NOTE!!!
Please double check you are ordering the correct item before you place your order. we will ship the item listed, and cannot be held responsible if you order the wrong part. Please contact us to verify fitment if unsure.
These Adapters Will Change Your Truck's 8x170MM Bolt Pattern To 10x225 MM.
FEATURES
Made Out of 6061 T-6 Aluminum Billet Bars
Allows You To Put 19.5 Wheels On Your Truck
These Adapters Will Work With Alcoa & Aftermarket Wheels
Hub/Wheel Centric: Will Not Vibrate At High Speeds
Improve Vehicles Handling Characteristics
Enhance Vehicle Appearance; Aggressive Stance
Specifically Design For Extreme Duty Vehicles, Towing Safe
We Have Towed 36,000 LBS With Our Adapters
SPECIFICATIONS
Vehicle Bolt Pattern: 8x170MM
Vehicle Hub Bore: 124.9MM
Wheel Bolt Pattern: 10x225 MM
Wheel Bore: 170.1mm (6.69" in) Thread Pitch: 14x1.5
Thickness: 1.5"
Front Wheel Lip: 0.50"
Rear Wheel Lip: 1.5"
Material : Billet Aluminum 6061 T-6
Hardware: 10.9 Steel
Finish: Raw Finish
Torque Specs: Factory Specs Recommended
EXTRA INFORMATION:
THE FRONT WHEEL ADAPTERS COME WITH A 1/2" IN LONG HUB THAT IS ENOUGH TO HOLD THE SINGLE WHEEL ON THE ADAPTER.
THE REAR ADAPTERS WITH A 3/4" IN LONG HUB ENOUGH TO HOLD THE SUPER SINGLE WHEEL ON THE ADAPTER.
THE REAR ADAPTERS WITH A 1" LONG HUB IS FOR DUAL STEEL WHEELS.
THE ADAPTERS WITH A 1.25" LONG HUB IS FOR A SET OF INNER STEEL AND OUTER ALUM WHEELS.
THE ADAPTERS WITH A 1.50" LONG HUB IS FOR DUAL ALUMINUM WHEELS.
