TheFunction of the fuel pump is to supply fuel at a certain pressure to the engine fuel injection system.However,the fuel pump have a limited life.If you notice any of the following signs with your car:(1).Engine Sputteringat High Speeds(2).Decreased Fuel Pressure(3).Losing Power when the Vehicle is under Stress(4).Inability to Not StartingThis may indicate that you need to replace the fuel pumpFuel Pump Replacement Guideline:Please Notethe following before replacing the fuel pump: Electrical Fuel Pump Module For Nissan Sentra Tsuru 1.6L 2.0L 1995-1999
TheFunction of the fuel pump is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following signs with your car:
(1).Engine Sputteringat High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline:
Please Notethe following before replacing the fuel pump:
1.Ensure that you are in a wellventilated and level work area.
2.Use approved safety glasses or goggles when working on any motor vehicle.
3.The gasoline is sucked out of the tank and stored in a container dedicated to the ground (negative) cable of the battery and ensure that it does not accidentally spark while working.
Picture(B)
Locate and removegas tank filler neck mounting bolts or remove the filler tube from the tank. This will aid the fuel removal especially if you had problems accessing through the filler the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness. If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector. Inspect electrical connector for burns or heated spots and replace if damaged. A burned connector can cause a pump to fail will be fuel vapor lines as part of theEVAPsystem these will need to be removed or and release tank holder supports, there are two in most cases. Remove the mounting bolts at this point the tank will become loose but may not come the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank.
Picture(G)
Remove the tank, this will expose the fuel pump retainer ring. Use an aerosol cleaner to remove dirt and debris from the area. This will keep the inside of the fuel tank clean when performing the fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit. Use a hammer and punch to remove the ring counterclockwise.
Picture(I)
Remove the fuel pump which will be attached to the mounting plate or positioned down inside the tank held by plastic retainer clips.
Picture(J)
Remove the fuel pump from the tank.
Item SpecificsType Fuel PumpDrive Type ElectricalManufacturer Part Number KING13348105FBItems Included Mounting HardwareManufacturer Warranty 1 YearPerformance Part NoUniversal Fitment NoVintage Car Part NoBrand Fuel_KingpartsSuperseded Part Number Part Number 2506017042,E9558M,69560OE/OEM Part Number 69613,2506017042
Payment
We only accept payment through PayPal.
Shipping
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
Returns
All of our brand new items come with a 60-Days money-back guarantee.
Contact Us
Any question, please contact us by email on working days.
Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Best Sales For Dodge Ram 1500 2500 5.2L 5.9L 1996-1997 Fuel Pump w/Sending Unit E7093M USD 47.99 Fit For 2003 2004 Ford Expedition V8 5.4L Fuel Pump Assembly E2360M USD 37.99 For 2009-2010 Ford F-150 5.4L 4.6L 2011-2014 F-150 3.7L 5.0L 6.2L Fuel Pump USD 46.49 For Chevy C1500 C2500 C3500 K1500 K2500 K3500 GMC C1500 C2500 C3500 Fuel Pump USD 36.69 For Ford F-150 2004-2008 V8 4.6L 5.4L 2005-2008 V6 4.2L Fuel Pump E2434M USD 38.49 Newly Listed For 2010 Ford Explorer 4.6L Mercury Mountaineer Fuel Pump Moudle Assembly USD 49.99 For Ford Crown Victoria Lincoln Town Car Mercury Grand Marquis 4.6L Fuel Pump USD 50.45 For 1997 Chevrolet Express 3500 GMC Savana 3500 V8 5.7L 7.4L Fuel Pump E3995M USD 31.19 For Mariner Marine OutBoard Engines 20-60 HP 4Stroke Fuel Pump 892267A51 USD 10.49 For Chevrolet 396 402 454 Muscle Car Series Big Block Mechanical Fuel Pump M6628 USD 26.99 Terms & ContactPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Electrical Fuel Pump Module For Nissan Sentra Tsuru 1.6L 2.0L 1995-1999
TheFunction of the fuel pump is to supply fuel at a certain pressure to the engine fuel injection system.
However,the fuel pump have a limited life.If you notice any of the following signs with your car:
(1).Engine Sputteringat High Speeds
(2).Decreased Fuel Pressure
(3).Losing Power when the Vehicle is under Stress
(4).Inability to Not Starting
This may indicate that you need to replace the fuel pump
Fuel Pump Replacement Guideline:
Please Notethe following before replacing the fuel pump:
1.Ensure that you are in a wellventilated and level work area.
2.Use approved safety glasses or goggles when working on any motor vehicle.
3.The gasoline is sucked out of the tank and stored in a container dedicated to the ground (negative) cable of the battery and ensure that it does not accidentally spark while working.
Picture(B)
Locate and removegas tank filler neck mounting bolts or remove the filler tube from the tank. This will aid the fuel removal especially if you had problems accessing through the filler the electrical connector for the fuel pump and fuel level sender which will be in the same wiring harness. If access if difficult or you can't see them wait until the tank is lowered slightly to undo the connector. Inspect electrical connector for burns or heated spots and replace if damaged. A burned connector can cause a pump to fail will be fuel vapor lines as part of theEVAPsystem these will need to be removed or and release tank holder supports, there are two in most cases. Remove the mounting bolts at this point the tank will become loose but may not come the tank and release top mounted fuel lines or electrical connectors if any. Continue to remove the tank.
Picture(G)
Remove the tank, this will expose the fuel pump retainer ring. Use an aerosol cleaner to remove dirt and debris from the area. This will keep the inside of the fuel tank clean when performing the fuel pump mounting bolts or retainer ring to access the fuel pump module and remove the unit. Use a hammer and punch to remove the ring counterclockwise.
Picture(I)
Remove the fuel pump which will be attached to the mounting plate or positioned down inside the tank held by plastic retainer clips.
Picture(J)
Remove the fuel pump from the tank.
Item SpecificsType :Fuel PumpDrive Type :ElectricalManufacturer Part Number :KING13348105FBItems Included :Mounting HardwareManufacturer Warranty :1 YearPerformance Part :NoUniversal Fitment :NoVintage Car Part :NoBrand :Fuel_KingpartsSuperseded Part Number Part Number :2506017042,E9558M,69560OE/OEM Part Number :69613,2506017042
PaymentShippingReturnsContact UsWarning
We only accept payment through PayPal.
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
All of our brand new items come with a 60-Days money-back guarantee.
Any question, please contact us by email on working days.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
All rights reserved.
