Visit our Store Fitment Shipping Return Contact UsInjen EVO1801 Cold Air Intake for 08-14 Mitsubishi Lancer Evolution X 2.0L Turbo Injen EVO1801 Cold Air Intake for 08-14 Mitsubishi Lancer Evolution X 2.0L Turbo
Give your Mitsubishi Lancer Evolution X that added punch you crave with the EVO1801 Evolution Cold Air Intake System by Injen Technology. The EVO1801 is specifically engineered for the 2008-2015 Mitsubishi Lancer Evolution X with the 2.0L turbo engine. Every EVO1801 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!
The EVO1801 intake tube was precisely tested and tuned on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The Mitsubishi Lancer Evolution X ECU is very sensitive to modifications and will not accept most aftermarket intake kits without the use of an additional and costly tuner. This is not the case with the Injen Evolution cold air intake. Our intake tube incorporates our patented our patented MR technology to provide safe and reliable fuel trim levels, all without the use of an aftermarket tuner!
The EVO1801 Cold Air Intake system features our 2-piece box design that incorporates our boost plenum, our fully integrated ram air scoop, and a massive 360 degree SuperNano-Web dry air filter. Every Injen Evolution air induction system utilizes Injen’s proprietary SuperNano-Web dry air filters. Don’t just take our word for it, every intake system that Injen Technology produces is dyno tested in-house and those results are published for anyone to see.
Roto-molded Housing and Ram Air Scoop:
The EVO1801 system features our 2-piece box design that incorporates our boost plenum. The box is molded into our fully functional ram air scoop to capture the maximum amount of cool air to feed that hungry turbo.
Roto-molded Intake Tube:
The EVO1801 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights.
SuperNano-Web Dry Air Filter:
“That’s massive!” is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1801 cold air intake system. Using the largest filter possible for this application has increased the available air volume – resulting in added power while keeping the installation process quick and simple.
Quality Hardware:
From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit.
Hassle-Free Installation:
Make it easy! By designing this kit in a 3D workspace, you’re ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood.
Dyno Proven:
Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Mitsubishi Lancer. After hours of designing and dyno testing, Injen is proud to say that the EVO1801 Evolution Air Intake system puts down numbers of up to 35 additional horsepower and 30 Ft.-lbs. of torque.
Key Features
- Direct Fit for
2008-2015 Mitsubishi Lancer Evolution X L4-2.0L Turbo - Dyno Proven gains of up to 35 hp and 30 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded Polyethylene housing and scoop
- Intake scoop is designed to capture the largest amount of cool air
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1128-BB
- Stainless steel band clamps with inner protective liner
- Aggressive under hood appearance while maintaining an OE fit
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
- Optional Rain Guard sold separately – P/N: EVO1800RG
Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fits these Vehicles:
2008-2014 Mitsubishi Lancer Evolution X L4-2.0L Turbo
* Photos are representations of product. May vary between actual products.
Fitment
Buyer is responsible for verifying product fitment prior to ordering. If you need help verifying product fitment please contact us so that we can help you. We are always here to assist and answer any Disclaimer:
We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information. Item ships within one business day after the payment has cleared or the same day. We ship with FedEx/UPS/USPS ground service unless instructed to do differently. We also may have an option of expedited shipping at an extra cost. Shipping charges are non-refundable.
Free Shipping Disclaimer:
For listings with free shipping, it only applies within the continental 48 states. Shipments to Alaska, Hawaii, Puerto Rico, or any of the U.S. territories may incur an additional shipping charge. Outbound shipping charges are non-refundable and will be deducted from returns. Please contact us for additional information prior to placing your order.
International Buyers - Please Note:
Import duties, taxes, and fees aren\'t included in the item\'s price or shipping costs. The buyer is responsible for paying any import fees. Check with your country\'s customs office to find out what these additional charges will be before you offer or buy. The international shipping rate applies to addresses in all other locations.
Return
Please contact us BEFORE initiating a return so we can try to resolve any problems in the easiest possible way.
Returns are not accepted on international orders.
- Absolutely NO returns or exchanges are allowed on products that have been used, installed, mounted, or missing components.
- Returned new items must be in the original packaging (including plastic wrapped items), uninstalled, and in factory brand new condition.
- Make sure a return authorization (RMA #) is clearly displayed on the shipping label or package to speed up the return process
- All carrier-related damage or loss claims must be made with the carrier within 48 hours of item receipt
Terms of Sale
We reserve the right to cancel or refuse any order at any time without notice. Availability is subject to change at any time. We sell on multiple channels therefore orders will be filled on a first-come, first-serve basis. We will contact you immediately if there is an oversell situation. Some situations that may result in the cancellation of the order include limitations on quantities available for purchase, inaccuracies, errors in product or pricing information, or problems that are identified by our Credit and Fraud Prevention Department. In some cases, we must contact you to obtain and verify additional information before accepting any order. If your order is canceled for any reason or additional information is required, we may contact you by phone and/or email. Please be sure that you verify your contact information on the order as it must be valid to be accepted. If the contact information is fictitious or invalid we reserve the right to cancel an order. For any additional information please contact us.
