VehicleCompatibility InformationMini Cooper S 2007-2009 1.6L TurbochargedPeugeot 207 2008-2014 1.6L TurbochargedPeugeot 207 Compact 2009 1.6L TurbochargedSYMPTOMS OF A FAULTY FUEL INJECTOR!Rough idling & stalling.The vehicle might shake and stall when idling if it is not getting enough fuel in the combustion chambers.!The engine misfires.Often caused by dirty or clogged fuel injectors.!A fuel smell.You might smell a strong fuel odour in and around your car if there is a leak or the injectors are releasing too much fuel. Your best online business partner
Fuel Injectors For 2014 2013 2012 2011 2010-2008 Peugeot 207 1.6L Turbocharged
VehicleCompatibility Information
Mini Cooper S 2007-2009 1.6L Turbocharged
Peugeot 207 2008-2014 1.6L Turbocharged
Peugeot 207 Compact 2009 1.6L Turbocharged
SYMPTOMS OF A FAULTY FUEL INJECTOR
!Rough idling & stalling.The vehicle might shake and stall when idling if it is not getting enough fuel in the combustion chambers.
!The engine misfires.Often caused by dirty or clogged fuel injectors.
!A fuel smell.You might smell a strong fuel odour in and around your car if there is a leak or the injectors are releasing too much fuel.
!Starting difficulties. When too much or too little fuel is being supplied this can prevent the engine from starting and lead to engine failure.
!Increased fuel consumption.
!The check engine light is on.
!Black or grey smoke.Black smoke is an indication that the air-fuel mixture is too rich. You can diagnose many different car problems by the colour of the exhaust gases. Read more about it here.
How to Replace Fuel Injectors
A quick disclaimer: This job might not be that tricky for most run-of-the-mill gas engines, but diesel is another story altogether. While gasoline is injected into the engine under relatively lowpressure, diesel is often flowing through the system at pressures as high as 20,000 PSI. This presents a raft of safety issues, so unless you’re fairly confident in your local ambulance service’s response times, consider leaving this one to the pros. Some gas engines might also be a hassle depending on how the engine compartment is laid out and how many components you’ll have to remove to get to the fuel injectors themselves. So, make sure you know what you’re getting into before you get to work.
1.The first step in replacing a fuel injector is to relieve the pressure in the fuel system itself.Skipping this step could result in a messy and dangerous project, so refer to your vehicle’s owner’s manual for specific instructions on how to depressurize the fuel system. If the vehicle has been on recently, allow the engine to cool, then locate the fuel pump fuse or the relay that controls the fuel pump. Don’t pull it just yet; start the engine and disconnect the fuse. If all goes well, the engine should sputter out due to a lack of pressurized fuel.
2.Many fuel injection systems use a centralized fuel rail to route fuel to each individual injector. This will have to be removed to get to the injectors themselves, so disconnect the main fuel line feeding into the rail. Some systems will have fuel lines at each end of the rail and they’ll both need to be removed in order to proceed. Once this is done, simply remove the bolts or screws and the rail should pop right off. Some vehicles will have an individual fuel line feeding into each injector, which you can remove one by one.
3.With the tops of the fuel injectors exposed, it’s now time to remove the wiring harness connected to each injector. In some cases, the wiring will be located on top of the fuel rail itself and should be removed before disconnecting the rail. These harnesses are usually held on by little more than a single spring, which you can pry out with a flathead screwdriver or similar implement. Make sure to hold onto this small metal spring, as it’s all too easy to misplace.
4.Now you’re ready to get pulling. Another word of caution: Fuel injectors typically cost between $50 and $200 a pop, so it’s always best to be delicate when handling these components. Of course, in the case of a replacement, the fuel injector you’re pulling is already damaged or broken, but in case you misdiagnosed the specific injector that needed replacing, you don’t want to end up ruining a perfectly good part. It’s also possible for a fragile part of the injector to break off and become lodged in the cylinder should you remove it in too much of a rush, so I’d preach caution here.
5.After the fuel injector is removed, installation is a walk in the park. Simply lubricate the seals on the new injector, replace it in the same hole you took it out of, and reconnect the wiring harness. Reattach the fuel rail or individual fuel lines, bolt everything down, and replace the fuel pump fuse. Once you start up the vehicle, the fuel system should repressurize itself. With any luck, the engine will be purring like a cat in a is not included. Professional installation is recommended
-Accessories: You will get exactly showing in the picture
-Please confirm your original part number before purchasing
-Please contact us for anything we can help you with
Item SpecificsBrand Maxleve-autopartManufacturer Warranty 1YearManufacturer Part Number MA15129201XType Fuel InjectorVintage Car Part NOConnector Color As Shown in the PictureConnector Type Gasoline Connector Type??MaleUniversal Fitment YesInjector Design Metal & composite plasticBundle Listing NoFitment Type Direct ReplacementOE/OEM Part Number FJ1110, 13537528351Placement on Vehicle FrontFuel delivery type Fog-type sprayOE Spec or Performance/Custom OE Spec
Payment
We only accept payment through PayPal.
