Fast-Autos.net


Search for a different part:

OEM for HARLEY DAVIDSON TOUR PACK LATCHES CLASSIC ELECTRA GLIDE ULTRA PAK PAC HD For Sale - New and Used


OEM for HARLEY DAVIDSON TOUR PACK LATCHES CLASSIC ELECTRA GLIDE ULTRA PAK PAC HD
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

OEM for HARLEY DAVIDSON TOUR PACK LATCHES CLASSIC ELECTRA GLIDE ULTRA PAK PAC HD:
$34.95

If you are installing on pre 1993 saddle bags you need to request 2 extra 3/4" screws with your order. There is no charge for the extra screws if you inform me before I ship.

If you need assistancedeciding your exact fitment send me a question in an email and I will respond as soon as possible. Due to the changes in tour packs and saddlebags over 30 years, there are various fitment changes that I can assist you with.I check emails several times a day and normally will contact you within hours and many times within minutes.

Orders on Friday, Saturday andSunday ship on Monday.

Caution My Fellow Riders:Do not use an oversize #8 or #6 pan head screw with the hasp. It will damage your lid edge. The bottom of the hole is already too close to the bottom of the lid and enlarging the hole for a #8 screw will require thehole in the lid tobeenlarged for a #8 screwand can damage the lid. Also, when comparing a pan head screw toa button head screw that comes with my kit, you can see the head of the pan head screw is much larger. Since the pan head is too large, when closing the lid, it willdepressthe top of the pan causing severe scraping and a misalignment of the latch. Ioffer this advice because I care and know my design works. My screwsizesthat I supply with my listings are the correctsize and are on thousandsof latches out there. I even include a set of directions within the screw bag to help you use the correct screw length for the position needed. Please take time to read it and if you have questions, contact me 7 days a week from 10AM to 11PM EST for my advice. Check my response.


If your tour pack or saddlebags are older than 1997, you should contact me prior to purchasing as I will be happy to advise you which hasp to request with your order. If you can attach pictures of what you are working on, it will be to your benefit. I am happy to ship the 1401U hasp or the (1405 = 1401M) hasp instead of the 1406 that automatically ships with all orders if you do not request the change. I you are ordering for 1992 or older saddlebags, you will also need to request 2 extra 3/4" screws with the order. No extra charge and happy to include if asked for before I ship, There is no charge for my advise or the substitute of the hasp that you may require.

The red tour pack lid shows how a loose hasp will ruin your day and tour pack lid.

Harley rivets become loose and make holes bigger and bigger.

A #8 screw will make the hole larger than my hasp screw.

A #6 screw will come loose because the hasp does not have the correct size hole for tapping.

Ioffer this advice because I care and know my design works. My screwsizesthat I supply with my listings are the correctsize and are on thousandsof latches out there. Check my response.



There is NO SPACER in this kit.

Spacers can not be added to this listing.

If you don't know why a spacer is needed, please contact me first.


Be sure to visit my storefor other latch kits. Click on my name.

tombuyandsell

I know you will be satisfied with your purchase. I have supplied over 15000 bikers

with these latches totaling over 30,000 latches.

Check my response.

NOTE:

Using Self-Tapping Screws on the latch creates a high probability of weakening the stand-off causing premature latch failure. I totally discourage using self-tapping screws.

NOTE: This listing does not include spacers. I sell custom made spacers in other listings. Click here tombuyandsell to visit my store for all of my listings.

This listing is for two new Harley OEM latches, properly tapped for the included machine screws of correct length.

Latches are manufactured by Franzen, supplier to Harley.

Included in this listing:

Two (2) Chrome polished finished, Franzen latches, properly tapped

Two (2) full length machine screws for front mounting

Two (4) full length machine screws for rear mounting or forward mounting without lock catch.

Two (2) 1406 Hasp tapped for machine screws using a low profile headand not a Phillips head screw which is too large and will cause considerable scraping on the top of the tour pack pan.

Hasps includes new backing plates.

Two Allen wrenches: one for hasp screws and one for latch and spacer screws.

Spacer screws included with washers and lock nuts. Yes, the spacer should be attached prior to latch attachment. This is totally your choice.

