4Pcs 1" Hub Centric Wheel Spacers For Toyota Corolla Yaris MR2 Scion xB xA 4x100 For Sale - New and Used

FITMENT:

Fiat 124 Spider 2017-2020

Ford Escort 1991-2001

Kia Rio 2001-2020Kia Sephia 1994-2001Kia Spectra 2000-2004

Mazda 2 2011-2014Mazda Miata 1990-1997&1999-2005Mazda MX-5 Miata 2016-2019Mazda Protege 1995-2003(4 Lug Model ONLY)

Scion iA 2016Scion iQ 2012-2015Scion xA 2004-2006Scion xB 2004-2006

Toyota Celica 1986-1991(Does Not Fit GTS Model)Toyota Corolla 1993-2002Toyota Echo 2000-2005Toyota MR2 1985-1989Toyota MR2 Spyder 2000-2005Toyota Prius C 2012-2019Toyota Tercel 1989-1997Toyota Yaris

4Pcs 1" Hub Centric Wheel Spacers For Toyota Corolla Yaris MR2 Scion xB xA 4x100

FITMENT:

Fiat 124 Spider 2017-2020

Ford Escort 1991-2001

Kia Rio 2001-2020
Kia Sephia 1994-2001
Kia Spectra 2000-2004

Mazda 2 2011-2014
Mazda Miata 1990-1997&1999-2005
Mazda MX-5 Miata 2016-2019
Mazda Protege 1995-2003(4 Lug Model ONLY)

Scion iA 2016
Scion iQ 2012-2015
Scion xA 2004-2006
Scion xB 2004-2006

Toyota Celica 1986-1991(Does Not Fit GTS Model)
Toyota Corolla 1993-2002
Toyota Echo 2000-2005
Toyota MR2 1985-1989
Toyota MR2 Spyder 2000-2005
Toyota Prius C 2012-2019
Toyota Tercel 1989-1997
Toyota Yaris

Spacer Thickness：1 inch or 25 mm

Vehicle bolt pattern：4x100 mm

Wheel bolt pattern：4x100 mm

Thread Size：12x1.5

Hub Bore：54.1 mm

NOTE：

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE).

​

How to Install Wheel spacers: Step-by-Step Instructions Guide

Suppose you already have a high-quality wheel spacer.The following is what you will need to do to install wheel spacers in your vehicle:

Step 1: Loosen the Lug Nuts

Step 2: Lift the Vehicle

Step 3: Remove the Wheel

Step 4: Clean the Hub

Step 5: Install the Spacer

Step 6: Apply Thread Locker

Step 7: Secure the Spacer

Step 8: Reinstall the Wheel

Step 9: Lower the Vehicle

Step 10: Final Torque

Item SpecificsBrand everpartstorecsType Wheel SpacerManufacturer Part Number 12273818Manufacturer Warranty 1 YearMaterial AluminumColor SilverVehivle Bolt Pattern 4x100Wheel Bolt Pattern 4x100Features Easy InstallationHub Bore 54.1mmThread Size 12x1.5Thickness 1"Vintage Car Part NoPerformance Part NoUniversal Fitment NoHuncentric YesQuantity 4Surface Finish CNC Machined Polished Aluminum FinishBolt Shank Length 35mmTorqued Down By Hand At 70-80 FT/LBSStud Grade 10.9Package Gross Weight 9.96lbLug Patterns 4 Lugs
Shipping

tellusthenewaddresswithin 12 hoursafterpayment

(nodeliverytoremoteareas).

Anypayments accepted by also can be accepted.

Service

within30days.

Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

STORE HOMEHOT SELLINGCOOL SUMMERSENSORSEXTERIOR Shop CategoryStore Home lift support Condenser Air Diesel Heater Blower Resistor Blower Motor Heater Core Suspension Kits Thermostat Housing ABS Wheel Speed Sensor Window Switch Oxygen Sensor 3Rd Brake Light Mass air flow sensor AC Compressor Cooling Fan Towing Mirrors Door Handle Radiator Sensor Knock Sensor Catalytic Converter Window Regulator Wheel Spacers Alternator Headlight Assembly Fuel Pump Assembly Leveling Lift Kits Spoiler Wing CV Axle Wheel Hub Bearing Knuckle Turbocharger Windshield Wiper Motor Engine Mount Head Gasket Set complete strut 4 Pcs Wheel Hub Bearing Wheel Hub Bearing Tire Anti-skid Chain Brake caliper Shocks Struts Air Suspension Brake rotor pad Struts & Suspension Kit & Hubs Other

4Pcs 1" Hub Centric Wheel Spacers For Toyota Corolla Yaris MR2 Scion xB xA 4x100

FITMENT:

Fiat 124 Spider 2017-2020

Ford Escort 1991-2001

Kia Rio 2001-2020
Kia Sephia 1994-2001
Kia Spectra 2000-2004

Mazda 2 2011-2014
Mazda Miata 1990-1997&1999-2005
Mazda MX-5 Miata 2016-2019
Mazda Protege 1995-2003(4 Lug Model ONLY)

Scion iA 2016
Scion iQ 2012-2015
Scion xA 2004-2006
Scion xB 2004-2006

Toyota Celica 1986-1991(Does Not Fit GTS Model)
Toyota Corolla 1993-2002
Toyota Echo 2000-2005
Toyota MR2 1985-1989
Toyota MR2 Spyder 2000-2005
Toyota Prius C 2012-2019
Toyota Tercel 1989-1997
Toyota Yaris

Spacer Thickness：1 inch or 25 mm

Vehicle bolt pattern：4x100 mm

Wheel bolt pattern：4x100 mm

Thread Size：12x1.5

Hub Bore：54.1 mm

NOTE：

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE).

​

How to Install Wheel spacers: Step-by-Step Instructions Guide

Suppose you already have a high-quality wheel spacer.The following is what you will need to do to install wheel spacers in your vehicle:

Step 1: Loosen the Lug Nuts

Step 2: Lift the Vehicle

Step 3: Remove the Wheel

Step 4: Clean the Hub

Step 5: Install the Spacer

Step 6: Apply Thread Locker

Step 7: Secure the Spacer

Step 8: Reinstall the Wheel

Step 9: Lower the Vehicle

Step 10: Final Torque

ShippingPaymentServiceNote

tellusthenewaddresswithin 12 hoursafterpayment

(nodeliverytoremoteareas).

Anypayments accepted by also can be accepted.

within30days.

Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

---