- AUTHORIZED DEALER
- AUTHENTICPART
Part Brand: Injen
Part Number: EVO9301
KEY FEATURES
- Direct Fit for
2021-2025 Ford Bronco V6-2.7L EcoBoost
- Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
- Custom tapered dual intake tube for increased airflow to both turbos
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
- Secondary Inlet for additional airflow OR to adapt to InjenâÂÂs upcoming snorkel system
- No Tune Required - Designed to work seamless with the stock calibration
- Unlike the competition, the Injen intake tube goes all the way to the turbo
- Aggressive under hood appearance while maintaining an OE fit
- Utilizes our patented Twist-Lock Filter attachment system
- Durable XLPE Roto-Molded Polyethylene tube and housing
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter # X-1116-BB
- Also available with a 8-Layer Oiled Air Filter: Intake system P/N EVO9301C
- Stainless steel band clamps with inner protective liner
- Aggressive under hood appearance while maintaining an OE fit
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. Vehicle Fitment
- 2021–2026 Ford Bronco 2-Door and 4-Door models
- Engine: 2.7L EcoBoost V6 Twin Turbo
Features
- Dyno-proven gains of up to 26 horsepower and 27 lb-ft of torque
- Custom tapered dual intake tube for increased airflow to both turbos
- Large forward-facing inlet is twice the size of OE to maximize incoming cool air
- Secondary inlet for additional airflow or to adapt to Injen’s upcoming snorkel system
- No tune required; designed to work seamlessly with the stock calibration
- Intake tube extends all the way to the turbo for optimal airflow
- Constructed from durable XLPE Roto-Molded Polyethylene
- Utilizes Injen’s patented Twist-Lock Filter attachment system
- Includes fully serviceable Injen SuperNano-Web dry air filter
- Stainless steel band clamps with inner protective liner
- Reinforced automotive-grade silicone couplers
- Clear inspection badge allows quick filter condition checks
- Made in Pomona, California, USA
- Backed by Injen Technology’s Limited Lifetime Warranty
Specifications
- Part Number: EVO9301
- Material: XLPE Roto-Molded Polyethylene
- Filter Type: SuperNano-Web Dry Air Filter
- Filter Color: Blue
- Horsepower Gain: Up to 26 HP
- Torque Gain: Up to 27 lb-ft
- Installation Time: Approximately 1 hour
- Warranty: Limited Lifetime Warranty
- CARB Status: Not CARB exempt; not legal for sale or use in California or other states that adhere to CARB regulations
Included Components
- 1x Injen EVO9301 Cold Air Intake System
- 1x SuperNano-Web Dry Air Filter (Blue)
- All necessary mounting hardware
- Installation instructions
Product Description
The Injen EVO9301 Evolution Cold Air Intake System is engineered to enhance the performance of your 2021–2025 Ford Bronco equipped with the 2.7L EcoBoost V6 engine. This intake system delivers dyno-proven gains of up to 26 horsepower and 27 lb-ft of torque, providing a noticeable improvement in throttle response and overall engine performance.
Featuring a custom tapered dual intake tube, the EVO9301 ensures increased airflow to both turbos, while the large forward-facing inlet--twice the size of the original equipment--maximizes the volume of cool air entering the system. The secondary inlet offers additional airflow and is designed to adapt to Injen’s upcoming snorkel system, enhancing off-road capabilities.
Constructed from durable XLPE Roto-Molded Polyethylene, the intake system includes Injen’s patented Twist-Lock Filter attachment system and a fully serviceable SuperNano-Web dry air filter. Installation is straightforward, requiring no tuning, and all necessary hardware is included. Proudly made in the USA, the EVO9301 is backed by Injen Technology’s Limited Lifetime Warranty.
Note: This product is not currently CARB exempt and is not legal for sale or use in California or other states that adhere to CARB regulations.
*Parts are for USA spec vehicles, please contact us to verify fitment on JDM & international models.
· · · SHIPPING · · ·
- Free shipping across the contiguous 48 United States (excludes Hawaii and Alaska). Item(s) ships on the same day or within 1 business day. Delivery time is within 2 to 4 business days excluding next day deliveries. Orders over $750 require signature for delivery.
- Canada customers - If does not collect import & duty fees during checkout, the shipping carrier will collect them prior to delivery.
· · · RETURNS · · ·
Your complete shopping satisfaction is our #1 priority. If an item you ordered from us does not meet your expectations, please contact us within 30 days of receiving the item(s). If your order arrives damaged from shipping please contact us and we will provide a prepaid return label to send back for a replacement or refund.
- Returned items must be in the original packaging (including plastic wrapped items) and in brand new condition.
- Any returns received installed, mounted, used or missing components will be subject to return fee\'s.
· · · PAYMENTS · · ·
- We accept all payment methods through \'s payment system
- PayPal, and all major credit cards/debit cards are accepted.
· · · response · · ·
- Customer satisfaction is a top priority for us. If you have any issues with your order, please let us know. We will make every effort to resolve any problems and ensure you are satisfied.
· · · CONTACT US · · ·
- We appreciate your business. If you have any questions, please message us through and we will respond within 24 hours on weekdays. Feel free to browse our store for other available items. Thank you again for choosing to shop with us!
Powered By 3Dsellers.com - Try for Free!
