Description:Rubber Sealant is a black, non-drying, non-hardening synthetic rubber based butyl rubber sealant suitable for use as a placement sealant tape for re-sealing headlights after a retrofit or for installation between the glass and metal/llastic areas of automotive headlights/windscreen. It will remain permanently sealing and Maretial: Synthetic Butyl Rubber Color: Balck Length: Approx. 4m 13ft. (enough for re-sealing about two - four headlight assemblies.) Thickness: Approx. 9mm Qiaoxie
Best choice of motor parts
1 Roll 4M Car Butyl Tape Rubber Glue Headlight Sealant Retrofit Reseal Door 13ft Description:
Rubber Sealant is a black, non-drying, non-hardening synthetic rubber based butyl rubber sealant suitable for use as a placement sealant tape for re-sealing headlights after a retrofit or for installation between the glass and metal/llastic areas of automotive headlights/windscreen. It will remain permanently sealing and
Maretial: Synthetic Butyl Rubber Color: Balck Length: Approx. 4m 13ft. (enough for re-sealing about two - four headlight assemblies.) Thickness: Approx. 9mm After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean, free from dust, oil and grease. Release the sealant from the release paper and pressit sufficiently around the pinch weld for a complete contact. When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the other coupling part. The purpose of the sealer is to provide for a watertight seal. In cold weather conditions it is best to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.Wide Range of Application:
(1) Butyl tape can be stuck on any type of metal, concrete, glass, plastic and porous surface without fear of falling off.
(2) sealing or resealing car headlights, windshield, headlamp, air
1 Pcs x 13ft. Black Butyl Rubber Headlight SealantNote:
1.Please kindly undertsand that slight color difference may exsit due to phtotgraphing condition.Thank you for your understanding!
2.If you have any questions or concerns, please contact us using the messaging system.Thanks！
Item SpecificsBrand MODIGTType Car Black Butyl Rubber Glue SealantNumber of Pieces 1Color BlackPlacement on Vehicle Left, Right, Front, RearFeatures Sealing / Reduce Noise / Waterproof / Heat ResistantManufacturer Part Number A Placement Sealant Tape For Re-sealing HeadlightFeatures 1 Sealing / Reduce Noise / Waterproof / Heat ResistantMaterial Synthetic Butyl RubberLength (ft.) Approx. 4m 13ft.Thickness Approx. 9mm 0.35''Package include 1 Pcs x 13ft. Black Butyl Rubber Headlight SealantUniversal Fitment Yes
Payment
1. It will be much appreciated that you finish your payment asap or it will make UPI (unpaid item case) on your account leading to be suspended or restricted by when those UPI cases carry over to certain amount.
2. Any problems please contact us for more details.
Shipping
1. All items will be shipped to buyer's address.
2. All items will be shipped within 24-48 working hours upon receipt of payment, and multiple items will be combined shipping.
3. In most cases, delivery takes around 3-5 business days, it's highly depended on the efficiency of the shpping carrier. If your item doesn't arrive on time, please contact us immediately for further assistance. Please note there is no local pickup service available.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one.
Please Note:
Please write us a message before your return, otherwise we will not accept the package.
Any product you return must be in the same condition you received it and in the original packaging.
Contact Us
1. We care about our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. We try our best to reply your email as soon as possible, please kindly allow 24 hours for us to response.
2. Our goal is to make sure you are a happy buyer and pleasant shopping with us. Please email us before leaving any 1 or 2 star ratings, negative response or open any dispute. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.
Qiaoxie
Best choice of motor parts
Shop CategoryStore Home OtherHot ItemExcellent Delivery
Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout UsNew List Item Engine Overhaul Rebuild Gasket Kit For Audi S5 A6 A8 Q7 VW Touareg 4.2L 2006-15 USD 228.49 Cylinder Head Gasket Set Kit Fit For 03-18 VW AUDI A5 A6 A7 Q7 BVJ BNS BAR 4.2L USD 226.99 New Engine Overhaul Rebuilding Gasket Seals For Audi S5 A6 A8 Q7 VW Touareg 4.2 USD 227.99 For Audi S5 A6 Touareg 4.2L Engine Overhaul Rebuilding Gasket Seals 079103383AQ USD 228.99 4.2L FSI Engine Rebuild Overhaul Gasket Seal Kit For Audi S5 A6 A8 Q7 VW Touareg USD 227.49 1 Roll 4M Car Butyl Tape Rubber Glue Headlight Sealant Retrofit Reseal Door 13ft
Description:
Rubber Sealant is a black, non-drying, non-hardening synthetic rubber based butyl rubber sealant suitable for use as a placement sealant tape for re-sealing headlights after a retrofit or for installation between the glass and metal/llastic areas of automotive headlights/windscreen. It will remain permanently sealing and
Maretial: Synthetic Butyl Rubber Color: Balck Length: Approx. 4m 13ft. (enough for re-sealing about two - four headlight assemblies.) Thickness: Approx. 9mm After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean, free from dust, oil and grease. Release the sealant from the release paper and pressit sufficiently around the pinch weld for a complete contact. When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the other coupling part. The purpose of the sealer is to provide for a watertight seal. In cold weather conditions it is best to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.Wide Range of Application:
(1) Butyl tape can be stuck on any type of metal, concrete, glass, plastic and porous surface without fear of falling off.
(2) sealing or resealing car headlights, windshield, headlamp, air
1 Pcs x 13ft. Black Butyl Rubber Headlight SealantNote:
1.Please kindly undertsand that slight color difference may exsit due to phtotgraphing condition.Thank you for your understanding!
2.If you have any questions or concerns, please contact us using the messaging system.Thanks！
Item SpecificsBrand :MODIGTType :Car Black Butyl Rubber Glue SealantNumber of Pieces :1Color :BlackPlacement on Vehicle :Left, Right, Front, RearFeatures :Sealing / Reduce Noise / Waterproof / Heat ResistantManufacturer Part Number :A Placement Sealant Tape For Re-sealing HeadlightFeatures 1 :Sealing / Reduce Noise / Waterproof / Heat ResistantMaterial :Synthetic Butyl RubberLength (ft.) :Approx. 4m 13ft.Thickness :Approx. 9mm 0.35''Package include :1 Pcs x 13ft. Black Butyl Rubber Headlight SealantUniversal Fitment :Yes
PaymentShippingReturnsContact Us
1. It will be much appreciated that you finish your payment asap or it will make UPI (unpaid item case) on your account leading to be suspended or restricted by when those UPI cases carry over to certain amount.
2. Any problems please contact us for more details.
1. All items will be shipped to buyer's address.
2. All items will be shipped within 24-48 working hours upon receipt of payment, and multiple items will be combined shipping.
3. In most cases, delivery takes around 3-5 business days, it's highly depended on the efficiency of the shpping carrier. If your item doesn't arrive on time, please contact us immediately for further assistance. Please note there is no local pickup service available.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one.
Please Note:
Please write us a message before your return, otherwise we will not accept the package.
Any product you return must be in the same condition you received it and in the original packaging.
1. We care about our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. We try our best to reply your email as soon as possible, please kindly allow 24 hours for us to response.
2. Our goal is to make sure you are a happy buyer and pleasant shopping with us. Please email us before leaving any 1 or 2 star ratings, negative response or open any dispute. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.
All rights reserved.
