Here are a few signs that your CV Jointneeds to be replaced:
1.Vibrations
2.Bouncy Driving
3.Tire Edge Grease
4.Turning Causes Loud Noises
5.Movement Causes Knocking Sounds
Fitment:
For Toyota Sequoia 2010-2012 V8 4.6L Front Left & Right 4WD
For Toyota Sequoia 2008-2009 V8 4.7L Front Left &Right4WD
For Toyota Sequoia 2008-2020 V8 5.7L Front Left &Right4WD
For Toyota Tundra 2007-2014 V6 4.0L Front Left &Right4WD
For Toyota Tundra 2010-2019 V8 4.6L Front Left &Right4WD
For Toyota Tundra 2007-2009 V8 4.7L FrontLeft &Right4WD
For Toyota Tundra 2007-2020 V8 5.7L Front Left &Right4WD
Features:
Brand new, easy to install, durable.
High-quality neoprene boots, stainless steel clamps, and heat-treated ball tracks
Precision-rolled splines and threads.
Specially-formulated moly grease.
Installation:
Professional installation is highly recommended!
The procedure for replacing a CV joint will vary, depending on the year, make, and model of the vehicle.
The following are general guidelines for educational purposes only. Consult your vehicle’s factory information for specific repair instructions and recommended safety procedures.
*Compare in relation to the original product before installation.
1.Lift the vehicle, unscrew, and remove the tire.
2. Unscrew and remove the triantebrachia. Hammer the outer CV joint and gently tap the joint until it is removed from the hub.
3. Remove the inner CV Joint from the differential mechanism. Place a small container below to preventing leaking.
4. Inspect the C-clip,Axles with VL construction of inner CV Joint require grease to be injected before installation of the inner CV Joint.
5. Insert the inner CV joint into the receiving end of the differential mechanism, and wiggle the inner CV joint until the c-clip snaps into the differential mechanism. Test if the inner joint is properly installed.
6. Insert the outer CV joint into the hub and swing arm. Tighten the nuts on the ball. Insert the split pin.Tighten the nut on the outer CV joint.Place the nut back on the outer CV joint into the check slot and tighten.
7.Place the tire back on the car and firmly tighten each nut.
Notes:
1.Please allow slight manual measurement deviation for the data.Instruction not included,professional installation is highly recommended.Due to the different display and different light, the picture may not reflect the actual color of the item.
2.Please check the model according to the auto parts list to avoid the model not fit after purchase!
3.All the items will be shipped to the buyer\'s address on the Paypal account, so please make sure that the address is correct.
4.Any damage during installation will not be refunded. Any modify action is excludes warranty.
5.If you have any questions, feel free to contact us, and we will reply you as soon as possible with the exception of weekends and holidays.
On Aug 7, 2026 at 10:24:27 PDT, seller added the following information:
