Fast-Autos.net


Search for a different part:

Front Rear Premium Ceramic Brake Pads Fits 1999-2004 Ford Mustang SVT Cobra 2WD For Sale - New and Used


Front Rear Premium Ceramic Brake Pads Fits 1999-2004 Ford Mustang SVT Cobra 2WD
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Front Rear Premium Ceramic Brake Pads Fits 1999-2004 Ford Mustang SVT Cobra 2WD:
$41.37

  • Front Rear Premium Ceramic Brake Pads Fits 1999-2004 Ford Mustang SVT Cobra Ford

    Front Rear Premium Ceramic Brake Pads Fits 1999-2004 Ford Mustang SVT Cobra 2WD

    Front Rear Premium Ceramic Brake Pads Fits 1999-2004 Ford Mustang SVT Cobra 2WD

    Essentially, hydraulic pressure forces a piston against the brake pads set inside the brake caliper. The caliper is free floating so that the pressure from the pads is evenly applied to each side of the brake rotor to slow or stop the wheel. The rotor is connected to and spins with the wheel and hub. The friction of repeated stopping will wear down the brake pads. The rotor wears as well, but the pads wear much faster.

    If you notice any squealing or scraping noises while driving your vehicle and applying your brakes, that is a good sign that your pads are worn and in need of replacement. You might also hear squealing or scraping sounds while NOT applying the brakes and when you apply the brake, the noises stop. That is also an indicator of worn or misaligned pads.
    Before starting, make sure your vehicle is parked on a flat level surface and you have your parking brake set. This is to make sure your vehicle doesn't roll off the jack which could be quite dangerous. If you do not have a floor jack or a breaker bar that fits your wheel's lug nuts, you can use the scissor jack and tire iron that came with your vehicle...they will work just fine for this. If you do use a breaker bar with a socket, make sure it is the correct size for the lug nuts otherwise you could round off the corners and make removal difficult. I do recommend buying a set of jack stands in either case because they are pretty cheap and provide much more safety for you when your vehicle is elevated off of the ground.

    Before jacking up the vehicle, you can use your tire iron or breaker bar to break loose the lug nuts on the wheel. This is much easier and safer while the car is firmly on the ground because it might require a decent amount of force to loosen them. If you have difficulty, try to position yourself to use your own body weight to help loosen the lug nuts.

    Using your floor jack or scissor jack, elevate the vehicle using the jack points defined in your vehicle manual. Once the wheel is clear of the ground, place your jack stand in position to support the vehicle. If you are using a hydraulic floor jack, you MUST use a jack stand as the floor jack will tend to "sink" over time. A scissor jack is less likely to move, but I still recommend jack stands...better safe than sorry.

    With the wheel safely off the ground, go ahead and remove the lug nuts. After they are removed, you can slide the wheel off of the hub and set it aside. You now have access to the rotor and brake caliper.


    Item SpecificsBrand sinwonpartsManufacturer Part Number sinwon807465Friction Material Bonding Type BondedMaterial CeramicGrade Description PremiumType Brake Pads SetBrake Pad Compound Ceramic Low Dust FormulaManufacturer Warranty 1 YearBenifits Comfortable and Quiet Green and DustlessShim Attachment Type StakedCharacteristic Anti Noise ShimInterchange Part Number 412,627 front and rear ceramic brake pads kitPlacement on Vehicle Front,Rear,Left,RightPads Quality 8x Ceramic PadsOther Part Number brake pad replacement,driver and passengerFitment Type Direct ReplacementFront Brake Pad Internal Lenth Size 171.0 mmFront Brake Pad Internal High Size 51.56 mmFront Brake Pad Internal Thickness Size 15.0 mmRear Brake Pad Internal Lenth Size 202.0 mmRear Brake Pad Internal High Size 64.8 mmRear Brake Pad Internal Thickness Size 19.0 mmRear Brake Pad Internal Thickness Size 19.0 mm
    Payment ☆ We will only ship to the confirmed shipping address given with the payment.☆ Payments are expected within 7 days after the last winning sale is closed; Otherwise Unpaid Item Dispute will be filed with .Shipping ☆ All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.☆ We ship the package to your shipping address in . Please tell us your shipping address if it is different from the one in .☆ The tracking number will be given for the customer to check the shipping status online (registered or faster service only).☆ We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on during checkout.Returns ☆ We stand behind every product we sell.☆ All of our brand new items come with a 30-Days money-back guarantee.☆ We define the item as defective only if it doesn't function as described.☆ It is the buyer's responsibility to understand the item description before offerding.☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.☆ Man-made damage by abuse or wrong operation is not covered by this warranty.☆ No product liability insurance is assumed.Contact Us ☆ We are always been trying to provide best service and reliable products for every customer.☆ If you are satisfed with the product you recieved, please have a good share.☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral response. Please feel free to contact with us, we will try our best to reslove any problem for you.

    DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home wheel spacers wheel hub bearing Complete Strut Brake rotor and pad◈2 Brake rotor◈4 Brake rotor◈4 Brake pads◈8 Brake pads◈2/4Brake rotor & 4/8pad Shocks & Struts suspension kit◈Control Arms◈Ball Joints◈Sway Bar◈Tie Rod End◈Suspension kit OtherHot Item For 2013-2016 Dodge Dart Front Complete Shock Strut Spring Assembly USD 121.30 For 2007-2011 Honda CR-V Rear Complete Shocks Struts w/ Coil Spring Assembly 2pc USD 94.66 2pcs Front or Rear Wheel Bearing Hubs for Chevy Equinox Impala GMC Terrain USD 68.18 4pcs 2\" 4x137 Wheel Spacers For Kawasaki Can-Am Maverick Commander Outlander USD 84.40 6x Front Lower Control Arms Ball Joints Sway Bars For Honda Civic Acura EL 01-05 USD 75.18 Excellent Delivery

    Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout UsNew List Item For 2008-2014 Toyota Avalon 3.5L Front & Rear Ceramic Brake Pads And Disc Rotors USD 180.80 Front and Rear Brake Discs Rotors Ceramic Pads For Ford Transit 2015 Drill Slot USD 217.08 Front Brake Pads And Rotors For Toyota Avalon 2008-2018 Camry 2007-2016 2017 FWD USD 100.79 Front and Rear Ceramic Brake Pads & Rotors Slot For Ford Escape 2013 - 2016 1.6L USD 209.73 Ceramic Pads and Brake Rotors Front Drill Slot For Ford Transit Connect 2015 USD 134.77 Front Rear Premium Ceramic Brake Pads Fits 1999-2004 Ford Mustang SVT Cobra 2WD

    Front Rear Premium Ceramic Brake Pads Fits 1999-2004 Ford Mustang SVT Cobra 2WD

    Essentially, hydraulic pressure forces a piston against the brake pads set inside the brake caliper. The caliper is free floating so that the pressure from the pads is evenly applied to each side of the brake rotor to slow or stop the wheel. The rotor is connected to and spins with the wheel and hub. The friction of repeated stopping will wear down the brake pads. The rotor wears as well, but the pads wear much faster.

    If you notice any squealing or scraping noises while driving your vehicle and applying your brakes, that is a good sign that your pads are worn and in need of replacement. You might also hear squealing or scraping sounds while NOT applying the brakes and when you apply the brake, the noises stop. That is also an indicator of worn or misaligned pads.
    Before starting, make sure your vehicle is parked on a flat level surface and you have your parking brake set. This is to make sure your vehicle doesn't roll off the jack which could be quite dangerous. If you do not have a floor jack or a breaker bar that fits your wheel's lug nuts, you can use the scissor jack and tire iron that came with your vehicle...they will work just fine for this. If you do use a breaker bar with a socket, make sure it is the correct size for the lug nuts otherwise you could round off the corners and make removal difficult. I do recommend buying a set of jack stands in either case because they are pretty cheap and provide much more safety for you when your vehicle is elevated off of the ground.

    Before jacking up the vehicle, you can use your tire iron or breaker bar to break loose the lug nuts on the wheel. This is much easier and safer while the car is firmly on the ground because it might require a decent amount of force to loosen them. If you have difficulty, try to position yourself to use your own body weight to help loosen the lug nuts.

