GKTECH S13/S14 240sx +20mm > +45mm Front lower control arms (FLCA's)The GKTECH V2 High Clearance LCA's are designed as a direct replacement for an OEM style LCA but with adjustment and loads of tie rod clearance for maximum dorifto. Our Budget LCA's are great for someone that already has caster rods or wants caster rods as a separate piece. Even with the addition of our V4 high clearance caster rods, the cost of going this route is around 25% cheaper than our premium 1pc LCA/caster rod piece. The arms offer 25mm of adjustment, will support 70+ degrees of steering lock, you can still run an OEM style swaybar and a lock stop has been incorporated into the design. These lower arms are based off CMM data, are CAD designed, FEA tested, have CNC machined ends and the main body is laser cut and CNC machined 16mm thick chromoly steel for maximum strength. To finish the arms off they're E-coated (aka electrophoresis coating) for rust prevention and we're exclusively using Teflon lined bearings with dust covers for increased longevity. - Direct replacement of the OEM LCA- Feature 5/8" Teflon lined sphericals (inner) which eliminates the flex found in factory rubber bushing offering a more direct and predictable feel.- Laser cut and CNC machined from 16mm thick 4130 Chromoly sheet.- CMM measured, CAD designed, FEA tested and CNC machined.- Available in 3 different lengths;0 > +25mm +20 > +45mm (this listing is for +20 > +45mm)+40 > +65mm NOTE #1: On an S13 or R32 the length is going to be an additional 9mm in length over the listed lengths. Ie. if you run our shorter LCA's on an S13 the shortest that they can be run is +9mm and the shortest the longer LCA's can be run is +49mm An OEM style ball joint is to be used, you can either use your original ball joint or purchase new ones which we do sell, please see the following fitment guide: BJ274, which fits the following vehicles; - Nissan S13 240sx (front only)- Nissan S13 Silvia (front only)- Nissan A31 Cefiro (front only)BJ291, which fits the following vehicles; - Nissan S14 240sx (front only)- Nissan S14 Silvia (front only)- Nissan S15 Silvia (front only)- Nissan Skyline R33 (front and RWD only)- Nissan Skyline R34 (front and RWD only)The V2 High clearance lower control arms have been designed off OEM and the ball joints we supply, which can be seen above. They are an aftermarket OEM replacement however, we cannot confirm other branded OEM replacement ball joints O.D matches the V2 High clearance LCA's that we sell. Vehicle Compatibility: - Nissan S13 240sx- Nissan S13 Silvia- Nissan S14 240sx - Nissan S14 Silvia - Nissan S15 Silvia- Nissan Skyline R32 GTS-T - Nissan Skyline R33 GTS-T - Nissan Skyline R34 GTT - Nissan C33 - Nissan C34 - Nissan C35 - Nissan A31 Cefiro - Nissan Z32 300zx GKTECH S13/S14 240sx +20mm > +45mm Front lower control arms (FLCA's)
The GKTECH V2 High Clearance LCA's are designed as a direct replacement for an OEM style LCA but with adjustment and loads of tie rod clearance for maximum dorifto. Our Budget LCA's are great for someone that already has caster rods or wants caster rods as a separate piece. Even with the addition of our V4 high clearance caster rods, the cost of going this route is around 25% cheaper than our premium 1pc LCA/caster rod piece. The arms offer 25mm of adjustment, will support 70+ degrees of steering lock, you can still run an OEM style swaybar and a lock stop has been incorporated into the design.
These lower arms are based off CMM data, are CAD designed, FEA tested, have CNC machined ends and the main body is laser cut and CNC machined 16mm thick chromoly steel for maximum strength. To finish the arms off they're E-coated (aka electrophoresis coating) for rust prevention and we're exclusively using Teflon lined bearings with dust covers for increased longevity.
- Direct replacement of the OEM LCA
- Feature 5/8" Teflon lined sphericals (inner) which eliminates the flex found in factory rubber bushing offering a more direct and predictable feel.
- Laser cut and CNC machined from 16mm thick 4130 Chromoly sheet.
- CMM measured, CAD designed, FEA tested and CNC machined.
- Available in 3 different lengths;
0 > +25mm
+20 > +45mm (this listing is for +20 > +45mm)
+40 > +65mm
NOTE #1: On an S13 or R32 the length is going to be an additional 9mm in length over the listed lengths. Ie. if you run our shorter LCA's on an S13 the shortest that they can be run is +9mm and the shortest the longer LCA's can be run is +49mm
An OEM style ball joint is to be uséd, you can either use your original ball joint or purchase new ones which we do sell, please see the following fitment guide:
BJ274, which fits the following vehicles;
- Nissan S13 240sx (front only)
- Nissan S13 Silvia (front only)
- Nissan A31 Cefiro (front only)BJ291, which fits the following vehicles;
- Nissan S14 240sx (front only)
- Nissan S14 Silvia (front only)
- Nissan S15 Silvia (front only)
- Nissan Skyline R33 (front and RWD only)
- Nissan Skyline R34 (front and RWD only)
The V2 High clearance lower control arms have been designed off OEM and the ball joints we supply, which can be seen above. They are an aftermarket OEM replacement however, we cannot confirm other branded OEM replacement ball joints O.D matches the V2 High clearance LCA's that we sell.
Vehicle Compatibility:
- Nissan S13 240sx
- Nissan S13 Silvia
- Nissan S14 240sx
- Nissan S14 Silvia
- Nissan S15 Silvia
- Nissan Skyline R32 GTS-T
- Nissan Skyline R33 GTS-T
- Nissan Skyline R34 GTT
- Nissan C33
- Nissan C34
- Nissan C35
- Nissan A31 Cefiro
- Nissan Z32 300zx
× × ×
BUY NOW You might also like GKTECH S chassis to Z33 Banjo to Banjo braided clutch line OEM replacement GKTECH S/R Chassis OEM Rear Knuckle Spherical Bushes - 30.5mm (PAIR) GKTECH S14A 200SX (Kouki) Radiator Cooling Side Panels (Pair) GKTECH Z33 350z/G35 Skyline Solid gearbox mount - Stiffen up your drivetrain Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask us a question
© GKTech USA
Shipping & Payments
Click the Shipping & Payments tab above the listing description for more info
Payment
Accepted Payment Methods
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on !
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Buyer will pay for return shipping.
integration by
