4Pc 25mm+30mm Wheel Adaptor Spacers for BMW X5 E70 E53 F15 xDrive 30i 35i 50d For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

4Pc 25mm+30mm Wheel Adaptor Spacers for BMW X5 E70 E53 F15 xDrive 30i 35i 50d:
$219.92

STORE HOME
ALL LISTINGS
ABOUT US
CONTACT US
ADD TO FAVS
response

STORE CATEGORIES

Wheel Spacers

For ACURA
For AUDI
For BMW
For CHEVROLET
For DODGE
For FORD
For HYUNDAI
For INFINITI
For JEEP
For LAND ROVER
For LEXUS
For MAZDA
For MERCEDES-BENZ
For MINI
For MITSUBISHI
For NISSAN
For PORSCHE
For SAAB
For SCION
For SUBARU
For SUZUKI
For Tesla Referral
For TOYOTA
For VOLKSWAGEN
For VOLVO

Wheel Adapters
Wheel Hanger
Hub Centric Rings
Titanium Wheel Lug Bolts
Aluminum Wheel Lug Bolts
Aluminum Wheel Lug Nuts
Other

RECOMMANDED 2Pcs 40mm High Safe Wheel Spacer fit Mercedes M Class,ML350,ML500,R350,R500,R170$139.55 BUY IT NOW 2X 50mm Wide High-tec Wheel Spacer fit Subaru Forester,Impreza,BRZ,Scion FRS$128.99 BUY IT NOW (2) 10mm Forged Lightweight Hubcentric Wheel Spacers for Porsche 911 Panamera$121.99 BUY IT NOW Set of Toyota Throttle Body Spacer fit Mark X II 2.5i V6 2004-2017 Torque Power$89.99 BUY IT NOW 2pcs 15mm Anodized 5x114.3 Wheel Spacer for Infiniti G25,G37,G35,Sedan,Coupe$109.99 BUY IT NOWITEM DESCRIPTIONWHEEL SPACER SPECIFICATIONS

Quantity

2Pc 25mm + 2Pc 30mm

Torque Specs

140NM / 113NM

Vehicle Bolt Pattern(PCD)

5x120MM

Hub Centric

Yes

Wheel Bolt Pattern(PCD)

5x120MM

Material

Forge Alloy 6061-T6 Aluminum

Wheel Spacer Thickness

Front 25mm + Rear 30mm

Minimum Number of turns for Bolts/Nuts

7.5 Turns / 6.5 Turns

Hub Bore (CB)

72.56 MM / 74.1 MM

Fit Models

BMW X5 X6 X5M X6M

Thread Pitch

14x1.25 / 12mm*1.5

Color Choice

Black Anodized

Bolts Grade

12.9 Grade Tested

Brand

BLOXSPORT

All Orders will ship USA/CA/MX/Europe/AU/NZ/Asia etc. Estimated time of arrival 4-9 days.

High-Strength Aircraft Aluminum Alloy 6061-T6, Forged Material.
Brand Wheel Spacers, Real Material, Laser Material Number and Logo on Spacers/Adapters.
Hard Anodized for durability and corrosion protection.
Precision Engineered Hub-Centric and Model Specific for Perfect Fit and Wheel Balance.
Limited Life Range Tested for Wheel Bolts/Stud (1 Million Times) in accordance to ISO3800.
Strength-Tested for Applications (Bolt/Stud/Nut) in accordance to ISO898-1,ISO898-6,SAE J429,SAE J995.
Anti-Rust Tested (NSS 72 Hours) for Applications (Bolt/Stud/Nut) in accordance to ISO9227.

Item Compatible vehicles:
1995-2003 - BMW - E39 (Hub Front 74.1/Rear 74.1)
2000-2007 - BMW - X5 E53 (Hub Front 72.56/Rear 72.56)
2007-2013 - BMW - X5 E70 (Hub Front 74.1/Rear 74.1)
2013-2018 - BMW - X5 F15 (Hub Front 74.1/Rear 74.1)
2009-2013 - BMW - X5 M E70 (Hub Front 74.1/Rear 72.56)
2013-2019 - BMW - X5 M F15 (Hub Front 74.1/Rear 72.56)
2015-2019 - BMW - X5 M F85 (Hub Front 74.1/Rear 74.1)
2008-2014 - BMW - X6 E71 (Hub Front 74.1/Rear 72.56)
2014-2019 - BMW - X6 F16 (Hub Front 74.1/Rear 74.1)
2009-2014 - BMW - X6 M E71 (Hub Front 74.1/Rear 72.56)
2014-2019 - BMW - X6 M F86 (Hub Front 74.1/Rear 74.1)

8 Main Advantages

Hub Centric Design-- NO VIBRATION

(1). Hubcentric Wheel Spacer: The locating ring fits into the space on the wheel exactly as the hub\'s locating ring would. This means that the weight of the car is still resting on the hub rather than the wheel studs, meaning the vehicle is set up just like it came from the factory, meaning no vibrations from the wheels, and also protect the studs. (2). Non-hubcentric Wheel Spacer: The weight of the car is no longer on the locating ring and is now on the studs, it more easily cause vibrations from the wheels, and studs bear all weight of the car. (3). BLOXSPORT team design different hub centric(Wheel-centric lip) for different car models. Making the car at high speed, speed cross-country more secure and stable. To ensure car no vibration or shaking.

