Cold Air Intake System & Heat Shield For 2014-2016 BMW 420i/ix I4-2.0L(t) F32 F33Autopartszone IntroductionWe are committed to presenting high-quality products to buyers and selling them at the most favorable price. Excellent after-sales service will escort your purchase.Item Description⭐Cold Air Intake Kits for BMW F30 228i 320i 328i 420i 428i 2.0T N20 N26 2012-2016⭐1 Each intake kit comes with a huge, highly-efficient air filter which results in better performance and better protection for your engine.
2, Most new design are now dry filter instead of oil filter. Our filter do not require oil, it is reusable and washable. You can wash it with soap and water, rinse it until it is all dry up and use it again. We recommend you to check every 5,000 miles to see if it needs to be wash / clean.
3, Silicone is a premium rubber which seals better and lasts longer. The air filter, couplers and tube seals in our intake kits are made from our premium silicone rubber. This means they won't crack, has exceptional tear strength, and can handle temperatures as high as 400F. Also, with a high friction surface and no oily residue, our silicone filters and couplers won’t slide off the tube.
4,Simple to install Direct replacement, easy install and no special tool requirement.
5, Air intake systems kit are designed to greatly reduce intake restriction as they allow for smoother and straighten air flow. This kit replaces your vehicle's restrictive factory air filter and intake housing. Up to 100,000 miles without filter cleaning.
6, Our cold air intake kit effectively increases horsepower by 5-10%, torque by 6-8%, and produces attractive intake noise. Advanced oil-filled synthetic filter design helps protect your engine from damaging contaminants.Features:100% Brand new, never been used
It's the ultimate performance Cold Air Intake Kit The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output
The kit includes a steel heat shield that features a durable carbon-black powder coating for long lasting good looks
It can increase 8-10% of Horsepower and 6-8% of torque
Easy to install and easy to fit with simple tools
Professional installation highly Brand New
Full New:Never Used Or Installed
Type: Cold Air Intake Pipe System Kit
Material: High Quality of Aluminum
Size: 3.5'' Black Intake Pipe, 3.5'' Black Air Dry Filter
Finish:Aluminum Piping with Black Powder Coating.
Color: Black Pipe + Black Heat Shield + Black Filter
Installation steps:Step 1 - Make sure your engine is cool to the touch.
Step 2 - Disconnect your battery cable from the negative terminal.
Step 3 - Remove your old air intake.
Step 4 - Attach the silicone coupling that came with the air intake kit to the throttle body.
Step 5 - Secure the coupling by tightening a hose clamp at the end.
Step 6 - Place another hose clamp on the front of the coupling, but don’t tighten it just yet.
Step 7 - Slide the intake tube into the silicone coupling, and ensure that your intake pipe is running from the throttle bay away from the engine bay.
Step 8 - Tighten the silicone coupling and secure all brackets on the tube.
Step 9 - Plug the mass air flow sensor into the new cold air intake system.
Step 10 - Reconnect the battery.Enjoy the new power boosts immediately!Vehicle CompatibleFor 2013-2016 BMW 228i 320i 328i 420i 428i 2.0T N20 N26 Turbo.
For 2014-2016 BMW 220i/ix I4-2.0L(t) F22.(DO NOT have Vacuum Port)
For 2014-2016 BMW 228i/ix I4-2.0L(t) F22.(DO NOT have Vacuum Port)
For 2013-2016 BMW 320i/ix I4-2.0L(t) F30/31/34.(DO NOT have Vacuum Port)
For 2012-2016 BMW 328i/ix I4-2.0L(t) F30/31/34.
For 2014-2016 BMW 420i/ix I4-2.0L(t) F32/33.(DO NOT have Vacuum Port)
For 2014-2016 BMW 428i/ix I4-2.0L(t) F32/33/36.(DO NOT have Vacuum Port)
Vehicle compatibility charts are for REFERENCE ONLY. Check product type and size to match your needs.
Note: This intake pipe DO NOT have a vacuum port for vacuum pipe. Please make sure before purchase.Kindly Note: Not suitable for modified vehicles !!!Package Included1x Air Filter;
2x Heat Shield;
2x Intake Pipe（3.5" Inch）
1x Silicone Boot;
2x Clamp (78-101mm);
2x Decorative Strip;
1x Screws & Gaskets & Nuts Kit.
All accessories on the picture are included.
Professional installation is highly recommended.
Instructions are not included.
FAQ:
I purchased by mistake, how do I cancel the order?
Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us.
I received your item but it does not fit or is defective
Please contact us so we can assist you on the matter.
Buy with confidence
Our quality is based on meeting the requirements of the manufacturer and improvement them in design problems manufacture.
NOTE:(1)It would be highly appreciated if you might contact us first once you have any problems concerning the items. And you can expect all the issues would be resolved ASAP!(2)Please let us know before you send us the neutral/negative response that wont help to finish the issues. And I will definitely try my best to provide the best solutions which would meet our satisfactory!
(3)According to the distance of the receipt address items would be sent from CA or NJPaymentDelivery detailsTerms of salesAbout usContact usPayment1. Payment must be received within 7 days after winning the item，UPI (Unpaid Item Case) will be filed automatically if buyers fail to make the payment in 7 days after item ends.2. If you have difficulty paying for the item, please email us to cancel the orderDelivery details1. Items will be sent out in 48 hours on payment received from Monday to Friday. Orders during weekends and holidays will be posted in the following working day.2. Please make sure your shipping address and the order information is correct before placing an order. We will not be responsible for item loss due to wrong or unknown address.3. Products will be shipped from CA/GA/NJ via USPS/UPS/Fedex/DHL. Shipping time is usually 2-7 business days (except Saturday and Sunday.) If you need the item urgently, please contact us for details before you buy.
4.Shipping Note:We use multiple warehouses, and will select the nearest warehouse for delivery, according to your order address and our inventory, Thank you for your cooperation :)
Terms of sales1. We accept 30 days return/refund guarantee2. If the item you received is faulty, damaged or incorrect, or any further problems, please contact our customer service on within 30 days from item received.3. For damaged items on arrival, please contact us immediately, sending us an email with a photo is preferred. We will offer solutions to such cases. Full refund or replacement will be guaranteed.About us
Welcome to our Autopartszone !
We are specialized in auto accessories for more than 12 years and we have been exporting all kinds of items concerning the auto-parts that come with high quality & best price & excellent after-sales service!
Thank you for shppping at our store.
Contact us1. Please leave five stars positive response positive comment andFive-Stars.
2. Please feel free to contact us first before you left us a negative/neutral response and we are pleased to solve the problems you met.
3. Please contact us first if you have any questions such as product damaged, wrong item sent and item does not work. All those issues would be solved immediately with your satisfactory!BrandAutopartszoneTypeCool Air Intake kitsMaterialT-6061 Aircraft Grade Aluminum,ColorBlack+Red FilterVehicle Compatibility 1For 2013-2016 BMW 228i 320i 328i 420i 428i 2.0T N20 N26 TurboFeaturesHeat-Resistant, DurableManufacturer Part NumberDoes not applyVintage PartYesPackage Includes 1:Aluminum Alloy airbox with coverPackage Includes 2:Enlarged silicone hose with carbon fiber connectorPackage Includes 3:Armaspeed high-flow air filterPackage Includes 4:Metal parts ( As picture shown )Interchange Part NumberDoes not applyManufacturer Warranty1 YearOE/OEM Part NumberCool Air Intake kitsUniversal FitmentYesPerformance PartDirect Replacement
