Car Audio & VideoPro AudioMarine AudioLightingKaraokeHome/Portable Audio
Package Includes: (1) Rockville RXD-T2 2400 Watt Peak 2 Channel Micro Class D Water Resistant Car Amplifier (2 x 600 Watts RMS Dyno-Certified)+ (1) Rockville RWK41 4 Gauge Complete Car Amp Wire Kit w/RCA\'s
Click Thumbnails to EnlargeCondition and Warranty
Condition: BRAND NEW IN ORIGINAL PACKAGING
Warranty: 1 YEAR AUDIOSAVINGS
Product Description
Package Includes:
- (1) Rockville RXD-T2 2400 Watt Peak 2 Channel Micro Class D Water Resistant Car Amplifier (2 x 600 Watts RMS Dyno-Certified)
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wire Kit w/RCA\'s
Video of RWK41:
Unboxing Video for RWK41:
AuthorizedRockville Dealer!
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. BetterResistance: The only thing that really matters with wires is the resistancerating. This is a measurement of conductivity and how much signal is loss perfoot of wire. Since Rockville wiresare made with around 3 times as much copper as any other wire at this pricepoint, these wires had a much better resistance rating which means they willtransfer more power to your amps than the other brands.
3.We do not cheat you on the thickness of the wire. These are standardAmerican wire gauge thickness. This is another reason our conductivityis better than anything else at this price point. Other brands in themarket place write 4 gauge, but cheat you on the thickness. We arehonest about the thickness.
4.TheRockvilleamplifier installation kits feature a new soft abrasionproof insulating jacket. This rugged PVC outer jacket allows for 100%improved flexibility over standard power cables making them extremelyeasy to route through your vehicles interior, and it maintainsexceptional resistance to grease and oil. The PVC outer jacket canwith-stand an extreme temperature range of -40 to 220 degrees F.
TheRCA signal transfer cables included in this kit feature blue and silvertwisted pair technology in a clear outer jacket insulation skin. Notonly do the blue and silver wires look cool but they also providesuperior signal transfer with maximum noise suppression. They are 100%copper to provide absolute lossless perfect signal transfer to yourreceiver. This technology reduces interference, so your audio signalflows clean and pure at all power levels.
Thiskit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can besure it will handle the all the DC power that your amp will need withouteven the slightest loss of current. The included 7 split loom tubeprovides protection for your power cable from the typically harshenvironment found under the hood of your car.
Audiosavingsproduct experts have tested this amp kit against many leading amp kitson the market and were were impressed not only by the great looks but bythe quality of these Rockville installation kits as well. These kitshad a lower resistance rating than the other brands we compared andtested them against. What this means is that Rockville manufacturestheir kits with more copper than other kits at this price point,ultimately providing your amplifiers with better and cleaner DC power,so they work cooler and more efficiently. You will hear the difference aRockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Description of RXD-T2:
The RXD-T2 is part of the Rockville proton series. The RXD-T2 is a 2 channel Amplifier with 2400 watts peak output and 2x600 wattsDyno Certified RMS Power.Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market.The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
Warning: This amplifier produces insane power! We do not want you to blow your speakers. Do not under-estimate this amplifiers\' capability! After purchasing this amplifier; install with the gain level down all the way and then crank it up very slowly to protect your speakers or subwoofers from blowing.
The RXD-T2 is rated at 1200w RMS Dyno Certified! This amp performs at 600 x 2 @ 2 ohms RMS and when you bridge it you get 1200 x 1 @ 4 ohms! This is a full range class \"D\" amplifier. It is super super efficient.
We will offer a 90 day money back guarantee. If you are not happy with the output power or sound quality, we will call tag the amp back and refund all of your money!
One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXD-T2 has (3) 35 Amp fuses. This amplifier will also go louder than most amps with this same fuse rating due to how efficiently it runs.
There is really no amplifier on the market that sounds this good and has this much output power at this price point.
Features:
- Rockville RXD-T2 2400 Watt Peak 2 Channel Micro Class D Water Resistant Car Amplifier (2 x 600 Watts RMS Dyno-Certified )
- Full-Range Class D Amplifier Architecture
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
- 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
- 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
- Fully marine grade amplifier
- Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more
- Double Sided Surface Mount (SMD) PCB Design
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- 2-Ohm Stable Stereo
- 4-Ohm Mono Bridgeable
- Mute and Delay Soft Start System
- Full IC-Controlled Protection Circuitry
- RCA Preamp Line Output
- Status Mode LED Indicator
- 8 Volt Preamp Circuitry
- 4 Gauge Lucite Encapsulated Power/Ground Terminals
- 12 Gauge Lucite Encapsulated Speaker Terminals
- Fully Adjustable 12dB / Octave Crossover
- Low Pass 50Hz - 250Hz
- High Pass 50Hz - 250Hz
- Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
- Minimum THD at Rated Power: < 0.05%
- Frequency Response: 15Hz - 20KHz
- S / N Ratio: 100dB
- S/N Ratio: >97dB
- Damping Factor: > 200 @ 100Hz
- 3 x 35 Amp Fuses
- Dimensions: (W x H x L) 6.7\" x 1.98\" x 12.25\"
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it. Return PolicyAudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
- We will send you a pre-paid shipping label to replace the item for a brand new one.
- We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
- If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You MUST notify us within 48 hours if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.
Item Code: RXD-T2+RWK41
Home / About Us / Contact Us / Returns / FAQ\'sCopyright © 2016 Audio Savings, All rights reserved. | Template Design