Note: If your spacer is Pre-2007 you may require a minor modification as outlined in my directions.

Note: If you have a Franzen hasp attached and rivets are secured tightly, this latch will mate

with your existing hasp from 1994/1996 to 2013.

Presto hasps used prior to 1994/1996 had 2 different mounting configurations.

If you have one of these, contact me prior to purchasing. I have replacements for all hasps used at no additional cost and gladly substitute them if requested prior to shipping.

Franzen hasps from 1994 until 1996 had a slightly different mounting configuration.

If you have one of these, contact me prior to purchasing.

If you want more detailed information, please see below or contact me with pictures of what you are working on.

I know the history of the latch as simple as it may seem and I can supply the correct fitment for your vintage that you can not even obtain from Harley.

There is NO SPACER in this kit.

Spacers can not be added to this listing.


Click here tombuyandsell to visit my store for all of my listings.

If you do not know what a spacer is or if you need them please contact me. Please don't purchase from this listing and then leave me response stating it would have been great if they were included. I offer spacers in another listing.

Why are there no spacers? 99% of my customers already have spacers and I'd rather savefellow riders money they don't need to spend.

If the following is more than you want to read, contact me through email. In most cases I can explain what you need to order if you send pictures of what you are working on.

If you need more complete kits, please visit my store. Click here tombuyandsell to visit my store for all of my listings.

Thanks for looking. I have been selling Harley latches on since 1-6-2004.

THIS LISTING IS FOR (2) TWO LATCHES, TWO (2) HASPS AND ALL THE SCREWSNEEDED.

PLEASE READ ENTIRE LISTING BEFORE PURCHASING

I have always gone out of the way to help my fellow riders, but to open a line of communication, you must start with ’s email. I check emails several times a day and normally will contact you within hours and many times within minutes. I welcome questions.

MYLATCH IS THE EXACT OEM FRANZEN LATCH THAT YOU WOULD RECEIVE FROM HARLEY BUT IN A COMPLETE PACKAGE INCLUDING MY DIRECTIONS AND TAPPED LATCHES WITH THE CORRECT LENGTH SCREWS.

To be able to identify the latch as the OEM please look at the following pictures.

NOW FOR LATCH IDENTIFYING 101

The below latch is a copy of a Franzen with no identifying marks.


TWO HASPS & TWO LATCHES ARE BEING SOLD WITH THIS LISTING.

IF YOU NEED SPACERS OR OTHER TOUR PACK HARDWARE,PLEASE SEE MY OTHER LISTINGS BY CLICKING HERE tombuyandsell to visit my store for all of my listings.

IF YOU HAVE ANY QUESTIONS ON MOUNTING,I AM ALWAYS HAPPY TO HELP.

PLEASE EMAIL ME THROUGH

LATCHES ARE OEM, NOT AFTER-MARKET.

OEM IS THE TERM USED TO STATE THEY ARE MANUFACTURED BY THE ORIGINAL EQUIPMENT MANUFACTURER. THEY ARE EXACTLY THE RIGHT PART.

THESE LATCHES WILL FIT80'S TO 2013.

THIS LATCH WILL FIT THE NEW SPACERS AS WELL AS THE OLD SPACERS WITH A MINOR MODIFICATION TO THE OLD PLASTIC SPACER WHICH I WILL EXPLAIN IN THE NEW DIRECTION SHEET.

YOU WILL NOT NEED TO MAKE ANY CHANGE TO YOUR TOUR PACKUNLESS YOU CHOOSE TO ATTACH YOUR SPACER PRIOR TO ATTACHING THE LATCH AS MY DIRECTIONS ILLUSTRATE.

THEY WILLREPLACE THE OLDER STYLE LATCH MADE BY PRESTO BECAUSE THISLISTING DOESCOME WITH A LID MOUNTED HASP. THE OLDER STYLEPRESTO LATCH LOOKS SIMILAR BUT PART OF THE UPPERHASP SHOWS THROUGH THE LATCH FACE WHEN CLOSED. WHEN ORDERING TO REPLACE THE PRESTO LATCH, YOU SHOULD NORMALLY ASK FOR A CHANGE TO THE 1401M HASP=1405 HASP WHEN MAKING YOUR PAYMENT OR CONTACT ME BEFORE ORDERING IF YOU ARE NOT SURE OF THE HASP YOU NEED. IN A FEW RARE CASES YOU MAY NEED THE 1401U (UNMODIFIED HASP) THAT HAS SCREW STAND-OFFS ON THE REAR OF THE HASP SIMILAR TO THE STAND-OFFS FOUND ON THE LATCH. IN THIS CASE YOU SHOULD ASK FOR THE 1401U HASP WHEN ORDERING.


