Humanized Design
Ensure a tight seal and smooth steering operation. The hydraulic lines are fully fluid tested at high pressure. And the steel clamps and rubber bellow boots improve steering Include
1PCPower Steering Rack and Correctly select the model and size of the steering gear: The model and size of the steering gear must be consistent with the original parts of the vehicle, otherwise it will affect the steering sensitivity and stability;
2. Clean the surrounding area first: Before replacing the steering gear, it is necessary to thoroughly clean the surrounding area to prevent small debris residues from damaging new steering gear components;
3. Correct disassembly and assembly of the steering gear: When disassembling an old steering gear, be particularly careful to avoid damaging the original vehicle components, and lubricate the bearings and gears during installation;
4. Use of high-quality steering oil: For hydraulic power assisted steering machines, high-quality steering oil is required;
5. Correctly adjust the wheel angle: After replacing the steering gear, it is necessary to adjust the wheel angle to ensure vehicle stability and safety;
6. Attention to maintenance: Regularly inspect and maintain steering gear components to ensure good operation of the steering gear.
Note
Oil leakage: The oil seal in the steering gear can break due to aging and wear, resulting in loss or leakage of hydraulic oil. Oil leakage can cause difficulty or malfunction in steering operation.
Abnormal noise: A snap, noise, or hiss may be caused by worn steering gear, pin shaft, or rack.
Excessive steering force: Blockage or wear of the steering gear oil pipes or passages can cause excessive hydraulic oil pressure, excessive steering force, or even steering failure.
Steering failure: Steering failure can be caused by reasons such as damage to the steering gear, blockage in the oil circuit, and failure of the oil pump, which will affect driving safety.
Shake or shake: Worn or loose parts in the steering gear can easily cause the vehicle to shake or shake during steering.
Dead center: When turning, if the steering wheel needs to be rotated for a long time until the vehicle turns significantly, this may be a dead center problem with the steering gear.
About UsWe have a highly experienced engineering and technical team who specialize in researching and developing all our products.
PaymentWe accept -managed payments for all orders. Payment should be made within 3 days after purchasing. If you have any questions, please contact us. To accelerate the shipping process a bit, please clear your payment after sale closure or placing the order.
ShippingWe are committed to providing customers with efficient, convenient, and fast services. Goods from local warehouses in the United States are generally shipped within one to two days,
and goods from warehouses in Guangdong, China are generally shipped within five to seven days.
(1). Item location: Guangdong, China
Item will be shipped out within 5-7 Days upon receipt of your payment. We ship the item through the SpeedPAK / Expedited Shipping logistics channel.
Please make sure your address on is correct. If you want to change the address, please give us an message right away after you make the payment.
(2). Item location: California, United States
Item will be shipped out within 24-48 hours upon receipt of your payment.
Orders from the USA will all be shipped out via Carrier UPS OR USPS. Usually, it takes up to 3 business days for delivery.
When you find track information is abnormal or do not get goods in 10 days, please feel free to email contact us first for troubleshooting, Don't open a dispute case immediately Please.
Please make sure your address on is correct. If you want to change the address, please give us an message right away after you make the payment.
ReturnsIf you are not completely satisfied with your purchase, you must advise us via message within 14 days of receipt of your order - please do not return any goods before contacting us.
We will reply to your email within 24-48 hours during opening hours (Mon-Fri 9 am-6 pm GMT+8) to advise you on the returns process and address.
All returned items must be complete, in the original packaging, and in an unused re-saleable condition.
A full refund of the order total will be made using the original payment method. Please be advised that you will be responsible for the cost of the return postage.
Contact UsPlease read the item description and see if the item fits your vehicle exactly. If you have any questions, feel free to email us by message, and we will try our best to replyto yourquestion within 24-48 hours. Please understand that we are closed during weekends or holidays, so there might bea littledelay during weekends or holidays, We will try our best to replyto allemails in the next business day.
Office Hours are Monday - Friday: 9:00 AM - 5:00 PM (GMT+8),Saturday, Sunday, and Holiday: Closed
Communication is very very important for us to do business online. We maintain high standards ofexcellence and strivefor 100% customer satisfaction! Bad response is not communication, any case on and PayPal resolution center is not communication. We'll do our best to solve any problem with the order, but maybe the sellerdoes havenot so much enthusiasm to solve the problem after a case or bad response, Your understanding is greatly appreciated!!Copyright © 2022 TongtoolOn Jan 13, 2024 at 17:21:13 PST, seller added the following information: