New OEM Ford Warn Winch Kit with all parts and pieces to install, genuine Ford accessory plug and play for 2017-2026 Superduty models with some #LC3Z-19E536-B, LC3Z-19E536-C, LC3Z-19E536-AA, M-1821-SD, M1821SD are all the same
🚨 CRITICAL MULTI-GENERATION COMPATIBILITY GUIDE 🚨
Please read the factory application notes below very carefully before ordering. While the inner 12,000 lb Warn winch assembly is physically identical across multiple generations, structural frame changes require specific bracket applications in 2017-2019 models and 2023-2026 models - exact fit with brackets included in this kit for 2020-2022 models. Any questions, contact us.
📦 1. EXACT FIT AS IS for 2020-2022 Super Duty: This kit is a 100% direct, factory-spec bolt-on installation for standard 2020-2022 Super Duty trucks with OEM front bumpers. F250 thru F550 are the same with minor notations to auxiliary cooler needed on some models - read excemtion below.
Gas Engines (6.2L / 7.3L Godzilla): Requires the vehicle to be factory-equipped with the Ford Dual Battery package to sustain high-amperage recovery draws.
Diesel Engines (6.7L Power Stroke): Requires the vehicle to be factory-equipped with the Dual Extra Heavy-Duty Alternator (397-Amp total output) package.
⚠️ DIESEL EXCEPTION: Does NOT directly fit F-350, F450, F550 trucks running the 6.7L Diesel engine paired with a 4.10 rear axle ratio (these models contain a front auxiliary radiator that blocks the brackets). This can me moved however - see below.
🛠️ 2. 2023-2026 TRUCKS APPLICATION: The kit shown is identical except the hidden bumper brackets differ.The winch motor, synthetic line, and electronics in this kit fit 2023+ trucks perfectly. However, the steel installation brackets in this box are shaped for older frames. To install this system cleanly into a redesigned 2023, 2024, 2025, or 2026 F-250/F-350, you must discard our brackets and purchase:
WARN Aftermarket Hidden Mount Bracket Kit — Part # 112554 (Preserves parking sensors/adaptive cruise radar blocks).
⚠️ DIESEL EXCEPTION: Does NOT directly fit F-350, F450, F550 trucks running the 6.7L Diesel engine paired with a 4.10 rear axle ratio (these models contain a front auxiliary radiator that blocks the brackets). This can me moved however - see below.
⚙️ 3. 2017–2019 TRUCKS APPLICATION: The kit shown is identical except the hidden bumper brackets differ.The winch motor, synthetic line, and electronics in this kit fit 2017-2019 trucks perfectly. However, you must set aside our brackets and purchase two specific retail components directly from Warn:
WARN Hidden Mount Bracket Kit — Part # 98055
WARN Bumper Skirting Close-out Kit — Part # 98336 (Note: Not compatible with 2017-2019 trucks equipped with front Adaptive Cruise Control bumper radar modules) without modification.
⚠️ DIESEL EXCEPTION: Does NOT directly fit F-350, F450, F550 trucks running the 6.7L Diesel engine paired with a 4.10 rear axle ratio (these models contain a front auxiliary radiator that blocks the brackets). This can me moved however - see below.
🔧 NOTE ON EXPERT MODIFICATIONS (F-350, F-450, F-550 with Auxiliary Coolers):
While factory Ford documentation states this kit will not fit F-350 thru F-550 with an auxiliary lower transmission/power steering fluid cooler tucked behind the front bumper, several aftermarket custom installers have successfully completed this installation by custom-relocating the factory auxiliary cooler units and fluid lines higher into the engine bay. You Tube has details on how to do this.
⚠️ PLEASE NOTE: Any modification or relocation of your truck's factory cooling loops requires custom fabrication, custom brackets, and line routing, and it is done ENTIRELY at the buyer's own risk. We do not provide instructions, advice, or technical support for vehicle cooling system modifications. This item is sold strictly as a factory-spec kit. Returns will NOT be accepted for "Does Not Fit" if your vehicle features an unmodified auxiliary cooler assembly and you choose not to modify it!
Vehicles equipped with front parking aid sensors will need to disable them within the SYNC driver assistance options menu.
The winch was co-developed by the engineers at Ford and WARN to provide a winch solution for the Super Duty that offers an OEM level of fit, finish, durability, and vehicle integration. Made in the USA.
The Super Duty Ford Performance by WARN Winch Kit includes:
- WARN ZEON 12,000 lb. Winch
- 70-floot synthetic winch line
- 12,000 lb. Epic winch hook
- "Ford Performance" branded blue hook strap
- Wireless and wired remote controls
- Required bracketry and hardware
- Vehicles that require a front license plate bracket will need to also order one of the following Front License Plate Brackets (sold separately):
2020-2022 Models, please orderPart Number LC3Z-17A385-BA
2023-2026, please order Part Number PC3Z-17A385-BA
Please contact us with any questions!! Thank you!!!
PLEASE NOTE! YOU WILL NEED TO SIGN FOR THIS SHIPMENT!
Due to outrageous shipping costs in todays economy, oversize boxes are nearly double what is used to cost to ship...for that reason, States in the Mountain and Pacific time zones are sadly costing buyers more for shipments. We do apologize for this but the truth is, it costs more just to ship out West...which we can not justify making folks in the rest of the USA pay for with "free shipping" as a part of the total cost just to cover the Western States costs. Thank you for understanding!
Disclaimer: PartsBrokersLLC sells its products through its authorized sales channels ( or our own site only). We do not list or sell through unauthorized websites or social media platforms.
Attention Export Buyers! For items that are too large for USPS, buyers may arrange shipment through an independent international freight-forwarding service. PartsBrokersLLC is not affiliated with any third-party forwarding provider. Please contact the selected provider directly for information about their procedures and charges.
