Caution My Fellow Riders: Do not use an oversized #8 screw with the hasp thatis being offered by others thatalso sell the Franzen latch. It is not my listing. It will require thehole in the lid tobeenlarged for a #8 screw and can damage the lid. Also, when using a# 8 pan head screw as pictured in the otherlisting, you can see the large head is so much larger than the screws pictured for the latch. Since the head is too large, when closing the lid, it willdepress the top of the pan causing severe scraping and a misalignment of the latch. I offer this advice because my design of attaching the hasp works and when copied by others incorrectly, it appears that I failed to set up the screw attachmentof the hasp without thought. My screwsizes that I supply with my listings are the correctsize and are on thousands of latches out there. Check my response.
HASP IS INCLUDED WITH LATCH BUT NOT IN PICTURE.
I know you will be satisfied with your purchase. I have supplied over 5000 bikers
with these latches totaling over 10,000 latches.
Check my responses.
Self-tapping screws! I don\'t think so.
Not here at TOMBUYANDSELL.
NOTE:
Using Self-Tapping Screws on the latch creates a high probability of weakening the stand-off causing premature latch failure. I totally discourage using self-tapping screws. It is an injustice advised by others.
NOTE: This listing does not include spacers. I sell either the stock Harley spacers or custom made spacers in other listings. Click the door on the right in the blue bar above to visit my store for all of my listings.
This listing is for one new Harley OEM latch, properly tapped for the included machine screws of correct length.
Latches are manufactured by Franzen, supplier to Harley.
Included in this listing:
Chrome polished finished, Franzen latch, properly tapped
Two (2) full length machine screws for front mounting
Two (2) full length machine screws for rear mounting or forward mounting without lock catch.
1406 Hasp tapped for machine screws using a low profile headand not a Phillips head screw which is too large and will cause considerable scraping on the top of the tour pack pan.
Hasp includes new backing plate.
Two allen wrenches: one for hasp screws and one for latch and spacer screws.
Spacer screws included with washers and lock nuts. Yes, the spacer should be attached prior to latch attachment. This is totally your choice.
Note: If your spacer is pre 2007 you may require a minor modification as outlined in my directions.
Note: If you have a Franzen hasp attached and rivets are secured tightly, this latch will mate
with your existing hasp from 1994/1995 to 2013.
Presto hasps used prior to 1994/1995 had 2 different mounting configurations.
If you have one of these, contact me prior to purchasing. I have replacements for all hasps used at no additional cost and gladly substitute them if requested prior to shipping.
Franzen hasps from 1994/1995 until 1996 had a slightly different mounting configuration.
If you have one of these, contact me prior to purchasing.
If you want more detailed information please see below or contact me with your phone number.
I know the history of the latch as simple as it may seem and I can supply the correct fitment for your vintage that you can not even obtain from Harley.
There is NO SPACER in this kit.
If you do not know what a spacer is or if you need them please contact me. Please don\'t purchase from this listing and then leave me response stating it would have been great if they were included. I offer spacers in another listing.
Why are there no spacers? 99% of my customers already have spacers and I\'d rather savefellow riders money they don\'t need to spend.
If the following is more than you want to read, contact me through email and include your phone #. In most cases I can explain what you need to order in a short phone call.
If you need more than one or more complete kits, please visit my store by clicking on the red door icon in the blue header just above across from my name tombuyandsell. Thanks for looking. I have been selling Harley latches on since 1-6-2004. Tom
THIS LISTING IS FOR (1) ONE LATCH, ONE HASP AND ALL THE SCREWSNEEDED.
THE FLAG ON LATCH IS ONLY A REFLECTION AND NOT ON THE LATCH YOU WILL RECEIVE.
THERE ARE NOSPACERS BEING SOLD WITH THIS LISTING.
INCLUDES SCREW WASHERS AND ALLEN WRENCHES.
PLEASE READ ENTIRE LISTING BEFORE PURCHASING
I have always gone out of the way to help my fellow riders, but to open a line of communication, you must start with ’s email. I check emails several times a day and normally will contact you within hours and many times within minutes. I welcome questions.