Shipping
We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
Returns
The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
Contact Us
We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Your best online business partner
Shop CategoryStore Home throttle body fuel injector switch cv axleBest Sales Throttle Body For Ford F-250 F-350 Super Duty 2004 2003 2002 2000 1999 V8 5.4L USD 67.99 Throttle Body For Chevrolet Impala Monte 5.3L 2006-2007 Trailblazer 4.2L 2003-07 USD 61.49 Throttle Body For Chrysler Town & Country Dodge Grand Caravan 4.0L 2008-2010 USD 53.49 CV Axle For Subaru Forester 2003-2008 H4 2.5L Front LH or RH USD 61.39 CV Axle For Infiniti G37 2009 2010 2011 2012 2013 V6 3.7L Front Right AWD Sedan USD 65.39 Delivery
Newly Listed CV Axle For Toyota Tundra 2010-2019 Sequoia 2010-12 4.6L Front Left or Right 4WD USD 85.89 Fuel Injectors For 2006 2005 2004 2003 Porsche Cayenne 4.5L 94860513001 USD 46.49 Power Window Switch Front Left for Mercedes-Benz GL450 2007-2012 ML320 2007-2009 USD 20.79 CV Axle For Nissan Murano 2009-2014 V6 3.5L DOHC Front Right FWD 391001AA0A USD 88.39 Power Window Switch Rear Right & Left Front Right for Lincoln Town Car 2003-2008 USD 9.59 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Fuel Injectors For 2014 2013 2012 2011 2010-2008 Peugeot 207 1.6L Turbocharged
VehicleCompatibility Information
Mini Cooper S 2007-2009 1.6L Turbocharged
Peugeot 207 2008-2014 1.6L Turbocharged
Peugeot 207 Compact 2009 1.6L Turbocharged
SYMPTOMS OF A FAULTY FUEL INJECTOR
!Rough idling & stalling.The vehicle might shake and stall when idling if it is not getting enough fuel in the combustion chambers.
!The engine misfires.Often caused by dirty or clogged fuel injectors.
!A fuel smell.You might smell a strong fuel odour in and around your car if there is a leak or the injectors are releasing too much fuel.
!Starting difficulties. When too much or too little fuel is being supplied this can prevent the engine from starting and lead to engine failure.
!Increased fuel consumption.
!The check engine light is on.
!Black or grey smoke.Black smoke is an indication that the air-fuel mixture is too rich. You can diagnose many different car problems by the colour of the exhaust gases. Read more about it here.
How to Replace Fuel Injectors
A quick disclaimer: This job might not be that tricky for most run-of-the-mill gas engines, but diesel is another story altogether. While gasoline is injected into the engine under relatively lowpressure, diesel is often flowing through the system at pressures as high as 20,000 PSI. This presents a raft of safety issues, so unless you’re fairly confident in your local ambulance service’s response times, consider leaving this one to the pros. Some gas engines might also be a hassle depending on how the engine compartment is laid out and how many components you’ll have to remove to get to the fuel injectors themselves. So, make sure you know what you’re getting into before you get to work.
1.The first step in replacing a fuel injector is to relieve the pressure in the fuel system itself.Skipping this step could result in a messy and dangerous project, so refer to your vehicle’s owner’s manual for specific instructions on how to depressurize the fuel system. If the vehicle has been on recently, allow the engine to cool, then locate the fuel pump fuse or the relay that controls the fuel pump. Don’t pull it just yet; start the engine and disconnect the fuse. If all goes well, the engine should sputter out due to a lack of pressurized fuel.
2.Many fuel injection systems use a centralized fuel rail to route fuel to each individual injector. This will have to be removed to get to the injectors themselves, so disconnect the main fuel line feeding into the rail. Some systems will have fuel lines at each end of the rail and they’ll both need to be removed in order to proceed. Once this is done, simply remove the bolts or screws and the rail should pop right off. Some vehicles will have an individual fuel line feeding into each injector, which you can remove one by one.
3.With the tops of the fuel injectors exposed, it’s now time to remove the wiring harness connected to each injector. In some cases, the wiring will be located on top of the fuel rail itself and should be removed before disconnecting the rail. These harnesses are usually held on by little more than a single spring, which you can pry out with a flathead screwdriver or similar implement. Make sure to hold onto this small metal spring, as it’s all too easy to misplace.
4.Now you’re ready to get pulling. Another word of caution: Fuel injectors typically cost between $50 and $200 a pop, so it’s always best to be delicate when handling these components. Of course, in the case of a replacement, the fuel injector you’re pulling is already damaged or broken, but in case you misdiagnosed the specific injector that needed replacing, you don’t want to end up ruining a perfectly good part. It’s also possible for a fragile part of the injector to break off and become lodged in the cylinder should you remove it in too much of a rush, so I’d preach caution here.
5.After the fuel injector is removed, installation is a walk in the park. Simply lubricate the seals on the new injector, replace it in the same hole you took it out of, and reconnect the wiring harness. Reattach the fuel rail or individual fuel lines, bolt everything down, and replace the fuel pump fuse. Once you start up the vehicle, the fuel system should repressurize itself. With any luck, the engine will be purring like a cat in a is not included. Professional installation is recommended
-Accessories: You will get exactly showing in the picture
-Please confirm your original part number before purchasing
-Please contact us for anything we can help you with
PaymentShippingReturnsContact UsWarning
We only accept payment through PayPal.
We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
All right reserved.
