T04 11PC TURBO KIT+CAST MANIFOLD+INTERCOOLER FOR 89-94 NISSAN 240SX S13 S14 KA24 For Sale - New and Used
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
T04 11PC TURBO KIT+CAST MANIFOLD+INTERCOOLER FOR 89-94 NISSAN 240SX S13 S14 KA24: $568.86
Welcome to Speed Daddy - Store Home
- About Us
- response
- Add To Favorites
- New Arrivals
- Ending Soon
- Contact Us
T04 11PC TURBO KIT+CAST MANIFOLD+INTERCOOLER FOR 89-94 NISSAN 240SX S13 S14 KA24 Similar Product Options Product Description High Compression/ Boosting T04E TurbochargerThe objective of a turbocharger is to improve the engine\'s volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.
Specifics and Benefits:
- Capable of Boosting Horse Power up to 300+ BHP
- High Quality Material, Cast Housing with Durable Steel Exhaust (Turbo Manifold) Flange:Standard T3/ T4 4-BoltExhaust (Downpipe) Flange:Standard T3 5-BoltIntake Inlet/ Outlet:3.00\"/ Performance Cast Iron Exhaust Tubro Manifold
The heart of any turbo system is the manifold and the turbocharger. These form the basis where the rest of the turbo system is built around. There is no match for durability and strength for cast turbo manifolds. Cast manifolds are more durable over long periods of constant heat cycles like daily driving. Cast turbo manifolds offer short runners resulting in quicker spooling for whatever turbocharger is being used. The shorter runners of the cast manifolds take up little space so that it is possible to keep accessory components, such as air conditioning and power steering, of your engine intact. Specifics and Benefits:
- High Performance Turbo Racing Design
- Made of High Quality Cast Iron Material for Strength and Durability
- Computerized Mandrel-Bended to Maximize Air Flow Smoothness
- TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
- Increase Engine Exhaust Output and Efficiency
- 38mm/ 35mm External Wastegate Port and Flange Included
- Standard T3/ T4 Turbo Flange Configuration Outlet
Universal 35mm/ 38mm Wastegate with Spring Wastegates provide a means to control the boost pressure of the turbo charged engine. Wastegates work to bypass exhaust flow from the turbine wheel. Bypassing the exhaust flow reduces the power driving the turbine wheel to match the power required for a given boost level. Similar to the BOV, the Wastegates uses boost pressure and spring force to regulate the flow bypassing the turbine. Wastegates are bolted to exhaust manifold or header. The advantage of external Wastegates is that the bypassed flow can be reintroduced into the exhaust stream further downstream of the turbine. This tends to improve the turbines performance. Specifics and Benefits:
- High Strength Cast Steel Body with Steel Head
- Comes with 8-PSI Spring Installed
Lightweight Aluminum Bar and Plate Front-Mount Intercooler When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine. Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present. Specifics and Benefits:
- High Performance Bar and Plate Turbo Racing Design
- Made of High Quality T-6061 Aluminum Durable Material
- Helps Reducing Engine Inlet Temperature
- Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
- Intercooler size: 27.00\" (L) X 5.50\" (H) X 2.50\"(W)
- Core size: 22.00\" (L) X 5.50\" (H) X 2.50\"(W)
- Inlet/ Outlet: 2.25\"/ 2.25
Universal Aluminum Intercooler PipingSpecifics and Benefits: - Made of High Quality T-6061 Lightweight Aluminum Piping
- 2.50\" Piping Diameter
- Increase 65% Air Flow Comparing with other Standard Piping
Universal 35mm/ 38mm Wastegate with Spring Specifics and Benefits: - High Strength Cast Steel Body with Steel Head
- Comes with 8-PSI Spring Installed
Type-S Adjustable Aluminum Billet Blow Off Valve BOVSpecifics and Benefits: - Billet Aluminum Body
- 8 Discharge Ports That Draw In Surrounding Air and Release a Unique Discharge Sound
- 40mm, Hard-Anodized Valve for Increased Airflow
- Dual Spring System Promoted Response and Allows for High Boost Pressures
- Holds Up to 30 PSI Boost Pressure
- Aggressive JDM Racing Discharge Sound
Aluminum 2.5 Flange PipeSpecifics and Benefits: - Made of High Quality T-6061 Aluminum, Lightweight, Heat-Persistent Design
- 2.5\" Pipe Size
30 PSI Turbo Boost ControllerSpecifics and Benefits: - CNC Machined Aluminum Body
- 1-30 PSI Adjustable
Stainless Steel Braided Oil Feed LineSpecifics and Benefits: - Made of High Quality Stainless Steel Hose
- 10AN Fittings Anodized Ends
- Inner Diameter: 0.25\"
- Length: 36.00\"
- 1/8 NPT Fittings Natural Polish Finish
High Tolerance Manifold WrapSpecifics and Benefits: - Made of High Quality Synthetic Fabric Material
- Tested to Tolerate Extreme Heat and Wearing Corrosions
T3/ T4 5-Bolt Mild Stainless Steel Downpipe FlangeSpecifics and Benefits: - Made of High Quality T-304 Mild Steel Durable Material
- Construction Prevents Warping Due To High Heat
- 5-Bolt Design Shape
- 0.50 Thickness Flange
- Fits T3/ T4 2.5\" Diameter 5-Bolt Turbo/ Turbocharger Flange
- Included for DIY Welding Need
100% Brand New Professional Installation is Highly Recommended (No Instruction Included)
Package Includes: - 1 X T04E Turbocharger
- 1 X Cast Iron Turbo Manifold
- 1 X External Cast Steel Wastegate WG
- 1 X Type-S Blow Off Valve Kit
- 1 X Flange Pipe
- 1 X Adjustable Boost Controller
- 1 X Manifold Wrap
- 1 X Braided Oil Feed Line
- 1 X Lightweight Aluminum Intercooler
- 1 X Set of Aluminum Piping