TO ALL OF MY FELLOW RIDERS: There are copies of this latch being sold.
MYLATCH IS THE EXACT OEM FRANZEN LATCH THAT YOU WOULD RECEIVE FROM HARLEY BUT IN A COMPLETE PACKAGE INCLUDING MY DIRECTIONS AND PRE-TAPPED LATCH WITH THE CORRECT LENGTH SCREWS.
To be able to identify the latch as the OEM please look at the following pictures.
NOW FOR LATCH IDENTIFYING 101
THE FOLLOWING PICTURE SHOWING HASPS ARE TO HELP IDENTIFY THE HASP YOU NEED FOR A FRANZENLATCH ASSOLD IN THIS LISTINGAND THE WRONG HASP BEING OFFERED WITH THE COPYOF THE FRANZEN LATCH.
ONE HASP PER LATCH ORDERED ISBEING SOLD WITH THIS LISTING.
THIS LISTINGINCLUDES AN OEM FRANZEN LATCH FOR A HARLEY DAVIDSON TOUR PACK OR PRE 1993 SADDLE BAG IFA FRANZEN HASP IS ALREADY ON THE LID. THE LISTING ALSO INCLUDES 4 SCREWS AND WASHERS WHICH WILL ALLOW YOU TO MOUNT THE LATCH IN THE FORWARD OR REAR POSITION ON A HARLEY TOUR PACK OR ON THE PRE 93 BAGS. THE LATCH IS ALREADY PRE-TAPPED FOR EASY INSTALLATION. IF YOU HAVE THE OLD PRESTO HASP YOU WILL NEED TO REPLACE THE HASP WITH THE HASP BEING SOLD WITH THIS LATCH.
BY CLICKING ON THE DOOR ICON ON THE ABOVE BLUE LINEON THE TOP RIGHT OF THE LISTING, YOU CAN SEE ALL OF MY LISTINGS.
CHECK MY responseS ON THOUSANDS OF THESE LATCHES
1NEWTOUR PACK CHROME LATCH WITH THREADED MOUNTING HOLES AND SCREWS FOR FORWARD OR REAR POSITION MOUNTING. ALSO ON NEW HASP WHICH WILL SCREW ON (NOT RIVET ON).
DON\'T FORGET ABOUT MYDIRECTIONS THAT I INCLUDE TO MAKE EVERYTHING WORK. ALSO, USING THE WRONG SCREW LENGTH CAN PREVENT THE LATCH FROM WORKING OR RUIN THE MOUNTINGS, SO I MAKE SURE YOU HAVE THE PROPER SCREWS.
IF YOU DON\'T KNOW THE DIFFERENCE FROM A FRANZEN HASP AND A PRESTO HASP, PLEASE EMAIL ME AND I WILL BE HAPPY TO ANSWER ANY QUESTIONS YOU HAVE. INCLUDE YOUR PHONE NUMBER AND I WILL BE HAPPY TO CALL YOU.
IF YOU HAVE A FRANZEN HASP THAT IS TIGHT YOU DO NOT NEED TO REPLACE THE HASP AT THIS TIME, SO SAVE THE INCLUDED HASP FOR THE DAY THE RIVETS BECOME LOOSE AND REPLACE IT TO PREVENT THE EDGE OF THE LID FROM BREAKING OFF.
IF YOU HAVE A SPACER UNDER THE LATCH AS ALL LATCHES MOUNTED ON HARLEY TOUR PACKS HAVE, YOU DO NOT NEED A NEW SPACER.
IF YOU NEED SPACERS OR OTHER TOUR PACK HARDWARE,PLEASE SEE MY OTHER LISTINGS BY CLICKING ON THEDOOR ICON NEXT TO MY NAME TOMBUYANDSELL AT THE TOP RIGHT SIDE OF THE LISTING.
IF YOU HAVE ANY QUESTIONS ON MOUNTING,I AM ALWAYS HAPPY TO HELP.
