Compatible FCC ID#(s):
Alternate Spellings
Part #(s)
IC ID#: 1513A-7146 7146VModern Viper 7146V 4-Button Remote Control Transmitters 434MHZ 2/66 CODE For The Viper 5305V
EZSDEI7146 EZSDE17146
introduced in 2019 and replace many of the older legacy Viper, Avital, Python, Clifford and Automate remote controls.
1 way 1way one oneway
7146V 7146 V 1513A-7146
IC ID#: 1513A-7146
Dealer #(s)
Button Count:
3 Buttons; Lock, Unlock, Remote Start
Battery (installed):
2; CR2016
Frequency:
907-923 MHz
LED Light Color:
Blue
Circuit board #s:
#s on Chip on board:
Condition Notes:
Pre-Owned ready to program to your compatible vehicle RKE system.
Compatible Aftermarket Installed Systems:
4105V
3105V
3305V
5105V
5305V
D9146V
Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop.
1a. With UNLOCK ALL option:
Press and release, then press and hold the Programming button
of the XL202 module. The LED flashes slowly.
1b. With DRIVER DOOR PRIORITY UNLOCK option:
Press and hold the Programming button of the XL202 module.
The LED flashes slowly.
2. Hold the Function button on the remote until it emits a long beep
and its LED turns ON solid (approximately 12 seconds).
3. Press and hold the Start button until the remote beeps 3 times and
its LED turns ON solid.
4. Press the Lock button on the remote. Confirmation tones are heard
upon successful programming, and the XL202 LED turns ON
solid for one second, then turns OFF to indicate the pairing was
completed successfully.
5. When programming is finished, release the Programming button
on the XL202.
6. Wait 30 seconds for remote to exit programming. All remote
lights will be off when the programming mode has been exited
