Pls contact us first before you want to return it,thank you!Attention:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately)9007/9004/HB5(Headlight High/Low Beam)
Waterproof: Well sealed, high waterproof rating, IP 67
Power: 80W/set (40W/bulb)
Luminous Flux: 8000lm/set (4000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K-6500K
IP67 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50,000hrs lifetime
Usage: headlightFeatures:
Using CSP Led Chips and Special design,provide better light type,shape in a line and spotlight.
Using High Quality Led chip ( CSP chips), High luminous efficiency.
CSP Chips, high quality and long life-time
Solid metal clip, 360 degree rotatable to adjust the beam.
External adapter for longer service life.
All-in-one aluminum material and design makes it easy to install.
Cooling System With Powerful turbo fan with 12,000 RPM,fast cooling,Keep super long time lighting.
All-in-one aluminum profile as heat conduction system, 360 degree heat radiating,High speed mute fan (12000R/Min),high Air flow for faster cooling rateTwo-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan (12000R/Min),high Air flow for faster cooling ratePackage Included:
2pcs 9007 LED Headlight
Packing new and old for delivery randomlyInstall Caution：
1.As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2.Put the vehicle into park or make sure it is securely in gear.
3.Be sure to turn off the ignition and remove the key.
4.Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5.Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7.Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Notice: Our warranty will NOT cover installation service, labor cost, diagnostics or any other expense related to item being defective/damaged.WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
