High Gas Consumption Decal Funny Fuel Gage Sticker For Sale - New and Used

***MADE IN USA***

If no color is chosen,White will be sent. If you have any problems with your order please message me. I will make sure to resolve your problem in a timelymanner.

All stickers come ready to install with application tape and Instructions to apply !!

A basic simple method for installing the vinyl decals...

Upon receiving your decal in the mail - unroll and layout flat. Lightly squeegee out any wrinkles caused by the shipping process.

1. Gather simple supplies. For this method you\'ll need tape, rubbing alcohol, scissors, napkins, and a squeegeeor credit card. Clean the surface well with rubbing alcohol.

2. Tape Decal to surface as shown using three pieces of tape as shown. Masking tape works well. Make sure you tape it exactlywhere you want it because that\'s where it will end up.

3. Peel back side without tape and cut wax paper underneath. You might want a friend to help hold the stick part so it don\'t fall back on the glass.

4. With the wax paper cut off on one side, get ready to apply half of the decal. Preferably using a squeegee or credit card applying from the center outwards to reduce air bubbles.

5. Apply the one side from center outwards.

6. Remove the three pieces of tape now. Lift the other side.

7. Peel off wax paper backing from where you cut with the scissorsand hold the rest of the decal up and get ready to apply like you did the other side.

8. Squeegee the other side on as you did the first side. From the center out to reduce air bubbles.

9. Once the whole decal is applied, very slowly remove the top layer of application tape at a sharp angle from the sticker.

10 . Da Da!! Don\'t That Look Great!

1)Give decal a firm squeegee first. this
enables easy separation from wax
paper. Peel extra slow when decal is
cold.

2)SLIGHTLY heating with a blow dryer
may help is your having difficulty
separating the decal from wax paper.

3)Always clean glass VERY thoroughly with
rubbing alcohol only. NOT WINDEX!

4)Do not apply in temperatures below
50 degrees Fahrenheit. This has to do
with vinyl’s initial adhesion property.

5)Do not let snow stay on decal for
extended periods if possible. Gently
wipe away if you can.

6)In extreme cold weather put vehicle
inside if possible.

7)Don’t pour hot or warm water on
frozen decal. Don’t tamper with decal
when it’s frozen.

ll orders are shipped first class by mail.(WITHOUT TRACKING)

If you place an order for a sticker bigger than 12 inches it will be shipped with tracking.

(Optional)Paid USPS First Class Package shipping with Tracking is available.

Returns are accepted within 30 days if your product is defective and or not used. Vinyl orders are made to order and unless there is a defect there is no returns.