Bolt Bolt Pattern:5x4.5''4.Thread Size:1/2x205.Center Bore:70.5mm6.Quantity:(4) Spacers should I pay attention to during installation?1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.3) DO NOT proceed if both of the wheel spacer do not fit. 2''thick 5x114.3mm Wheel Spacers 1/2x20-70.5 fits Ford Fairlane 1955-1967 4x
Bolt Pattern:5x4.5''
3.Wheel Bolt Pattern:5x4.5''
4.Thread Size:1/2x20
5.Center Bore:70.5mm
6.Quantity:(4) Spacers should I pay attention to during installation?
1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.
2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.
3) DO NOT proceed if both of the wheel spacer do not fit.
4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.
5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).
6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.
8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
How to measure the fender gap to choose suitable thickness?
1) Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
2) Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer
thickness= the smallest gap - 3/8"(10mm)
Item Specificscondition newManufacturer Warranty 5 Yearsquantity 4pcsColor silverVehicle Bolt Pattern 5x4.5Wheel Bolt Pattern 5x4.5Thread Pitch 1/2" x 20Hub Bore 70.5mmthickness 2''
Payment
We acceptPayPalonly.
Shipping
1.All items will be shipped to buyer's address,we don't take charge for wrong address left.
2.All items will be shipped outwithin3businessdays with cleared payment. Please include yourphone number in the payment note for prompt and secure shipment.
3.Tracking numbers for all orders are added to once they have been dispatched; please log in to to findthe tracking information for your order.
Returns
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your ID.
3.Return shipping is to be paid by the Seller.
4.We act as a responsible seller; we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
Contact Us
It's highly appreciated you leave uspositive responseand 5 star rating comments if you are satisfied with our service!
Your comment is very important in our business success.
Please feel free to contact us first before leave indifferent response or 1-3 star good response and open Case. we will try our best to solve your problem.Because we believe Anything can be resolved through communication.Thank you!
response
Your comment is very important in our business success.
Please feel free to contact us first before leave indifferent response or 1-3 star good response and open Case. we will try our best to solve your problem.Because we believe Anything can be resolved through communication.Thank you!
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home KYX-Wheel Spacers KAC-Catalytic Converter Shock Absorber Air Heater Intercooler Cold Air Intake Kit Turbo charger Cylinder Piston Gasket Kit Bumper Grilles Air Filter Leveling Lift Kit spark plugs Control Arm Car Accessories Running Boards & Step Bars Headlight assembly OtherHot Item Front Complete Strut Spring Assembly fits DODGE JOURNEY 09-19 172509/172510 2x USD 133.63 8PC Front Lower Control Arm Sway Bar Control Arms for Dodge Caliber Jeep Compass USD 47.66 2pcs Black Wheel Spacers 2" 8x6.5" M14x1.5 130mm for Chevrolet/GMC Savana USD 67.44 4''Cold Air Intake Kit Aluminum for 99-2003 Ford F350 Super Duty 7.3L V8 USD 44.26 2pc Front Complete Struts&Coil Springs fits Dodge Journey V6 09-19 172509/172510 USD 132.57 Excellent Delivery
Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout UsNew List Item Front Pair Complete Shock Absorber Strut fits 2007-2011 2012 Nissan Sentra 2.0L USD 118.82 1"thick /5x4.5 to 5x4.75 wheel spacers 12x1.5-74mm hub bore fits Jeep Toyota 4pc USD 67.44 4pcs 15mm & 20mm 5X120mm to 5x120mm Wheel Spacers 12x1.5 thread-72.56mm USD 56.99 Headlight Assembly fits 1999-2001 2002 Chevrolet Silverado 1500 AMCH USD 60.75 Fog Lights assembly for For 2007-2013 Chevrolet Avalanche 2008 2009 2010 USD 35.00 2''thick 5x114.3mm Wheel Spacers 1/2x20-70.5 fits Ford Fairlane 1955-1967 4x
Bolt Pattern:5x4.5''
3.Wheel Bolt Pattern:5x4.5''
4.Thread Size:1/2x20
5.Center Bore:70.5mm
6.Quantity:(4) Spacers should I pay attention to during installation?
1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.
2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.
3) DO NOT proceed if both of the wheel spacer do not fit.
4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.
5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).
6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.
8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
How to measure the fender gap to choose suitable thickness?
1) Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
2) Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer
thickness= the smallest gap - 3/8"(10mm)
Item Specificscondition :newManufacturer Warranty :5 Yearsquantity :4pcsColor :silverVehicle Bolt Pattern :5x4.5Wheel Bolt Pattern :5x4.5Thread Pitch :1/2" x 20Hub Bore :70.5mmthickness :2''
PaymentShippingReturnsContact Usresponse
We acceptPayPalonly.
1.All items will be shipped to buyer's address,we don't take charge for wrong address left.
2.All items will be shipped outwithin3businessdays with cleared payment. Please include yourphone number in the payment note for prompt and secure shipment.
3.Tracking numbers for all orders are added to once they have been dispatched; please log in to to findthe tracking information for your order.
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your ID.
3.Return shipping is to be paid by the Seller.
4.We act as a responsible seller; we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
It's highly appreciated you leave uspositive responseand 5 star rating comments if you are satisfied with our service!
Your comment is very important in our business success.
Please feel free to contact us first before leave indifferent response or 1-3 star good response and open Case. we will try our best to solve your problem.Because we believe Anything can be resolved through communication.Thank you!
Your comment is very important in our business success.
Please feel free to contact us first before leave indifferent response or 1-3 star good response and open Case. we will try our best to solve your problem.Because we believe Anything can be resolved through communication.Thank you!
All rights reserved.