Fits 2003-2009 Nissan 350Z, 2003-2006 Infiniti G35 RWD Sedan and 03-07 G35 Coupe.
ZSpeed Performance Version 2 Aluminum Engine Under-shrouds! These under shrouds were developed to protect your critical engine parts under the car and also because the cheap plastic OEM shield deteriorates over time and usually ends up on the highway behind you somewhere.
Version 2 is the latest creation from ZSpeed Performance!
V2 features added vents to help hot air escape from the engine compartment and more clearance for deeper oil pans and bigger sway bars.
Without the shield in place the air that comes in through your fascia should be directed into you radiator and instead will just take the path of least resistance and exit under the car instead of cooling off your radiator. Just like the upper radiator air guides keep air going through the radiator, The bottom is even more important to have in place as it is much easier for air to escape there.
The under shrouds will fit all 2003-2008 350Z\'s, 2003-2006 G35 RWD Sedan with stock front fascias and should fit any fascia that the OEM under shroud still bolts to.
The ZSpeed Performance under shroud will help give the lower front fascia much more rigidity also, As you probably know, running without the shield in place at high speeds can do serious damage to the front fascia as it will droop down and can rip apart.
With the integrated oil change access door all you have to do is remove 2 bolts and you have ample room to get to the oil filter and drain plug. Weight on the entire piece is 4.5lbs, The plastic OEM shield for reference weighs in at a bit over 3lbs. Very lightweight and much more protection!
Perfect Fitment
Correct Design
Maximum Clearance under car
Easy oil change, Just remove 2 bolts on the oil change access door to change your oil and Filter!
Cad designed and laser cut to perfection!
Not copied, This is the ORIGINAL MADE IN THE USA and if you look at the pictures you can clearly see this is a much better looking/fitting product! Compare pics closely
People that copy products ruins innovation for new and very cool products! Support the original!
Comes with ALL NEW MOUNTING HARDWARE, Everything you need to remount the shield to the car.
Shields are shipped with protective laser film on the showing side of the shield, This needs to be removed before installation. Somevery minor scratches may be present on the unprotected side (facing engine once installed) from forming, These are normal in the manufacturing process and do not effect the performance of the shield.
