Autumnwish Auto Art SoCal Aero / Body Kit Specialist 1 Business Day Handling 30 Days Returns Fast Message Support C Style Rear Bumper Lip – PU (Unpainted)
Refresh the rear end with a clean OEM+ look. Durable flexible PU for daily-driven and show cars.
One-piece flexible PU design: fewer seams/joints for a cleaner, more continuous look after test-fit — and more forgiving for real-world daily driving than rigid plastics. Quick Fitment Check (We Can Help)
This lip is designed for 2004-2006 Lexus LS430 with OEM rear bumper. If you’re not 100% sure your bumper is OEM, message us a quick photo — we reply fast and will help confirm fitment.
Included
(1) One-piecerear bumper lip (PU, unpainted)
Mounting accessories (hardware/tape) only if shown in the listing photos (may vary by batch)
Product Details
- 100% brand new — never installed, direct from Autumnwish Auto Art
- C style rear bumper lip for a clean, aggressive OEM+ look
- Material: Flexible PU (Polyurethane) — more durable and impact-resistant than fiberglass
- Finish: Unpainted / raw PU — prep + paint required for color match
- Designed to follow OEM bumper lines for a flush, factory-like appearance
- Lightweight and strong — ideal for daily-driven and show cars
- One-piece PU design — fewer seams/joints for a cleaner look after test-fit
- Flexible for daily use — helps reduce the chance of cracking from minor bumps/driveway contact vs rigid plastics
Unpainted PU Notes / Arrival Shape This is an unpainted raw PU part. Minor surface texture, light molding lines, small waves, or minor handling marks can be normal and are typically addressed during prep / paint. Always TEST-FIT before paint.
- PU is flexible by design and may arrive in a gentle rounded or compact-packed shape after transit
- A rounded, curved, or temporarily compressed arrival shape is normal for flexible PU and does not mean the item is damaged
- After unpacking, lay the lip flat in a warm area or under sunlight for 1–4 hours
- Gentle warm air from a hair dryer on low heat may help the PU material relax
- Do not use high heat or force while cold
- Please review the gallery image titled “UNPACK • RELAX • TEST FIT” for a quick visual reference before installation
Finish Note (Unpainted Raw PU): Final finish (gloss / satin / matte) depends on your prep & paint choice for your desired look. Tools & Materials (Not Included)
- 3M automotive double-sided tape + adhesion promoter (recommended)
- Screws/bolts + drill bits (if needed)
- Cleaner (soap/alcohol), sandpaper, primer, and paint if finishing
Shipping & Arrival Checklist (Fastest Resolution)
- After opening, take clear photos of the item and packaging
- Message us with photos — we can resolve issues much faster this way
Installation Prep (Recommended)
- Always TEST-FIT before paint, drilling, trimming, or final installation
- Drilling is required in most cases (mounts to the bottom of the OEM rear bumper)
- Surface must be clean and dry for best adhesion
- Screws/bolts may be used for reinforcement depending on bumper condition
- One-piece tip: mark mounting points during test-fit, then install evenly from center outward for best alignment
Installation (Important)
- Installation manual is not included — this is a DIY / professional installation item
- Drilling is required in most cases (mounts to the bottom of the OEM rear bumper)
- Always TEST-FIT on the vehicle before any paint / drill / cut / sand
- Prep work is required for best paint results (clean, sand, prime, paint)
- Some trimming/adjustment may be necessary depending on bumper condition and prior repair history
- Professional body shop installation is highly recommended
Final Notes / Responsibility Return Note (Policy & Item Condition)
