Untitled Document
Action Clutch single disc clutch kits contain a range of Street to High Performance clutch systems which out perform the competition. All stage kits are built using American materials which are all locally sourced here in Los Angeles as we have been doing for 60 years. Each stage kit has its own advantages as well as its own formulated friction materials. As you move up in our staged kits, the clamping force of the pressure plate increases in order to provide more torque capacity, this is achieved all while maintaining a comfortable pedal feel.
All of our staged kits come complete with the clutch disc, pressure plate, throwout / release bearing, pilot bearing / bushing (when applicable), and alignment tool. Components may be purchased individually as well.
STAGE 5 (2MS) 200% INCREASED HOLDING CAPACITY
RACE APPLICATIONS / HEAVY TRACK USE
(HEAVY-DUTY STREET USE DRAG / ROAD / DRIFT RACING)
The 2MS Stage 5 Kit uses an extremely durable, High Performance MIBA Sprung Ceramic Disc. This kit features a dual clamp load heavy-duty pressure plate with reinforced drive straps for increased durability. Action Clutch\'s dual clamp load kit offers nearly double the clamping force of their stage 3 and 4 kits which increases the TQ capacity. It is available in a 4 and 6 MIBA Ceramic puck configuration with the 4 puck being the more aggressive of the two. This MIBA Sprung Ceramic kit is engineered for low/mild horsepower vehicles. The Stage 5 MIBA Sprung Ceramic kit creates quick engagement as well as clutch chatter, which should be minimal once proper break-in is completed. Like all of their sprung kits, the Stage 5 kit features fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine as seen with competitors. After each kit is assembled, it goes through multiple quality checks before it is signed off by one of their lead engineers (50+ years combined experience).
Break-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.
*Increase in holding capacity is rated in Crank Torque, not Wheel Torque.
Pressure Plate Features
- Ductile Iron Friction plate
- Dual Clamp Load HD Pressure Plate
- Reinforced heavy duty drive straps
- 4 stage Heat treated diaphragm spring
- American grade rivets
- 100% dynamically spin balanced
Clutch Disc Features
- MIBA Ceramic Sprung 6 Puck Clutch Disc
- Patented, Fully Enclosed, Spring Retainers
- Sprung Hub For Easy Engagement
- American Grade Rivets
SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
Actual product may differ from photo* ITEM DESCRIPTION ITEM DESCRIPTION
- Clutch Size: (9-1/2\" x 1-1/8\" x 10 spline)
- Torque Capacity: 452 lb-ft
- HP Rating: 505 HP
- Lightened Flywheel: (14.98 lbs)
What\'s included
- Lightened Flywheel
- Dual Clamp Load HD Pressure Plate
- MIBA Ceramic Sprung 6 Puck Clutch Disc
- Premium Throwout Bearing
- Premium Pilot Bearing
- Clutch Alignment Tool
FITMENT FITMENT
- Fits 1992 - 1995 BMW 325i, 325is (2.5L 6cyl M50; E36)
- Fits 1996 - 1998 BMW 328i (2.8L 6cyl M52; fits 4 door sedan only; E36)
- Fits 1997 - 1998 BMW 528i (2.8L 6cyl M52; E39)
- Fits 1998 - 2002 BMW Z3 M coupe, M Roadster (3.2L 6cyl S52, S54; E36)
- Fits 1997 - 1998 BMW Z3 (2.8L 6cyl M52; E36)
- Fits 1995 - 1999 BMW M3 (3.0L 6cyl S50; 3.2L 6cyl S52; E36)
- Fits 1991 - 1995 BMW 525i (2.5L 6cyl M50; E34)
- Fits 1996 - 1999 BMW 328is, 328i convertible (2.8L 6cyl M52; E36)
- Fits 1994 - 1995 BMW 325i (2.5L 6cyl M50; fits convertible only; E36)
- Fits 1998 - 1999 BMW 323i, 323is (2.5L 6cyl M52; fits convertible and 2 door coupe only; E36)
Note: This conversion kit for the clutch and flywheel must be employed as a complete set, without reusing any pre-existing components. SHIPPING SHIPPING
All packages are sent via USPS or UPS
However, once the package gets picked up from our location, we have NO control over how long the carrier takes to deliver the item, at times the terminals can be congested and take up 1-2 day delays.
INTERNATIONAL: All INTL packages are shipped using USPS, all import and duty fee\'s are buyers responsibility to pay. Express shipping is available upon request
RETURNS RETURNS
We offer a 30 Day Return Policy, Buyer pays for return shipping.
WARRANTY WARRANTY
Action Clutch warrants this product against defects in material or workmanship as follows:
Action Clutch will replace at no charge for parts only that proves defective because of improper workmanship. If Action Clutch is unable to provide a replacement and repair is not practical or cannot be made in a timely fashion, Action Clutch may elect to refund the purchase price in exchange for the return of the product.
Action Clutch offers a 90-day warranty from the original date of purchase. Action Clutch also offers a 30-day return policy with a 20% restocking fee.
Action Clutches warranty does not cover any problem that is caused by:
(1) Conditions, malfunctions or damage not resulting from defects in material or workmanship. (2) Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration. (3) Accessories, connected materials and products, or related products not manufactured by Action Clutch. (4) Damaged input Shaft causing HUB to strip (5) Failure to resurface the flywheel will invalidate Warranty.
