Sports Air Filter Sprint Filter Alfa Romeo 4C Fiat Bravo II Lancia Delta IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.
HomeIn the ShowcaseCar BatteriesDiscs and Pads KitSprint Filter Sports Air Filter Alfa Romeo 4C Fiat Bravo II Lancia Delta IIIDESCRIPTIONFounded in 1952, Sprint Filter began to build high-performance air filters and intake systems, which were already extremely innovative back then, working in collaboration with the best fuel system manufacturers and top teams. Since the early 1950s, research and development of new filter fabrics and suction systems have been the basis for the creation of Sprint Filter products. Thanks to the experience acquired in over sixty-five years of activity, which ranks it as the oldest company in the world in the Automotive performance filtration sector, Sprint Filter is able to satisfy every type of need, from the simple replacement sports filter to the original one , to entire extraction systems in carbon fibre, glass fibre, and various plastic materials, with filtering elements that use special micronically calibrated polyester fabrics. Starting from 2010, Sprint Filter has modernized its production plants and launched the motorcycle line, becoming the leading supplier in MotoGP with over 70% of the teams supplied, being the original system supplier of the most prestigious Ducati supersport motorcycles of the last 5 years and the reference for the aftermarket and racing. In October 2018 Sprint Filter completely reorganized the production of air filters and intakes for cars, significantly increasing the models of air filters for cars available, covering the entire fleet. The available filter models (P08, P037, P08F1-85) and the universal intakes have also been implemented, which are already the reference in Motorsport and already approved by the manufacturers to compete in the TCR World Championship and the related TCR national championships. POLYESTER AIR FILTERS: A WINNING TECHNOLOGYOn the one hand, the air filters must guarantee good air passage, on the other they must provide filtration to prevent significant particles from ending up in the cylinders. The two operations are antagonistic to each other, and the air filter will be better when it optimizes these functions. Series cars are normally equipped with paper filters, while for sports filters the usual solution was to use cotton filters soaked in oil. Sprint Filter, with the adoption of polyester filter fabric, takes a leap forward and makes all previous systems obsolete. STRUCTUREThe polyester fabric is extremely permeable and solid, not influenced either by folding during construction or by the pressure difference created during operation, or even by maintenance. The cotton filter, on the other hand, has a texture dependent on the overlap and the number of layers used; furthermore it tends to deform during the phases described above: consequently it will be arranged in areas with high filtration values and others with mediocre values. Main features: Filtration and air passage value constant over time.As regards efficiency, Sprint Filter polyester filters retain:1) 93.13% of 100 µ particles. (P08)2) 91.8% of the 37 µ particles. (P037)3) 95.22% of the 100 µ particles. (P08f1-85)Compared to 76.42% for the four-layer oiled cotton filter.Construction of the support in a single material, to avoid unwanted detachments between different materials.STEEL NETSThis solution represents a further step forward for the P08, P037 and P08F1-85 air filters, which once again separate themselves from the competition due to the use of innovative technologies. After the use of the polyester filter element, in fact, Sprint Filter is the first company in the world in this market to use the steel mesh with epoxy painting to support the filter membrane. The advantages are many: the strength of the wire allows the net to be woven with larger meshes (the free surface in fact goes from 66% to 80%) and to create a filter with superior structural characteristics. No increase in weight is caused by the use of steel compared to light alloy: in addition to the wider weave, the diameter of the wire used is smaller than the previous structure, more than compensating for the greater specific weight. Lastly, the look of the filters is also improved: there is less polyurethane leakage on the filter map (orange for the P08, white for the P037 and black for the P08F1-85) which is much more defined.There DI Service SRL
Via Di Valle Foresta, 4B - 00062 Bracciano (RM)
VAT number IT03598111007This solution represents a further step forward for the P08, P037 and P08F1-85 air filters, which once again separate themselves from the competition due to the use of innovative technologies. After the use of the polyester filter element, in fact, Sprint Filter is the first company in the world in this market to use the steel mesh with epoxy painting to support the filter membrane. The advantages are many: the strength of the wire allows the net to be woven with larger meshes (the free surface in fact goes from 66% to 80%) and to create a filter with superior structural characteristics. No increase in weight is caused by the use of steel compared to light alloy: in addition to the wider weave, the diameter of the wire used is smaller than the previous structure, more than compensating fo Unità di misura Unità Quantità 1 MPN C465S Paese di fabbricazione Regno Unito Marca Sprint Filter Chilometraggio Più di 100,000 km Codice inserzione PRODUCT-01227