15 piece BLUE turbocharger, intercooler, and mass air hose and T-bolt clamp set.
Each set includes (5) nylon 4 layer reinforced silicone hoses. (2) 3\" I.D. (2) 2.5\" I.D. and (1) 2.0\" I.D. They are super thick with 5 mm of silicone and 4 layer nylon webbing. This kit can withstand operating temperatures from -65F to 500F. Working pressure of 100 psi and a burst rate of 250 psi.
These hose are cut at approximately 3.25\" to which is over 25% longer than the stock GM hoses (which were to short to begin with). They are 100% thicker with more durable material. Not many people know, but stock GM hose is only rated to 15-17 psi which is barely adequate for a stock car.
We are also include (10) matching high pressure T-bolt hose clamps. These clamps are twice as wide as stock and will never strip out when over tightening. They are made from stainless so they will always look new under the hood. Nice 10 MM socket head.
This kit is a must need for every stock or modified car. The problem is every turbo car has oil build up which passes through your turbo, intercooler, and throttle body. This creates a slippery residue under your hoses which will constantly pop off under normal or high boost. Your hoses are too short and your clamps strip before they get tight. If your clamps don\'t strip (which is rare), you hose will blow since it is the weakest link. This kit is your solution.
Free U.S.A. Shipping as always