SAFETY--Forged Aluminum Alloy Material

(1). As the picture show you, The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety.(2). But BLOXSPORT insist on using the FORGED material, insist on the conception of putting safety in the first place and reject to use the casting material. We made laser material number(Forged Aluminum Alloy 6061-T6 or 7075-T6) and brand logo on spacers. Refuse \"Three-None\".

Bolts/Studs/Lug Nuts

Bolt/Stud affects the safety performance directly, so they are very important accessories. The good product
is always along with the test report and can bear series of test. The world is moving forward and we are improving

BLOXSPORRT had upgraded the studs/lug nuts:

(1). Studs/Lug nuts: surface treatment is from chroming to dacromet, becoming more anti-rust(10 Years);
(2). Studs: material is from SCM435 Alloy steel to SCM440 alloy steel, so the grade level is from 10.9
grade(vehicleoriginal level) to 12.9 grade(rally racing level).

Grade Tested Reports

Sample of wheel studs 12.9 grade has been tested according to Test method: ISO898-1:2013, Cor.1:2013, on 08 December 2015, report No. GZIN1512051950ML. Report is available on request and can be validated.

Machining Precision -- CNC Machined

Professional Data Measurement: The consummate data comes from constant practice, BLOXSPORT
always make perfection more perfect. CNC Machined: The wheel spacers were modern CNC machined, Accurate to 0.02mm Machining precision. The surface was more smooth, increasing car driving more stable and more secure and no vibration.

Black Hard Anodized Finish

@ Black color hard anodized is more beautiful and luxuious, anti-rust.

How Thick Should your car fit?

Before you buy, please confirm that this is the thickness you need. If you not sure which thickness you can
install for your car, please use the measuring device to measure from the inside of the straight edge to the
inner fender lip as below showing.

Item Benefits:

Remove gad by spacing wheel and tire out to fit with fender after handing
Increased performance in wheel drive conditions, improved appearance.
Improve brake caliper clearance, BLOXSPORT spacer adds more clearan between brake caliper and wheel.
Add inner fender clearance, add clearance between tire/wheel and inner fender.
Add clearance between suspension and tire/wheel.

Product effect:

Increase the car wheel track, reduce the body center of gravity, reducing the body deformation.
To improve vehicle stability and improve handing and other functions.
To ensure that the car is more flexible, smooth and safe.
To be able to make the sability of the vehicle greatly ascend.

Packing with hard boxes and froth bag, all-round protection for products,
you will get a better experience.

Installation Remind

Installation should only be performed by a trained professional.
Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.
Please take the necessary measurements to ensure proper fitment. we only guarentee that you will receive the spacers that is described, we do not guarentee any fitment onto any vehicle.
Please insure that the bolt patterns and thread patterns of your vehicle match the specifications above. That will insure a smooth installation.
If the studs are longer than the Adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your exsisting lugs if you choose not to purchase shorter studs.
If you have any questions reguarding how to properly measure your bolt pattern, please contact us via , and we can give you detailed instructions.

Factory Shows

We are the manufacturer, welcome to contact us for OEM customized service.

Safety guidelines(Minimum number of turns for wheel bolts/nuts)

M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12 mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2\"-20UNF = 8.0 turns = approx. 11 mm of load bearing shaft length

How much standard torque force of different lug bolts or nuts is?

M12: 113NM(83.3Ft-tb); M14: 140NM(103.5Ft-tb); 1/2-20: 130NM(95.8Ft-tb)
PAYMENTSHIPPINGRETURNSresponseABOUT USPAYMENT We only accept paypal. (Accept credit card payment through PayPal)Payment must be received within 5 days after sales ended. If you do not have Paypal account, please registered with(HTTPS://www.paypal.com). SHIPPING--We are not responsible for custom duty or import tax.
--All Orders that Payment is received before 5pm Beijing Time M-F will be shipped the same day, if received after that time, they will be shipped the next business day, Saturday and Sunday orders will be processed and Shipped on Monday.
--All orders are shipped by DHL/FedEx/UPS within the continental United States. Other international Shipping is available. You need to contact us confirming express method and accounting shipping costs.
--Your purchase will be shipped via standard airmail, which normally takes 3-10 working days to arrive.
--We will provide you with tracking numbers when the item is shipped out.RETURNS14 days money back, buyer pays return shipping.
responseMore and more customers believe in BLOXSPORT\'s profession, so choose us.ABOUT US

BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1\" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed 1 Million times Fatigue Test,etc.).We always insist on four concept respectively:

1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product\'s stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer\'s hand (not only the best quality but also there\'s no scratch on our products which has been sent to our customers).