Product Description 🛑 STOP! READ THIS BEFORE YOU BUY 🛑(To avoid returns, please take 1 minute to verify your engine)
✅ YES - THIS PART FITS:Ford Inline 6 Engines: 200 ci & 250 ci (All Years).Late Model 170 ci: Produced after mid-1965.170 ci: Mid-1965 & Up (Must confirm shaft size)200 ci: 1964 - 1983250 ci: 1967 - 1983Commonly found in: Mustang, Falcon, Comet, Maverick, Ranchero, Fairlane, F-Series Trucks, Econoline Vans.🚗 COMPATIBILITY GUIDE Fits Ford Inline 6 Engines (With 5/16" Hex Shaft):KEY REQUIREMENT: Your engine MUST have a 5/16" (8mm) Hex Oil Pump Shaft.
❌ NO - THIS PART DOES NOT FIT:Ford 300 ci (4.9L): This is the most common mistake. DO NOT BUY if you have a 300 engine.Early 144 ci & 170 ci: Produced between 1960 and mid-1964.Small Shafts: Any engine with a 1/4" (6mm) oil pump shaft.
📦 PACKAGE INCLUDES (Complete Kit)1 x HEI Distributor (With Built-in 65,000V High Output Coil)1 x Set of Blue Spark Plug Wires (8mm High Performance for 6-Cyl)1 x HEI Pigtail Harness (Power & Tachometer Connectors)(Note: This is a complete "Ready-to-Run" kit with wires included)
💪 KEY FEATURES & BENEFITSAll-In-One Solution: Comes with a built-in 65,000 Volt coil and module. No external coil or messy wiring needed.Easy 1-Wire Hookup: Simply connect a 12V switched power source to the "BAT" terminal, and you're ready to run!reliable spark delivery up to 7500 RPM.
⚠️ INSTALLATION TIPS (For Best Results)Check Clearance: The HEI cap is large (approx. 5.5 inches). Please verify you have enough clearance near your air cleaner and thermostat housing.Use 12V Power: You MUST bypass the factory resistor wire. This unit requires a full 12V power source to create a strong spark.Spark Plug Gap: We recommend increasing your spark plug gap to 0.045" - 0.050" to take full advantage of the HEI system's power.
powered by
