Description Fitment: Fits for front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Basic Instructions: Attach bottle to helm reservoir (do not pierce bottle)(do not let bottle run empty) Connect bridge tube to bleed fittings on steering cylander and loosen/open fittings. Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm. Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed. Note: Orientating bleed fittings up while pumping fluid with helm will allow air to escape cylinder. Repeat 3-4 as necessary until no air is visible in bridge tube. Tighten bleed fittings before removing bridge tube Description: 100% Brand New According to original factory specifications, perfect match to original car. Made of high quality material. Easy to install. Parts are from certified professional factory. Content: 1 x Bleed Kit For Seastar（HS5157）
Product Highlights Using Instruction:
|Loosening the Seal Gland. Turn the outboard hard to port; place the pin wrench in the holes of a gland. And use a 5⁄8-inch box wrench on the nut on the port end of the piston rod. (NOTE:Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland)
|Removing the Support Bracket. Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. (Do the same to the piston rod nut and washer. ) Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket.
|Use the pin wrench to remove the Old Seal Gland.
|Install the New Seal Gland. Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don\'t tighten it yet. Remove the guide tool; it is not part of the final assembly, but you will need it for the other side.
|Reinstall the Support Bracket. Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently.
|Tightening the New Seal Gland. Use the pin wrench to tighten the new seal gland while using a 5⁄8-inch box wrench on the starboard end of the piston rod for counter torque. Package includes 1 x Bleed Kit For Seastar（HS5157） Payment Shipping Returns Contact Us 1. All payments must be prepaid.
2. We only accept payments through \'s official designated methods. Please check if you can make payment through before placing an order. Payment must be received within 7 days after placing the order. 1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
2. Items are generally shipped out the next business day after your payment has been cleared (Sat. & Sun. excluded.)
NOTE：Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-7 working days to:USA
1. We offer 30 days money back guarantee return policy. 2. Our warranty does not extend to products, are physically damaged or are not under normal operating conditions due to misuse or improper installation by the buyer/user. 3. Please choose \"I don\'t like this item\" or \"change your mind\" as your return reason, this will make the return faster to proceed, Or we may not accept. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00
1. We are in different time zones, during the working time, we will reply your email within 24 hours. If it\'s non-workdays, please kindly be patient and considerable to give us a little more time.
2, please with message if we made a deal on . E-mail is often filtered as spam.
3, Please wait for our reply to your email, we will do our best to help you solve the problem.
