The S1 Rear Suspension plans
1.Centre housing
2.Suspensionarms
3.Drive unit
4.Chaintensioner mechanism
5.Uprights
PLEASE NOTE: For sale here arePLANSonly,(Blueprints)whichis adetailed book with CADdrawings& instructions on how to build the CV2 suspension on CD disc.
This is NOT THE BUGGY or SUSPENSION itself.
CV2 plans are on CD disc in PDF format & will be posted to you.
Plans are $60.00
Postage is FREE
·Race provenPorsche 930 CV joints
·Tough driveshafts
·Long throwchain tensioner with easy adjustment screw
·Simplifiedcentre housing with fixed drive hub
·Oversizesealed drive bearings and wheel bearings
·260mm (10”) oftrue wheel travel, can be extended with aftermarket shocks
·Progressivecamber from 0° at ride height for maximum traction to 9.5° for stability onheavy impacts
·Adjustablecamber using upper arm rod end.
·Twin pistonWilwood brake caliper and 315mm inboard floating rotor
·Suitable for12” ATV rims or 14” UTV rims (or larger)
Specifications
Suspension design
Unequal length Double \'A\'arm independent to use coil over shocks, 260mm to 335mm travel (13\")
Track
1420mm (55.9\") hub face to hub face.
Camber
0 to 1.5 degrees negative at ride height, (adjustable) & up to 11 degrees negative at full travel.
Brakes
Large 315mm, (12.4”) diameter inboard rotor with twin piston race caliper.
Ground Clearance
385mm, (15.1\") when fitted with 26x12x12” tyres, (more ground clearance when fitted with 14” rim &tyre package).
Wheel bolt pattern
4 stud on 156mm 6.14” PCD.
Suitable engines
Designed to Suit large chain drive type motorcycle engines up to 200hp.
Estimated cost to manufacture
$2,100.00 to $3,000.00 (depending on skill level & facilities available). All components can be manufactured to thesecomprehensive plans.
PLEASE NOTE: For sale here arePLANSonly,(Blueprints)whichis adetailed book with CADdrawings& instructions on how to build the CV2 suspension on CD disc.
This is NOT THE BUGGY or SUSPENSION itself.
CV2 plans are on CD disc in PDF format & will be posted to you.
Plans are $60.00
Postage is FREE
But above all, if youdon’t want to make the parts you can purchase components for the S1 from TheEdge Products.
Or purchase the complete S1 in kitset form from The Edge Products.