THE FOLLOWING PICTURE SHOWING HASPS ARE TO HELP IDENTIFY THE HASP YOU NEED FOR A FRANZENLATCH ASSOLD IN THIS LISTING.

THE FOLLOWING IS VITAL AND MORE IMPORTANT THAN YOU CAN IMAGINE.

THE LOWERLATCHPART THAT ATTACHES TO THEBOTTOM OF THE TOUR PACK,WHEN RECEIVED NEW FROM HARLEY. THEY HAVE HOLES REQUIRING THE USE OF SELF TAPPING SCREWS. I HAVE THREADED THE SCREW HOLES MAKING INSTALLING THEM A BREEZEWITH THE INCLUDED NON-SELF TAPPING SCREWS.YOU WILL BE BETTER OFF IF YOU DON'T USESELF TAPPING SCREWS.

THE TIP OF THE SELF TAPPING SCREWS ARE NOT A FULL THREAD TO THE END WHICH IS A MAJOR REASON FOR POOR GRIPPING AND FAILURE OF THE SCREW!ALSO, SINCE THE NEW STAND-OFFS HAVE BEEN USED, I HAVE FOUND THAT USING SELF-TAPPING SCREWS MAY CAUSE THE STAND-OFF TO BREAK DUE TO THE POOR THREADING ABILITY OF THE SELF-TAPPING SCREW.

PLEASE NOTE: International shipping on this listing is being handled through the Global shipping at this time. I have nothing to do with the rate charged by this program.

CHECK OUT MY OTHER LATCHES. IF YOU HAVE ANY QUESTIONS DON'T HESITATE TOEMAIL ME THROUGH THE CONTACT SELLER LINK.

Igo out of the way to help my fellow riders but now in order to open a line of communication with me, you must use ’s email. I check emails several times a day and normally will contact you within hours if not minutes. I welcome questions. For my best help include pictures of what you are working on.




.

Posted with Mobile


Buy Now



Search for a different part:


Related Cars:



2010 Veritas RS III
2010 Veritas RS III

2000 Saab 9-3 Viggen
2000 Saab 9-3 Viggen

2009 Edo_Competition Murcielago LP710 Audigier Edition
2009 Edo_Competition Murcielago LP710 Audigier Edition

2007 Edo_Competition Lamborghini Murcielago LP640
2007 Edo_Competition Lamborghini Murcielago LP640

2009 Carlsson CK63 S
2009 Carlsson CK63 S

2004 Dodge Ram SRT-10
2004 Dodge Ram SRT-10

2003 Gemballa Cayenne GT 600
2003 Gemballa Cayenne GT 600

2004 Mitsubishi Eclipse Concept-E
2004 Mitsubishi Eclipse Concept-E

2005 Cadillac STS SAE 100
2005 Cadillac STS SAE 100

2009 Mansory LINEA Vincero
2009 Mansory LINEA Vincero

Related Items:

8PCS OEM Ignition Coils Motorcraft DG508 For Ford,F150 4.6L 5.4L 6.8L 3W7Z12029A picture

8PCS OEM Ignition Coils Motorcraft DG508 For Ford,F150 4.6L 5.4L 6.8L 3W7Z12029A

$88.88



Genuine OEM for Cummins NOx Sensor For Cummins 2871974 2894943 picture

Genuine OEM for Cummins NOx Sensor For Cummins 2871974 2894943

$214.99



6 OEM Ignition Coil For Toyota Camry Avalon 90919-A2005 Highlander 90919-02255 picture

6 OEM Ignition Coil For Toyota Camry Avalon 90919-A2005 Highlander 90919-02255

$90.00




Contact | Copyright Information | Privacy Policy & Terms of Use