Pair Front Quick Complete Strut-Coil Spring For 2007-2017 Jeep Compass Patriot For Sale - New and Used

If you are interested with any other Struts（Compatible models）
please click > Front Struts please click > Rear Struts
please click > Front Struts + Rear Struts
please click > Front Shocks please click > Rear Shocks
please click > Front Shocks + Sway Shocks
please click > Front Struts +Suspension Kit

Fitment:

• 2007-2012 Dodge Caliber
• 2007-2017 Jeep Compass
• 2007-2017 Jeep brand new,Strictly produced according to the standard and the quality and stability of the product are better.
  【Easy To Install】Ensure precise fit and quickly replace compete strut.
  【Recover Performance】Replacing our struts assembly, shorten the braking distance, and increase the safety distance,improve steering response, reduce stopping distance and give you more confidence in driving.
  【Increase Tire Grip】By increasing the spring stiffness coefficient, the rapid vibration of the wheel is suppressed, the tire is prevented from leaving the road, and the exercise stability is improved.
  【Bounce Reduction】Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy.
  【Vehicle Compatibility】Please check the description and compatibility chart before your purchasing， if you have any question regarding our this product.

  Package Include:

  • 2 x Complete Struts Assembly

  We'll ship the struts separately in two pakages if the full set is over weight. Notice please!

  How to Install :

  • Step 1:Before You Lift the Vehicle, Loosen Lug Nuts One Full Turn.
  • Step 2:Jack up Vehicle and Use Jack Stands for Safety & Remove the Tire from the Rotor.
  • Step 3:(Wheel Alignment Is Necessary After Strut Replacement.) Marking the Position of All the Bolts Will Help Keep the Alignment Close to Original and save Time Aligning. Use a Colored Pencil to Mark the Old Strut on the Bolt.
  • Step 4:Use Penetrating Oil (Such As Wd40) to Coat Any Rusted Fasteners, Let Soak for Approximately 1 Hour.
  • Step 5:(Optional) While Waiting for Oil to Soak, Take This Time to Inspect All Other Components That May Need Replacement (Brake Pads, Rotors, Brake Hoses, Ball Joints, Cv Boots, Tie Rod Ends, Bushings, Sway Bars, Etc).
  • Step 6:Remove Any Brake Line or Wire Attachments from the Strut Body. Do Not Disconnect Brake Lines (If Possible)! Opening Brake Lines Will Require Bleeding of the Brake System.
  • Use Extreme Caution When Removing Brake Lines from Your Struts, As Any Damage to Your Brake Line Can Result in Expensive and Time Consuming Repairs.
  • Step 7:Remove Sway bar Attached to the Strut Assembly or Control Arm.
  • Step 8:Remove the Tie Rod (Only If It Attached to the Body of the Strut, If Not Leave It Attached to the Steering Knuckle).
  • Step 9:Remove the Strut to Knuckle Bolts at the Bottom of the Strut. on some Vehicles, the Brake Caliper and Rotor May Need to Be Removed to Gain Access.
  • Step 10:Remove the Upper Mounting Plate Bolts Located in the Engine or Trunk Compartment. Do Not Remove the Center Retaining Nut! It Is Not Safe to Unload the Spring from the Assembly in This Position.
  • Step 11:Carefully Remove the Old Strut Assembly from the Vehicle. Be Very Cautious Not to Let the Strut "Drop" down on Your Brake Line, Rotor or Drum.
  • Step 12:Install the New Complete Strut Assembly in the Reverse Order As Above (Steps 11-6). Using an Anti-seize Compound on All Fasteners Is Suggested.
  • Step 13:Carefully Double Check Your Work and Make Sure Everything Is Tightened to Manufacturers Torque Specifications.
  • Step 14:Replace the Tire the Rotor and Tighten to Manufacturers Torque Specifications.
  • Step 15:Slowly Lower the Vehicle down After Removing the Jack Stands. Pay Very Close Attention to Any Odd Sounds When the Vehicle Is Lowered Onto the New Complete Strut Assemblies.
  • Step 16:It Is Very Important That You Immediately "Road Test" Your Vehicle Right Away to Ensure That Installation Was Done Properly. Listen and Feel for Common Signs of Incorrect Installation While Driving Slowly over Speed Bumps, Rough Road or for replacing the shock absorber
    • 1. When installing a new shock absorber, you should pay attention to whether the model matches, please pay attention to the matching model list before purchasing, and confirm whether the left and right are correct.
    • 2. Check the quality status of the new shock absorber, such as whether there is oil leakage in the appearance, etc., pay special attention to the surface of the piston not to be bumped.
    • 3. Professional tools must be used during installation, and the shock absorber must not be forcibly installed.
    • 4. Pay attention to whether the installation position between the shock absorber and the body and the car is correct.
    • 5. During the assembly process, be sure to protect the surface of the piston rod, and avoid using tools to pull the piston rod or bump or scratch the piston rod, otherwise the shock absorber will leak oil.
    • 6. All nuts should be new and tightened according to the specified parameters of the vehicle to ensure that the tightening torque of the connection part meets the specified parameters of the vehicle.
    • 7. When tightening the nuts of the connecting part, it should be carried out in the natural state of the tire and meet the specified parameters of the