8-Piece Piping Set Includes: - 2 X 180 Degree U-Pipe
- 2 X 90 Degree Pipe
- 2 X 45 Degree Pipe
- 2 X Straight Pipe
- 8 X Silicone Hoses
- 16 X Bolt-Tight Clamps
- 1 X T3/ T4 5-Bolt Flange
- Hardware, such as Gasket(s) and Bolt(s), if Shown in the Picture Above
Compatible with: - 91-98 Nissan 240SX S13/ S14 Silvia
- 95-98 Nissan Xterra
- 98-04 Nissan Frontier
- 93-01 Nissan Altima (ALL Models Above with a 2.4L I4 DOHC Engine ONLY)
- Please Check Compatibilities for Exact Years and Models
Modification might be Required for Some Vehicles
Specifics and Features: Includes: Notes: Compatible with: 91-98 Nissan 240SX S13/ S14 Silvia00-04 Nissan Xterra98-08 Nissan Frontier93-01 Nissan AltimaALL Models Above with a 2.4L I4 DOHC Engine ONLYModification might be Required for Some Vehicles100% Brand NewProfessional Installation is Highly RecommendedInstallation Instruction is NOT Included Product Video Presentation Video will open in a new window [isdntekvideo] Video will open in a new window [isdntekvideo] Video will open in a new window [isdntekvideo] Video will open in a new window [isdntekvideo] Shipping Payment Returns Terms & Conditions response Contact Us DOMESTIC LOWER 48 US STATES: FREE SALES TAX: CA ONLY VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses. Please use Shipping & Payments tab on top of page for shipping details for your location. Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate. For Canada shipping please select the lowest price. We do not offer expedited shipping. US Territories such as GU, VI, SAIPAN will be charged the same as CANADA shipping rate. Transaction will be held until a full shipping amount received. Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided. Customer assumes shipping charges incurred in shipping to undeliverable address. International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country\'s customs/border regulations. Please contact customs for more information. We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product. We are not responsible for any changes to address after item has been shipped. Item will be shipped out within 24 hours after payment cleared, except for weekends and holidays. PayPal e-check takes 3-7 business days to be processed. We will not ship until an e-check has been cleared. 30 Days Free Returns, please notify us within 30 days after you\'ve received your purchased item. All return requests must be submitted through your account. You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package. Items to be returned must be in resalable condition. All returns are for refund ONLY. No exchange accepted. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. If item is questionable, please consult your local professional/mechanic before making purchase. - Shipping DOMESTIC LOWER 48 US STATES: FREE
SALES TAX: CA ONLY VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses. Please use Shipping & Payments tab on top of page for shipping details for your location. Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate. For Canada shipping please select the lowest price. We do not offer expedited shipping. US Territories such as GU, VI, SAIPAN will be charged the same as CANADA shipping rate. Transaction will be held until a full shipping amount received. Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided. Customer assumes shipping charges incurred in shipping to undeliverable address. International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country\'s customs/border regulations. Please contact customs for more information. We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product. We are not responsible for any changes to address after item has been shipped. - Payment Item will be shipped out within 24 hours after payment cleared, except for weekends and holidays. PayPal e-check takes 3-7 business days to be processed. We will not ship until an e-check has been cleared.
- Returns 14 Days money back, please notify us within 14 days after you\'ve received your purchased item.
All return requests must be submitted through your account. You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package. Buyers pay for return shipping fee. Items to be returned must be in resalable condition. All returns are for refund ONLY. No exchange accepted. Returns for refund are subject to a 20% restocking fee. - Terms & Conditions For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.
All items do not come with installation instruction unless otherwise specified. If item is questionable, please consult your local professional/mechanic before making purchase. - response
- Contact Us
- Store Home
- About Us
- response
- Add To Favorites
- New Arrivals
- Ending Soon
- Contact Us
Need Help? Contact Us on Subscribe to our Newsletter Subscribe Payment Options Copyright © 2017 Speed Daddy. All rights reserved.
|
|
Related Cars:
2013 Mercedes-Benz SL550
2008 Farbio GTS
2006 Cadillac XLR-V
2004 Hamann Porsche 911 Turbo PT 620
2010 Nissan 370Z Roadster
2004 Aston_Martin DB9
2006 Dodge Charger SRT8
2009 Ferrari 599XX
2009 Mercedes-Benz SL 65 AMG Black Series
1958 Ferrari 250 Testarossa
Related Items:
T04E Turbo Kit Wastegate+Intercooler+Manifold 11PCS Kit for Honda Civic D17 EX $699.99
T04E Turbo Kit Wastegate+Intercooler+Manifold 11PCS Kit For Honda Civic D17 DX $766.50
T3/T4 Turbo+Intercooler+Piping+Wastegate 11PCS Kit For BMW E46 330Ci/330Xi 00-07 $542.47
|