SINCERE GEAR REMANUFACTURED TRANSMISSION SPECIALISTS ``` 2016-2020 Nissan Rogue 2.5L AWD
JF016E / RE0F10D CVT Transmission
JF016E • RE0F10D • 2.5L QR25DE • AWD • OEM 31020-3VX1D • Warranty Included
⚠ VIN FITMENT VERIFICATION REQUIRED
Do not rely solely on 's compatibility chart.
Please send us your complete 17-digit VIN before or immediately after ordering so we can verify the correct AWD CVT application.
IMPORTANT PURCHASE INFORMATION $500 REFUNDABLE CORE DEPOSIT — NOT INCLUDED IN PRICE 3-MONTH / 3,000-MILE LIMITED PARTS WARRANTY INCLUDED EXTENDED WARRANTY & ALTERNATIVE CORE OPTIONS MAY BE AVAILABLE Vehicle Nissan Rogue Model Years 2016-2020 — VIN verification required Engine 2.5L 4-Cylinder QR25DE Transmission JF016E / RE0F10D CVT8 Drivetrain AWD / All-Wheel Drive OEM Reference 31020-3VX1D — superseding/interchange numbers may apply Condition Professionally Remanufactured Core Deposit $500 additional refundable deposit — not included in price Warranty 3 Months / 3,000 Miles Limited Parts Warranty WHY BUY FROM SINCERE GEAR? ✓ Professionally remanufactured CVT assembly ✓ VIN-based fitment verification before shipment ✓ Internal components inspected and serviced as required ✓ AWD-specific Rogue CVT application ✓ Freight shipping throughout the continental United States ✓ 3-month / 3,000-mile limited parts warranty included ✓ Extended limited warranty options may be available THIS LISTING IS FOR
2.5L QR25DE 4-CYLINDER ENGINE
AWD / ALL-WHEEL DRIVE
JF016E / RE0F10D CVT8 TRANSMISSION
OEM REFERENCE 31020-3VX1D
⚠ DOES NOT FIT
- FWD / 2WD Rogue models requiring a different CVT configuration
- Rogue Sport / Qashqai applications
- Vehicles requiring a different CVT code or final-drive configuration
- Units with incompatible OEM or interchange numbers
- Applications outside the listed configuration without written fitment confirmation
PROFESSIONALLY REMANUFACTURED JF016E CVT
This 2016-2020 Nissan Rogue 2.5L AWD JF016E / RE0F10D CVT transmission has been professionally remanufactured, assembled, inspected, and prepared for installation.
The remanufacturing process includes inspection, replacement, or servicing of applicable components including:
- CVT belt and pulley-related wear components as applicable
- Clutches and friction components
- Seals, gaskets, O-rings, and sealing rings
- Bearings and bushings as required
- Valve-body components as applicable
- Solenoids as applicable
- Internal hydraulic components
- Differential and transfer-related internal components as applicable
- Damaged or out-of-specification hard parts
- Additional internal components as required during remanufacturing
The CVT is professionally assembled and inspected with the goal of providing dependable, factory-style operation when properly installed, filled, programmed, calibrated, and maintained.
⚠ FITMENT VERIFICATION REQUIRED
DO NOT PURCHASE BASED ONLY ON 'S COMPATIBILITY CHART.
Please message us with:
- Complete 17-digit VIN
- Vehicle year
- Vehicle production date
- Original transmission OEM number, if available
- Transmission stamp/code, if available
- Confirmation that the vehicle is AWD
- Any additional identification shown on the original transmission
Nissan Rogue CVT applications can vary by production date, drivetrain, transmission stamp code, final-drive configuration, valve-body calibration, electronics, software, and OEM transmission number.
VIN VERIFICATION HELPS PREVENT FITMENT ERRORS.
IF THE REPLACEMENT CVT APPEARS DIFFERENT FROM YOUR ORIGINAL UNIT, CONTACT US BEFORE INSTALLATION. INSTALLATION, PROGRAMMING & INITIALIZATION REQUIREMENTS
Professional installation by a qualified automotive repair facility is required.
Before and during installation, the installer must:
- Compare the replacement CVT to the original before installation
- Verify transmission stamp code, OEM numbers, connectors, case configuration, and mounting points
- Use the correct Nissan-specified CVT fluid
- Replace applicable seals, gaskets, filters, O-rings, and one-time-use components
- Properly flush or replace the CVT cooler and cooler lines where applicable
- Confirm proper cooler flow before operating the vehicle
- Perform all required TCM programming and configuration procedures
- Perform applicable CVT initialization, calibration, reset, and adaptive-learning procedures
- Perform IP characteristic / calibration-data registration when required
- Follow Nissan-approved CVT fluid filling and fluid-level procedures
- Correct all related electrical, sensor, wiring, cooling, engine, AWD, and control-module faults
IMPORTANT: JF016E / RE0F10D applications may require TCM configuration, calibration-data registration, and relearn procedures after transmission or valve-body replacement. Failure to complete all required procedures may cause improper CVT operation or diagnostic trouble codes. Labor, installation, removal, diagnostics, programming, calibration, fluids, filters, seals, maintenance items, towing, and related repair costs are not included unless specifically agreed to in writing. TRANSMISSION COOLER REQUIREMENTS
Debris and contamination from a failed CVT can remain inside the transmission cooler and cooler lines.
The installer must inspect the complete cooler circuit and properly flush or replace contaminated or restricted components as required before operating the replacement transmission.
