Our new cut to fit pushrod sets are just what you need if you don\'t know exactly what your finished pushrod length should be. These 3/8\" .062\" wall pushrods are made from heavy duty aircraft quality 4130 CHROME MOLY steel. They come with the 3/8\" ball end (bottom end) of the pushrods assembled, however the top (cup) end comes unassembeled, so that you can cut the tubing down to the exact length you need. The cups on these are designed for a 5/16\" ball size on the bottom of the rocker adjuster. Maximum length is 10.00\" (if they were put together without shortening the length,) and these pushrods can be cut down to any length shorter than that. While we recommend cutting the tubing on a lathe for the straightest possible cut, if you are in a pinch, these can also be cut with a cutoff wheel. The ends can be pressed in with a press, or (in a pinch) tapped in with a mallet if necessary. A great way to ensure you\'ll be getting the correct length pushrods, without having to mess with multiple orders, custom made parts, etc.
These also work great for all Big Block Mopar TRICKFLOW Heads.These DO NOT have oiling holes. They do not oil through the pushrod, since they are for a Big Block Mopar engine, which oils through the rocker shafts, not the pushrods.
![Cut to fit pushrods for Mopar Big Block - Set of 16- Up to 10.00\](parts-image-large/g/3BcAAeSwABRqsVaM/s-l1600/Cut-to-fit-pushrods-for-Mopar-Big-Block-Set-of-16-.jpg "Cut to fit pushrods for Mopar Big Block - Set of 16- Up to 10.00\")
