PRODUCT DESCRIPTION
Brand New Black / Raw Anodized Hub Centric Wheel Adapters For Ford F-450 F-550 Ram 4500 5500 10x225 MM Bolt Pattern vehicles.
These Wheel Adapters Are Designed To Convert Your Bolt Pattern From A 10 Lug (10x225 MM) 19.5 Wheel To A 10 Lug Semi Wheel (10x285.75).
Allows You To Install Big Rig Semi 10 Lug Wheels On Your Truck, such as 22", 22.5", 24", 24.5", 26", 28", 30"
Hub Centric Adapters= Fits perfectly on your vehicle, without any vibration.
Machined Finish Using Forged Billet 6061 T6 Aerospace Aluminum.
Heavy Duty Construction, Up To 32,000lb Towing Capacity
Adapters Come With Pressed In Studs, And All Necessary Mounting Lug Nuts
Will Be Shipped In Multiple Packages Due To The Item Being Oversized
With Our Aluminum Adapters, You Do Not Have To Notch Your Wheels. We Recommend Filing Your Studs Just A Bit To Clear The Wheel Bore. Much Lighter Than Steel Adapters, And Twice As Strong If Comparing To a 0.75" Thick Steel Wheel Adapter.
BENEFITS
Allows You To install Big Rig Semi 10 Lug Wheels On Your Truck
Now You Can Adapt, American Force, Forgiato And Other Popular Dually Wheels To Get The Massive 10 Lug Look.
Safest Way To Use Wheel Adapters On 10x225 MM Vehicles
Hub Centric wheel adapters are the best adapters to use. Your wheels will sit on the hub lip, not on the studs like other regular adapters. This will prevent any vibration from occurring.
Improve Vehicle Stability
Wheel adapters widen your vehicle wheel base, increasing stability and resistance to side roll-over. Aggressive stance is also achieved.
Increase Clearance
Wheel adapters increase tire to frame clearance to allow installation of lift kits and or wider/larger wheel set up.
Hardened CR-Steel Studs
Heat-treated and hardened ISO/DIN 10.9 (SAE Grade 8) wheel bolts deliver strength and corrosion resistance.
INSTALLATION NOTES
Professional Installation Recommended
We recommend getting these adapters installed by a trained professional, but it is not necessary.
Make Sure You Get 5-7 Turns Before Tightening
Must be torqued down to factory specs.
No Gap In Between The Adapter And Hub
The back of the adapter must sit flush against the vehicles hub.
Full Set Of Lug nuts Included To Mount The Adapters
You will then use the extra lug nuts to mount you wheels on to the adapters. Please make sure your torque them down to factory specifications.
Vehicles Studs Cannot Pass The Face of The Adapter
If the studs do pass the face of the adapter, you will need to grind/cut them shorter. (This only applies to 1.5" adapters & smaller).
Please Make Sure You Take The Proper Measurements Before Purchasing
If you are not sure, you can always email us and we will point you out to the right direction. We will be more than happy to help and get your order correct the 1st time.
No Returns or Exchanges Once They Have Been Installed
