OverviewOverview
The Evolution Series 2-in-1 tail (rear-facing) nav/strobe assembly is a true to form, direct replacement for legacy Whelen and Grimes tail nav/position light fixtures with 12-volt electrical systems. Replaces the inefficient, but alsofailure prone filament-type fixtures with high-efficiencyextreme output led technology. The assembly incorporates two independent circuits: 1- Continuous duty white nav light; 2- High-intensityLED strobe/anti-collision light.
The Evolution taillight assembly\'s high intensity strobe circuitis totally self contained which eliminates the need for remote strobe power supplies that are heavy and notorious for creating radio interference.
NON-TSO; NOT APPROVED OR INTENDEDFOR INSTALLATION ON CERTIFIED anti-collision strobe - instantly add safety/visibility enhancing strobes without the hassle of heavy (and notorious for RF interference) remote mounted strobe power supplies.
Direct replacement fixture - eliminates extra drilling and paint/bodywork time and cost.Maintenance Free - Eliminate recurrent maintenance time/cost
Soldi-state circuitry for years of trouble-free service life eliminates maintenance time and cost associated with legacy filament bulbs and strobe tubes/power supplies.Extreme LED brightness- many times brighter than legacy filament products.Low current - Brighter, but draws a fraction of the current of the legacy filament bulbsNo external power supplies - Reduces weight and installation complexities. Requires only power (12-volt DC) and ground with optional sync wire for strobe synchronizationif desired).EMI/RFI-Free - No more frustrating audio noise from high current and/or high voltage strobe power supplies.Low voltage - only requires buss voltage, which eliminates chances of electrical shock from high voltage power supplies while performing Series | LED 2-in-1 Tailfin Nav/Strobe Assembly
Voltage:10.5~15 Volt DCPower:Nav: 0.62amps (8.68watts)
Strobe: 1.12ampsPeak; 0.40 Avg
Dimensions:2.16\"L x for non-certified applications onlyDESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTSIN THEUSAEvolution Series | LED 2-in-1 Tailfin Nav/Strobe Assemblies DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA The Evolution Series 2-in-1 tail (rear-facing) nav/strobe assembly is a true to form, direct replacement for legacy Whelen and Grimes tail nav/position light fixtures with 12-volt electrical systems. Replaces the inefficient, but also failure prone filament-type fixtures with high-efficiency extreme output led technology. The assembly incorporates two separate circuits: 1- Continuous duty white nav light; 2- High-intensity LED strobe/anti-collision light. The Evolution taillight assemblies are designed as direct replacements to the legacy taillight fixtures and also includes a high intensity strobe circuit that is totally self contained which eliminates the need for remote strobe power supplies that are heavy and notorious for creating radio interference. NON-TSO; NOT APPROVED OR INTENDED FOR INSTALLATION ON CERTIFIED AIRCRAFT ---Integrated anti-collision strobe - instantly add safety/visibility enhancing strobes without the hassle of heavy (and notorious for RF interference) remote mounted strobe power supplies. ---Direct replacement fixture - eliminates extra drilling and paint/bodywork time and cost. ---Maintenance Free - Eliminate recurrent maintenance time/cost - designed to perform for thousands of hours which eliminates time and cost associated with legacy filament bulbs and strobe tubes/power supplies. ---Extreme LED brightness - many times brighter than legacy filament products. ---Low current - Brighter, but draws a fraction of the current of the legacy filament bulbs ---No external power supplies - Reduces weight and installation complexities. Requires only power (12-volt DC) and ground with optional sync wire for strobe synchronization if desired). ---EMI/RFI-Free - No more frustrating audio noise from high current and/or high voltage strobe power supplies. ---Low voltage - only requires buss voltage, which eliminates chances of electrical shock from high voltage power supplies while performing maintenance. Voltage: 10.5~15 Volt DC Power: Nav: 0.62amps (8.68watts) Strobe: 1.12amps Peak; 0.40 Avg Dimensions: 2.16\"L x 1.71\"W Weight: 0.16lb Certifications: Intended for non-certified applications only OverviewThe Evolution Series 2-in-1 tail (rear-facing) nav/strobe assembly is a true to form, direct replacement for legacy Whelen and Grimes tail nav/position light fixtures with 12-volt electrical systems. Replaces the inefficient, but alsofailure prone filament-type fixtures with high-efficiencyextreme output led technology. The assembly incorporates two independent circuits: 1- Continuous duty white nav light; 2- High-intensityLED strobe/anti-collision light.
The Evolution taillight assembly\'s high intensity strobe circuitis totally self contained which eliminates the need for remote strobe power supplies that are heavy and notorious for creating radio interference.
NON-TSO; NOT APPROVED OR INTENDEDFOR INSTALLATION ON CERTIFIED anti-collision strobe - instantly add safety/visibility enhancing strobes without the hassle of heavy (and notorious for RF interference) remote mounted strobe power supplies.
Direct replacement fixture - eliminates extra drilling and paint/bodywork time and cost.Maintenance Free - Eliminate recurrent maintenance time/cost
Soldi-state circuitry for years of trouble-free service life eliminates maintenance time and cost associated with legacy filament bulbs and strobe tubes/power supplies.Extreme LED brightness- many times brighter than legacy filament products.Low current - Brighter, but draws a fraction of the current of the legacy filament bulbsNo external power supplies - Reduces weight and installation complexities. Requires only power (12-volt DC) and ground with optional sync wire for strobe synchronizationif desired).EMI/RFI-Free - No more frustrating audio noise from high current and/or high voltage strobe power supplies.Low voltage - only requires buss voltage, which eliminates chances of electrical shock from high voltage power supplies while performing Series | LED 2-in-1 Tailfin Nav/Strobe Assembly
Voltage:10.5~15 Volt DCPower:Nav: 0.62amps (8.68watts)
Strobe: 1.12ampsPeak; 0.40 Avg
Dimensions:2.16\"L x for non-certified applications onlyDESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTSIN THEUSAEvolution Series | LED 2-in-1 Tailfin Nav/Strobe AssembliesDESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTSIN THEUSAThe Evolution Series 2-in-1 tail (rear-facing) nav/strobe assembly is a true to form, direct replacement for legacy Whelen and Grimes tail nav/position light fixtures with 12-volt electrical systems. Replaces the inefficient, but alsofailure prone filament-type fixtures with high-efficiencyextreme output led technology. The assembly incorporates two separate circuits: 1- Continuous duty white nav light; 2- High-intensityLED strobe/anti-collision light.
The Evolution taillight assemblies are designedas direct replacements to thelegacy taillight fixtures and also includes a high intensity strobe circuit that is totally self contained which eliminates the need for remote strobe power supplies that are heavy and notorious for creating radio interference.
NON-TSO; NOT APPROVED OR INTENDEDFOR INSTALLATION ON CERTIFIED AIRCRAFT