PLEASE EMAIL ME THROUGH WITH YOUR PHONE NUMBER.
LATCHES ARE OEM, NOT AFTER-MARKET.
OEM IS THE TERM USED TO STATE THEY ARE MANUFACTURED BY THE ORIGINAL EQUIPMENT MANUFACTURER. THEY ARE EXACTLY THE RIGHT PART.
THESE LATCHES WILL FIT80\'S TO 2013.
THIS LATCH WILL FIT THE NEW SPACERS AS WELL AS THE OLD SPACERS WITH A MINOR MODIFICATION TO THE OLD PLASTIC SPACER WHICH I WILL EXPLAIN IN THE NEW DIRECTION SHEET.
YOU WILL NOT NEED TO MAKE ANY CHANGE TO YOUR TOUR PACKUNLESS YOU CHOOSE TO ATTACH YOUR SPACER PRIOR TO ATTACHING THE LATCH AS MY DIRECTIONS ILLUSTRATE.
THEY WILLREPLACE THE OLDER STYLE LATCH MADE BY PRESTO BECAUSE THISLISTING DOESCOME WITH A LID MOUNTED HASP. THE OLDER STYLEPRESTO LATCH LOOKS SIMILAR BUT PART OF THE UPPERHASP SHOWS THROUGH THE LATCH FACE WHEN CLOSED. WHEN ORDERING TO REPLACE THE PRESTO LATCH YOU SHOULD NORMALLY ASK FOR A CHANGE TO THE 1401M HASP WHEN MAKING YOUR PAYMENT OR CONTACT ME BEFORE ORDERING IF YOU ARE NOT SURE OF THE HASP YOU NEED. IN A FEW RARE CASES YOU MAY NEED THE 1401U (UNMODIFIED HASP) THAT HAS SCREW STAND-OFFS ON THE REAR OF THE HASP SIMILAR TO THE STAND-OFFS FOUND ON THE LATCH. IN THIS CASE YOU SHOULD ASK FOR THE 1401U HASP WHEN ORDERING.
THE FOLLOWING IS VITAL AND MORE IMPORTANT THAN YOU CAN IMAGINE.
THE LOWERLATCHPART THAT ATTACHES TO THEBOTTOM OF THE TOUR PACK,WHEN RECEIVED NEW FROM HARLEY,THEY HAVE HOLES REQUIRING THE USE OF SELF TAPPING SCREWS. I HAVE THREADED THE SCREW HOLES MAKING INSTALLING THEM A BREEZEWITH THE INCLUDED NON-SELF TAPPING SCREWS.YOU WILL BE BETTER OFF IF YOU DON\'T USESELF TAPPING SCREWS.
THE TIP OF THE SELF TAPPING SCREWS ARE NOT A FULL THREAD TO THE END WHICH IS A MAJOR REASON FOR POOR GRIPPING AND FAILURE OF THE SCREW!ALSO, SINCE THE NEW STAND-OFFS HAVE BEEN USED, I HAVE FOUND THAT USING SELF-TAPPING SCREWS MAY CAUSE THE STAND-OFF TO BREAK DUE TO THE POOR THREADING ABILITY OF THE SELF-TAPPING SCREW.
PLEASE NOTE: International shipping on this listing is being handled through the Global shipping at this time. I have nothing to do with the high rate charged by this program. I expect to be changing this back to first class mail and include registered mail to insure the package does not become lost through the receiving countries postal service. Changing back take quite a bit of time so for now the rates are a bit out of line.
CHECK OUT MY OTHER LATCH ADSWHICH INCLUDE BRUSHED ALUMINUM SPACERS THATI CUSTOM FIT TO THE LATCH BODY.
IF YOU HAVE ANY QUESTIONS DON\'T HESITATE TOEMAIL ME 7 DAYS A WEEK, INCLUDE YOUR PHONE NUMBER ANDI WILL BE HAPPY TO CALL YOU.
.
Posted with Mobile
