- About
- Store
- Contact
- Shipping
- response
VSaero FRP GT3 RS Front Bumper 2pc 997 for 911 Porsche 05-12 vsaero_108430 Note: This bumper is designed to use the early model 997.1 2005-2008 turn signal lights if you are installing this on a later model 2009-2011 997.2 you must use the early model turn signal lights from the 2005-2008. Upper grille opening near the hood is flush as you can see in the pictures. Description / Notes:
Part #: vsaero_108430
Make: Porsche
Model: 911
Material: FRP
Condition: New
Product Notes :
VSaero FRP GT3 RS Front Bumper 2pc 997 for 911 Porsche 05-12 vsaero_108430
Description :
This is a GT3 RS Front Bumper 2pc manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. When installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape are not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment.
New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Disclaimer
All front bumpers, front lips, and other front add-ons offered by VSAero are designed as aftermarket accessories intended exclusively for off-road and show use. VSAero assumes no responsibility for any damage or injury resulting from the use of these products. Please note that due to the nature of fiberglass and the manufacturing processes involved, VSAero front bumpers and add-ons are not \"\"direct bolt-on\"\" parts. They may require additional preparation, such as sanding, shaving, filling gaps, or other custom bodywork to ensure a proper fit. Installation may also necessitate modifications to vehicle components, including the removal of reinforcement bars, original bumpers, turn signals, and other safety features.
While front lips and other front add-ons generally do not replace the entire bumper, these front lip spoilers and bumper add-ons may still require modifications and careful fitting to attach properly. Front lip spoilers and bumper add-ons often overlap the factory bumper or attach beneath it, offering a more straightforward installation process than full bumper replacements, but professional installation is still strongly recommended for safety and fitment.
VSAero advises that installation be performed by a custom shop experienced in handling fiberglass body kits, as traditional auto shops may lack the expertise needed for proper installation.
VSAero products, including front bumpers, lips, and add-ons, are intended strictly for off-road and show applications. Due to stringent Department of Transportation (DOT) regulations, many of these products are not street legal. VSAero does not endorse or recommend using these products on public roads or highways.
Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description.
Will it fit my vehicle?
- Pay close attention to the make, model and year, but also the trim level.
- The parts finder may be inaccurate, go by our listing title and description.
- Verify with us if you are unsure
US Customers
- PayPal is accepted
- Visa Master Discover also accepted
International Customers
- Please contact us before purchasing
- Payment types vary
Our goal is to earn 5 star rating with every purchase!
Tell us how we can make your exerience a 5-star one!
All Copyright © Tilbury Enterprises LLC
