2017-2026 Ford F250 F350 F450 F550 Super Duty Drop Windshield Visor Fiberglass For Sale - New and Used

2017-2026 FORD SUPER DUTY DROP WINDSHIELD VISORF-250 • F-350 • F-450 • F-550MADE IN AMERICA • HAND-LAID FIBERGLASSIMPORTANT — PLEASE READ BEFORE PURCHASINGThis is a hand-laid fiberglass aftermarket body component. Professional fiberglass/body-shop preparation and installation are recommended.Installation requires test fitting, possible minor trimming, fiberglass preparation, painting, drilling of the A-pillars and installation of Betaseal adhesive.If you are looking for an OEM-style plastic part that arrives ready to paint and installs without preparation or drilling, this is not that product.THE PRODUCT

Give your 2017-2026 Ford Super Duty a substantially more aggressive custom appearance with this approximately 10-inch-tall drop windshield visor.

The visor extends approximately 7-8 inches down the windshield and is constructed from hand-laid fiberglass.It is designed as a custom aftermarket body component and should be prepared and installed similarly to other fiberglass automotive body panels.

WHY THIS VISOR?

• Made in America
• Hand-laid fiberglass construction
• Approximately 10" tall
• Approximately 7-8" windshield drop
• Aggressive custom appearance
• Integrated mounting brackets
• Designed specifically for the Ford Super Duty application
• Betaseal adhesive included
• Installation hardware included
• Detailed installation instructions included

WHAT'S INCLUDED

• Fiberglass Drop Windshield Visor
• Integrated mounting brackets
• 8 self-tapping mounting screws
• Betaseal urethane adhesive
• Installation instructions

Eight screws are supplied so the installer has flexibility during installation.The installer can use either 3 or 4 screws per side depending on the specific installation and Ford F-250 Super Duty

2017-2026 Ford F-350 Super Duty

2017-2026 Ford F-450 Super Duty

2017-2026 Ford F-550 Super Duty

FIBERGLASS PREPARATION — IMPORTANT

This is a hand-laid fiberglass component, not an injection-molded OEM plastic part.Because fiberglass is hand-produced, minor surface imperfections and variations can occur.

Normal fiberglass bodywork preparation should be expected before painting. This may include:

• Sanding the gel coat
• Finishing minor surface imperfections
• Minor trimming if necessary for fitment
• Priming
• Final sanding and body-shop preparation is recommended.For the best finished result, use a professional who has experience preparing and finishing fiberglass automotive components.
  TEST FIT BEFORE PAINTINGDO NOT PAINT THE VISOR BEFORE COMPLETING THE TEST FIT.

  Test fitting establishes:

  • Overall fitment
  • Any minor trimming required for fitment
  • Windshield clearance
  • Windshield wiper clearance

  Once the visor is painted, avoid repeatedly moving it around the vehicle because the finished surface can be scratched.

  INSTALLATION REQUIREMENTS

  Professional installation is recommended.Installation requires working with a fiberglass body component and drilling the A-pillars.

  1. Test fit the visor and establish the desired position and alignment.
  2. Check windshield wiper clearance. Cycle the wipers and make sure they do not contact the underside of the visor.
  3. Mark the mounting locations on the A-pillars after proper positioning has been established.
  4. Drill the A-pillars. The supplied self-tapping screws are used for the A-pillar mounting points.
  5. Remove the visor and complete fiberglass preparation, priming and painting.
  6. Apply the supplied Betaseal to the three center standoffs that contact the windshield.
  7. Reinstall the visor and secure the A-pillar mounting points.
  8. Allow the installation to settle for 24 hours before driving.
  WHO SHOULD INSTALL THIS?

  This product is best suited for:

  • Professional body shops
  • Installers experienced with fiberglass bodywork
  • Experienced automotive enthusiasts comfortable with fiberglass preparation and installation

  Not experienced with fiberglass? We strongly recommend arranging installation with a professional body shop before purchasing.Not every body shop has experience preparing and installing fiberglass components.

  BEFORE YOU ORDER

  Please understand the following before purchasing:

  • This is a hand-laid fiberglass component.
  • It is not a ready-to-paint OEM plastic part.
  • Minor surface finishing may be required.
  • Minor trimming may be necessary during test fitting.
  • Drilling into the A-pillars is required.
  • Painting is required before final installation.
  • Professional fiberglass/bodywork experience is recommended.
  • The visor should be test fitted before painting.
  • Allow 24 hours after installation before driving.

  We want you to know exactly what is involved before you purchase so there are no surprises during installation.

  INSTALLATION INSTRUCTIONS

  Review the installation instructions before purchasing.Understanding the preparation and installation requirements beforehand will help ensure the best possible result.

  VIEW / DOWNLOAD THE COMPLETE DROP VISOR INSTALLATION GUIDE (PDF)

  QUESTIONS?

  Have questions about fitment, preparation or installation? Please contact us before purchasing.We are happy to help make sure this product is appropriate for your project.

  STRUCK AUTOS
  Specialty Automotive Products
  Made in America
  

  ---