Front Sway Bar RK500-02Front Hubs RK600-01 (2 required)Front Brake Dust Shields RK400-17 (pair)Rear Leaf Springs RK200-02 (pair)Rear Shackles RK200-08 (set)Rear Shocks RK300-04 (2 required)Delrin Control Arm Bushing Set RK100-20 (set). Control Arms Must Be Used with Spindles RK600-02 for Improved Camber Curve - See Camber Curve Graph. Control Arms are Not Recommended for use with stock spindles since there will be too much static negative camber. Note: 1970-1973 and some 1974 vehicles came from the factory with 1/2\" lower control arm pivot bolts, and 1974-1981 vehicles came from the factory with larger 9/16\" lower control arm pivot bolts. The REKUDO lower control arms use the larger 9/16\" control arm pivot bolts. Most 1970-1973 (and some 1974) vehicles may need to open up the lower control arm pivot bolt holes on the chassis with a 9/16\" drill bit. C3 Corvette Style Brakes Require 15\" Minimum Diameter Wheels.

• Modern Suspension Geometry with Original Equipment (OE) Style, Strength & Appearance
• Improved Camber Curve When Used with RK600-02 Spindles – See Camber Curve Graph
• Lowered Center of Gravity – for Improved Handling
• Easy Caster Adjustment with Offset Oval Shaped Washers that Fit Into the Upper Control Arm Pivot Shafts – Proper Caster Setup Improves Stability & Driver Confidence on Corner Entry
• Heavy Duty Ball Joints & Rubber Bushings – Pre-Installed in Control Arms
• Black EDP (Electro-Deposit Primer) Coating – for Corrosion Protection
• Easy Bolt-On Installation Using the Factory Control Arm Mounts
• Must Be Used with Tall Spindles RK600-02, and 1968-1982 C3 Corvette brakes – Ideal for Use with all the Other Components of the REKUDO Suspension System for the 2nd Gen F-Body
• Optional Delrin Bushings Available Separately – RK100-20
• C3 Corvette Style Brakes Require 15\" Minimum Diameter Wheels

General Policies

Warranty & Return Policy

• Holley Performance Products warrants new products to be free from defects in material and workmanship for a period of 90 days from date of purchase. Many items may have longer warranties please see Item Specifics above or contact us for information.
• Holley Performance Products Limited Warranty specifically does not apply to items or products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water,corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog.
• Warranties do not apply to items sold as Used. We want to make sure that every customer is completely satisfied with their purchase. Although obsolete, scratch & dent and used items do not have a warranty, we understand that things happen and every situation is different. Please let us know of any issues you may have before leaving response so we have an opportunity to make things right. We will do everything possible to make sure you are fully satisfied with your purchase and we want to earn your continued business!
• Buyer pays return shipping

Shipping & Tracking

• Please see the “Shipping and Payment” tab
• We ship all US orders via United Parcel Service (UPS Ground)
• A signature is required on all UPS orders over $750
• Tracking information will be sent via email after your package ships (you must supply a valid email address during checkout)
• We ship within 1 business day upon receipt of payment
• We do not ship to APO/FPO or US Post Office Box addresses
• We can not ship as a \"GIFT\" or ship anything internationally with changes to the invoice

Customer Service & response

• Our customer service hours are 8:00 am – 5:00 pm Central Time Monday thru Friday (excluding holidays)
• If you are not certain about an item or have questions, use the “Ask Seller a Question” link under the listing. We strive to answer questions submitted thru ’s message system within 1 business day
• We want you to be completely satisfied with your purchase – please let us know if you have any problems with your purchasebefore leaving responseso we have a chance to make it right – we want your repeat business!

Check out the official Holley Performancestorefor more great deals!!!

---