Failure to correct cooler contamination or restriction can cause repeat CVT failure and may affect warranty eligibility.
FREIGHT SHIPPING STANDARD FREIGHT SHIPPING: $350
Standard freight shipping applies to a qualifying commercial/business address with a forklift or loading dock, or shipment to an approved local freight terminal for customer pickup.
Please contact us before purchasing if you require:
- Residential delivery
- Liftgate service
- Limited-access delivery
- Remote-area delivery
- Construction site, farm, school, storage facility, or other special-access delivery
- Any special freight handling requirements
Additional carrier charges may apply.
All shipping and delivery dates are estimates only and are not guaranteed. Freight transit can be affected by carrier scheduling, terminal transfers, weather, mechanical delays, and other circumstances outside the seller's control.
DO NOT SCHEDULE INSTALLATION SOLELY AROUND AN ESTIMATED FREIGHT DELIVERY DATE. FREIGHT DELIVERY INSPECTION
Inspect the transmission, pallet, wrapping, and packaging before signing the freight carrier's delivery receipt.
If visible shipping damage is present:
- Take clear photographs of the CVT, pallet, and packaging.
- Clearly note the damage on the freight carrier's delivery receipt or BOL.
- Contact us immediately.
Concealed freight damage must be reported within 48 hours of delivery.
Keep all packaging, pallet materials, straps, wrapping, shipping labels, and freight paperwork until any applicable freight claim is completely resolved.
3-MONTH / 3,000-MILE LIMITED PARTS WARRANTY
This transmission includes a 3-month / 3,000-mile limited parts warranty, whichever occurs first.
The limited warranty applies to qualifying internal CVT failure resulting from a defect in the supplied remanufactured transmission assembly, subject to proper installation, correct CVT fluid, required programming, cooler servicing, and the exclusions listed below.
THE LIMITED WARRANTY DOES NOT COVER:
- Installation or removal labor
- Diagnostic charges
- Programming, coding, calibration, initialization, or relearn procedures
- Fluids, filters, seals, gaskets, or maintenance items
- CVT coolers or cooler lines
- Sensors, vehicle wiring, connectors, computers, modules, or external accessories
- Transfer case, rear differential, driveshaft, or AWD system components unless specifically included
- Towing or transportation expenses
- Rental vehicles
- Storage fees
- Lost income or lost profits
- Vehicle downtime
- Incidental or consequential expenses
- Failures caused by incorrect fluid, contamination, overheating, improper installation, external component failure, or failure to complete required programming procedures
$500 REFUNDABLE CORE DEPOSIT IMPORTANT: THE $500 CORE DEPOSIT IS NOT INCLUDED IN THE PURCHASE PRICE.
A separate $500 refundable core deposit is required in addition to the purchase price before the transmission can be shipped.
The $500 deposit will be refunded after your original qualifying transmission is returned to Sincere Gear and inspected.
The original transmission must be returned within 60 days to qualify for the applicable core refund.
To qualify for a full core refund:
- The correct original JF016E / RE0F10D AWD transmission must be returned
- The transmission must be substantially complete
- The core must be reasonably rebuildable
- The transmission case cannot be cracked, broken, or welded
- Major internal or external components cannot be missing
- The transmission cannot have been disassembled
- The unit cannot have catastrophic damage that prevents normal rebuilding
Unless otherwise agreed to in writing, the buyer is responsible for return transportation of the core.
Alternative core-return arrangements and core buyout options may be available on qualifying orders. Please contact Sincere Gear for current terms and eligibility.
EXTENDED LIMITED WARRANTY OPTIONS
Extended limited parts warranty options may be available for qualifying transmissions under a separate written warranty agreement from Sincere Gear LLC.
Please contact Sincere Gear for current coverage options, eligibility requirements, terms, and pricing.
OEM / INTERCHANGE REFERENCE
JATCO Transmission: JF016E
Nissan Designation: RE0F10D
Transmission Type: CVT8 Automatic Transaxle
Engine: 2.5L QR25DE 4-Cylinder
Drivetrain: AWD
OEM Reference: 31020-3VX1D
Related Stamp / Interchange: 3VX1D / 3VX9B
OEM and interchange numbers are provided as references only. VIN verification is required before shipment because production changes, transmission stamp codes, OEM supersessions, calibration differences, and vehicle configurations may vary.
LIMITED LIABILITY
To the maximum extent permitted by applicable law, Sincere Gear LLC's liability arising from the sale of the transmission is limited to the original purchase price of the supplied transmission.
Sincere Gear LLC is not responsible for costs associated with:
- Labor
- Installation or removal
- Diagnostics
- Programming, initialization, or calibration
- Towing
- Rental vehicles
- Storage
- Lost income or profits
- Vehicle downtime
- Incidental or consequential damages
NEED TO CONFIRM FITMENT? Send us your 17-digit VIN through messages. We would rather verify the application before shipment than have you receive the wrong CVT. Product Description: Professionally remanufactured JF016E / RE0F10D CVT transmission for applicable 2016, 2017, 2018, 2019, and 2020 Nissan Rogue 2.5L QR25DE AWD applications. OEM reference 31020-3VX1D. Nissan Rogue CVT8 automatic transaxle. VIN verification required before shipment and installation. Professional installation and applicable Nissan TCM programming, CVT initialization, calibration-data registration, fluid-level, and adaptive relearn procedures are required where applicable. SINCERE GEAR LLC
Remanufactured Drivetrain Components • Transmission Support • Nationwide Freight Shipping```