    Using your floor jack or scissor jack, elevate the vehicle using the jack points defined in your vehicle manual. Once the wheel is clear of the ground, place your jack stand in position to support the vehicle. If you are using a hydraulic floor jack, you MUST use a jack stand as the floor jack will tend to "sink" over time. A scissor jack is less likely to move, but I still recommend jack stands...better safe than sorry.

    With the wheel safely off the ground, go ahead and remove the lug nuts. After they are removed, you can slide the wheel off of the hub and set it aside. You now have access to the rotor and brake caliper.

    Item SpecificsBrand :sinwonpartsManufacturer Part Number :sinwon807465Friction Material Bonding Type :BondedMaterial :CeramicGrade Description :PremiumType :Brake Pads SetBrake Pad Compound :Ceramic Low Dust FormulaManufacturer Warranty :1 YearBenifits :Comfortable and Quiet Green and DustlessShim Attachment Type :StakedCharacteristic :Anti Noise ShimInterchange Part Number :412,627 front and rear ceramic brake pads kitPlacement on Vehicle :Front,Rear,Left,RightPads Quality :8x Ceramic PadsOther Part Number :brake pad replacement,driver and passengerFitment Type :Direct ReplacementFront Brake Pad Internal Lenth Size :171.0 mmFront Brake Pad Internal High Size :51.56 mmFront Brake Pad Internal Thickness Size :15.0 mmRear Brake Pad Internal Lenth Size :202.0 mmRear Brake Pad Internal High Size :64.8 mmRear Brake Pad Internal Thickness Size :19.0 mmRear Brake Pad Internal Thickness Size :19.0 mm

    PaymentShippingReturnsContact Us ☆ We will only ship to the confirmed shipping address given with the payment.☆ Payments are expected within 7 days after the last winning sale is closed; Otherwise Unpaid Item Dispute will be filed with . ☆ All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.☆ We ship the package to your shipping address in . Please tell us your shipping address if it is different from the one in .☆ The tracking number will be given for the customer to check the shipping status online (registered or faster service only).☆ We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on during checkout. ☆ We stand behind every product we sell.☆ All of our brand new items come with a 30-Days money-back guarantee.☆ We define the item as defective only if it doesn't function as described.☆ It is the buyer's responsibility to understand the item description before offerding.☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.☆ Man-made damage by abuse or wrong operation is not covered by this warranty.☆ No product liability insurance is assumed. ☆ We are always been trying to provide best service and reliable products for every customer.☆ If you are satisfed with the product you recieved, please have a good share.☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral response. Please feel free to contact with us, we will try our best to reslove any problem for you.

    SINWONPARTS All rights reserved.




    Buy Now



  • Search for a different part:


    Related Cars:



    2011 Porsche 911 GT2 RS
    2011 Porsche 911 GT2 RS

    2011 Mercedes-Benz SLS AMG E-Cell
    2011 Mercedes-Benz SLS AMG E-Cell

    2006 Lexus IS350
    2006 Lexus IS350

    2005 Cadillac STS SAE 100
    2005 Cadillac STS SAE 100

    2010 Mercedes-Benz SLS AMG
    2010 Mercedes-Benz SLS AMG

    2009 Mercedes-Benz SL 65 AMG
    2009 Mercedes-Benz SL 65 AMG

    2004 Lexus LF-C Concept
    2004 Lexus LF-C Concept

    2008 AC_Schnitzer ACS3 Sport
    2008 AC_Schnitzer ACS3 Sport

    2001 Hamann BMW Z8
    2001 Hamann BMW Z8

    2007 Jaguar C-XF Concept
    2007 Jaguar C-XF Concept

    Related Items:

    WOLFBOX G930 10

    WOLFBOX G930 10" Touch Screen 4K Mirror Dash Cam Front and Rear With 32GB & GPS

    $89.99



    Front & Rear Brake Pads Fits Maserati Levante & Levante S 2017-2021 US picture

    Front & Rear Brake Pads Fits Maserati Levante & Levante S 2017-2021 US

    $117.00



    4PCS Front Rear Hydraulic Shock Struts FIT Toyota Land Cruiser J100 Lexus LX470 picture

    4PCS Front Rear Hydraulic Shock Struts FIT Toyota Land Cruiser J100 Lexus LX470

    $250.99




    Contact | Copyright Information | Privacy Policy & Terms of Use