      Welcome to
      Item SpecificsBrand SSManufacturer Warranty 1 YearManufacturer Part Number SS80044201SOE Spec or Performance OE SpecPlatform UniversalProduct Type Complete Strut Assembly w/Springs MountsType Complete shock absorber assemblyFitment Type Direct installationKit Parts Included Shock Aborber,Dust Cover,Spring,Bearing,Top Rubber,NutFeatures SealedPlacement on Vehicle Front, Left, RightReturn Policy Free return or replacement within 60 daysShipping Policy Domestic orders are delivered via USPS,UPS,FedExPayment Policy Only accept payment through PayPal preferredCustom Bundle YesGas Charged Shock YesIncluded Hardware NoneModified Item NoAdjustable NoSurface Finish Powder coatingInterchange Part Number 172368,172367Other Part Number 172368,172367,Struts Absorber,Coil Spring AssemblySuperseded Part Number Quick Installation of Two-piece Strut Assembly With SpringQuantity 2 PiecesSingle Dimension(in.) 28.11*16.54*9.45Single Weight (Lb) 43.01Body Length 13.040"Compressed Length 13.540"Extended Length 20.080"Travel Length 6.540"
      Payment 1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)4.Payment must be received within 10 days as sale ended or order might be delayed.Shipping Product will be shipped within 3 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.We ship the package to your shipping address in instead of the one in PayPal. Please tell us your shipping address if it is different from the one in .The tracking number will be given for the customer to check the shipping status online (registered or faster service only).We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on during checkout.Returns WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.We stand behind every product we sell.All of our brand new items come with a 60-Days money-back guarantee.We define the item as defective only if it doesn't function as described.It is the buyer's responsibility to understand the item description before offerding.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.Shipping & handling cost are not refundable.Man-made damage by abuse or wrong operresponse 1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.2. It is impossible to address issues if we do not know about them!

      DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Store CategoryStore Home Shocks Struts Complete Struts Struts & Suspension Kit Air Suspensions Lift Supports Strut Mount Coilover OtherHot Item Front Rear Set of 4 For Chevrolet Tahoe Suburban GMC Yukon XL 1500 Shocks Struts USD 57.76 For Toyota Corolla 2009-2013 Front 2 Shocks Struts & Coil Spring Mount Assembly USD 97.77 Pair Front Quick Complete Strut-Coil Spring For 2007-2017 Jeep Compass Patriot USD 107.77 Pair Rear Shocks & Struts For 2011-2019 Ford Fiesta 2011-2014 Mazda 2 1.5L 1.6L USD 36.22 4Pcs For Kenworth Goodyear Air Suspension Spring Bags 1R11-221 W01-358-9622 New USD 260.99 Excellent Delivery
      Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Pair Front Quick Complete Strut-Coil Spring For 2007-2017 Jeep Compass Patriot

      If you are interested with any other Struts（Compatible models）
      please click > Front Struts please click > Rear Struts
      please click > Front Struts + Rear Struts
      please click > Front Shocks please click > Rear Shocks
      please click > Front Shocks + Sway Shocks
      please click > Front Struts +Suspension Kit

      Fitment:

      • 2007-2012 Dodge Caliber
      • 2007-2017 Jeep Compass
      • 2007-2017 Jeep brand new,Strictly produced according to the standard and the quality and stability of the product are better.
        【Easy To Install】Ensure precise fit and quickly replace compete strut.
        【Recover Performance】Replacing our struts assembly, shorten the braking distance, and increase the safety distance,improve steering response, reduce stopping distance and give you more confidence in driving.
        【Increase Tire Grip】By increasing the spring stiffness coefficient, the rapid vibration of the wheel is suppressed, the tire is prevented from leaving the road, and the exercise stability is improved.
        【Bounce Reduction】Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy.
        【Vehicle Compatibility】Please check the description and compatibility chart before your purchasing， if you have any question regarding our this product.

        Package Include:

        • 2 x Complete Struts Assembly

        We'll ship the struts separately in two pakages if the full set is over weight. Notice please!

