Steering • Brakes • Suspension Call the Experts
1982-1987 Chevrolet / GMC 6\' Short Bed Truck LS / Fuel InjectionGas Tank Conversion Kit with Fuel Pump and 90 Ohm Sending Unit
ALL GAS TANKS WILL BE DROPSHIP FROM VENDOR DIRECT AND ALL COMPONENTS SHIP DIRECTLY FROM CPP.
This \'82-\'87 squarebody GM fuel injection tank will work with both 2 and 4-wheel drive short bed trucks.
Fuel Tank Features:
- GM square body EFI Fuel Tank 16 Gallon
- Fuel Injection Ready!
- Fits \'82-\'87 Chevrolet truck C/K 10, 20, 30 series trucks
- Fits \'82-\'87 GMC truck C/K 15, 25, 35 series trucks
- With 1/4\" filler neck
- For \'6 long bed (tank is mounted ahead of rear axle)
- UsesourGPA series fuel pumps, available in 5 sizes
- Uses aftermarket 5-bolt senders, multiple Ohm ranges available to work with factory or aftermarket gauges
- EFI style internal baffling. Extra Large 4.8 literinternal fuel tray to prevent fuel pump starvation
- Perfect for your pro-touring, autocross or road racing ride
- Looks like an OE tank when installed
- Coated galvanized steel then powder coated silver
- 16 gallon capacity
- Dimensions: 42-7/8\" x 14-1/8\" x 11\"
Fuel Pump Features:
- Flow rate of up to 255 LPH
- Cut-to-Fit installation
- Supports up to 600HP
- All metal components are yellow zinc-plated
- 1/4\" NPT supply and return line size
- 40-100 PSI operating range
- Heavy gauge mounting plate
- Adjustable support arm
CPP LS Conversion Fuel Filter/ Regulator KitFeatures:
- 25 feet of high-pressure fuel injection hose
- (1) 3/8\" fuel filter feed line fitting
- (1) 5/16\" fuel filter/regulator return line fitting
- (2) 3/8\" female to -6AN male straight filter fittings
- (2) 1/4\" NPT to -6AN male fuel pump pickup and return line adapters
- (2) 45-degree -6AN female to 3/8\" hose fittings
- (6) straight -6AN male to 3/8\" hose fittings
- LS fuel filter/ 58psi Regulator
- 255LpH maximum fuel pump flow rate
CPP 90-ohm Fuel Tank Sending UnitFeatures:
- 0-90 ohm sending unit
- 6-24 volt DC operation
- Works with negative or positive ground electrical systems
- Fully adjustable, will fit 6\" to 24\" deep fuel tanks
- Includes (5) special O-ring screws and gasket
- Works with most aftermarket fuel gauges including VDO, AutoMeter, Classic Instruments, Omega, and Stewart Warner
This complete fuel injection gas tank conversion kit comes with everything you need to modernize your fuel system on your GM squarebody pickup and includes a brand new 16-gallon EFI fuel tank, EFI fuel pump kit with installation accessories including a complete fuel line kit and sending unit. The fuel line kit includes25-feet of properly rated fuel injection hose and all the correct fittings to plumb your fuel lines from the fuel pump forward along with a 58psi fuel pressure regulator/ filter that is perfect for anybody dropping an LS into their vehicle or who happen to be running an aftermarket fuel injection unit. All the fittings feature a reusable spin-lock connector that does not require specialty tools to disassemble. The sending unit isadjustable and will fit 6-24\" deep fuel tanks and will work with 6-24V electrical systems as well as negative or positive ground systems too. The FI fuel pump can support up to 600 horsepower and are quiet and reliable and a must for your fuel injected engine.
(Part# TM11B-T, FIIK255-90)
Warranty
All purchases come with a 30-day warranty from the day you receive your order. If you receive an item that is damaged or defective or missing components, please notify us within 3 days of receipt. Any items outside the 30-day warranty will be the responsibility of the customer to pay for any repairs, as well as cover all shipping costs.
Disclaimer Notice-Classic Performance Products
Classic Performance Products advises customers to exercisecaution when purchasing automotive components through third-party marketplacessuch as , Amazon, Temu and other under regulated platforms. These platformsdo not enforce consistent quality control standards, verify product safetycompliance, or require sellers to carry product liability insurance.
As a result, items listed often do not meet recognizedmanufacturing standards for proper fit, performance, or safe operation. Productlistings may also omit important details, including country of origin, and insome cases may be inaccurate or intentionally misleading.
Customers should be aware that low-cost imitation orcounterfeit parts?often manufactured without adherence to the automotiveindustry standards?are widely available. It is the buyer?s responsibility toverify that they are purchasing from a reputable seller who stands behind theirproducts and can provide support or accountability if issues arise.
At Classic Performance Products we uphold industry leadingautomotive manufacturing standards. As a trusted and established manufacturer,our components are engineered, tested, and manufactured to meet or exceedindustry standards for quality, fitment, and safety. Our team brings decades ofhands-on expertise in performance automotive industry, and we stand behindevery product we offer. From design and production to customer support, we arecommitted to delivering reliable solutions and responsive service you candepend on.
For safety, performance, and peace of mind, choose asupplier with proven experience, verified quality, and the accountability tosupport you long after the sale.