        How to Install :

        • Step 1:Before You Lift the Vehicle, Loosen Lug Nuts One Full Turn.
        • Step 2:Jack up Vehicle and Use Jack Stands for Safety & Remove the Tire from the Rotor.
        • Step 3:(Wheel Alignment Is Necessary After Strut Replacement.) Marking the Position of All the Bolts Will Help Keep the Alignment Close to Original and save Time Aligning. Use a Colored Pencil to Mark the Old Strut on the Bolt.
        • Step 4:Use Penetrating Oil (Such As Wd40) to Coat Any Rusted Fasteners, Let Soak for Approximately 1 Hour.
        • Step 5:(Optional) While Waiting for Oil to Soak, Take This Time to Inspect All Other Components That May Need Replacement (Brake Pads, Rotors, Brake Hoses, Ball Joints, Cv Boots, Tie Rod Ends, Bushings, Sway Bars, Etc).
        • Step 6:Remove Any Brake Line or Wire Attachments from the Strut Body. Do Not Disconnect Brake Lines (If Possible)! Opening Brake Lines Will Require Bleeding of the Brake System.
        • Use Extreme Caution When Removing Brake Lines from Your Struts, As Any Damage to Your Brake Line Can Result in Expensive and Time Consuming Repairs.
        • Step 7:Remove Sway bar Attached to the Strut Assembly or Control Arm.
        • Step 8:Remove the Tie Rod (Only If It Attached to the Body of the Strut, If Not Leave It Attached to the Steering Knuckle).
        • Step 9:Remove the Strut to Knuckle Bolts at the Bottom of the Strut. on some Vehicles, the Brake Caliper and Rotor May Need to Be Removed to Gain Access.
        • Step 10:Remove the Upper Mounting Plate Bolts Located in the Engine or Trunk Compartment. Do Not Remove the Center Retaining Nut! It Is Not Safe to Unload the Spring from the Assembly in This Position.
        • Step 11:Carefully Remove the Old Strut Assembly from the Vehicle. Be Very Cautious Not to Let the Strut "Drop" down on Your Brake Line, Rotor or Drum.
        • Step 12:Install the New Complete Strut Assembly in the Reverse Order As Above (Steps 11-6). Using an Anti-seize Compound on All Fasteners Is Suggested.
        • Step 13:Carefully Double Check Your Work and Make Sure Everything Is Tightened to Manufacturers Torque Specifications.
        • Step 14:Replace the Tire the Rotor and Tighten to Manufacturers Torque Specifications.
        • Step 15:Slowly Lower the Vehicle down After Removing the Jack Stands. Pay Very Close Attention to Any Odd Sounds When the Vehicle Is Lowered Onto the New Complete Strut Assemblies.
        • Step 16:It Is Very Important That You Immediately "Road Test" Your Vehicle Right Away to Ensure That Installation Was Done Properly. Listen and Feel for Common Signs of Incorrect Installation While Driving Slowly over Speed Bumps, Rough Road or for replacing the shock absorber
          • 1. When installing a new shock absorber, you should pay attention to whether the model matches, please pay attention to the matching model list before purchasing, and confirm whether the left and right are correct.
          • 2. Check the quality status of the new shock absorber, such as whether there is oil leakage in the appearance, etc., pay special attention to the surface of the piston not to be bumped.
          • 3. Professional tools must be used during installation, and the shock absorber must not be forcibly installed.
          • 4. Pay attention to whether the installation position between the shock absorber and the body and the car is correct.
          • 5. During the assembly process, be sure to protect the surface of the piston rod, and avoid using tools to pull the piston rod or bump or scratch the piston rod, otherwise the shock absorber will leak oil.
          • 6. All nuts should be new and tightened according to the specified parameters of the vehicle to ensure that the tightening torque of the connection part meets the specified parameters of the vehicle.
          • 7. When tightening the nuts of the connecting part, it should be carried out in the natural state of the tire and meet the specified parameters of the

            Welcome to
            
            PaymentShippingReturnsresponse 1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)4.Payment must be received within 10 days as sale ended or order might be delayed. Product will be shipped within 3 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.We ship the package to your shipping address in instead of the one in PayPal. Please tell us your shipping address if it is different from the one in .The tracking number will be given for the customer to check the shipping status online (registered or faster service only).We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on during checkout. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.We stand behind every product we sell.All of our brand new items come with a 60-Days money-back guarantee.We define the item as defective only if it doesn't function as described.It is the buyer's responsibility to understand the item description before offerding.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.Shipping & handling cost are not refundable.Man-made damage by abuse or wrong oper 1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.2. It is impossible to address issues if we do not know about them!
            

            All rights reserved.

            
            
            
            

            ---