Fast-Autos.net


Search for a different part:

New Starter For 1991-1996 Ford Explorer 4.0L 1990-1996 Ford Ranger 4.0L 336-1116 For Sale - New and Used


New Starter For 1991-1996 Ford Explorer 4.0L 1990-1996 Ford Ranger 4.0L 336-1116
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

New Starter For 1991-1996 Ford Explorer 4.0L 1990-1996 Ford Ranger 4.0L 336-1116:
$45.99

  • Item specifics :
  • 13878 New Alternator For Toyota Corolla Matrix 2003-2008 Pontiac Vibe 2003-2008

    Item specifics :

    • Brand new
    • All of our Alternators are tested to ensure product performance and durability
    • Unit Type: Alternator
    • Part Type: UNIT
    • Voltage: 12
    • Rotation: CW
    • Amperage: 80
    • Pulley Class: S6
    • Regulator: IR
    • Fan Type: IF

    Fits Vehicles of the Following Years and Make :

    • Pontiac Vibe 2003-2008 1.8L
    • Toyota Celica 2000-2005 1.8L
    • Toyota Corolla 2003-2008 1.8L
    • Toyota Matrix 2003-2008 1.8L
    • Toyota MR2 2000-2005 1.8L

    Part Number:

    • Arrowhead:AND0261
    • AC-Delco:334-1413
    • Denso:102211-1900, 102211-1910, 102211-1920, 102211-2340, 102211-2610
    • J & N:400-52056
    • Lester:13878
    • Toyota:27060-0D110, 27060-22020, 27060-22030, 27060-22040, 27060-22180
    • WAI:1-2372-01ND, 1-2373-01ND

    Package:

    • 1xAlternator

    Attention:

    • We strongly suggest comparing the posted picture to your faulty unit!Read and use product description to ensure you get the correct parts! compatibility is for search purpose only. Please double review ourinterchange/replace parts number and check listing pictures (those two are critical).

    ​How to make your alternator last longer?

    • Often an alternator fails prematurely when a protective engine undercoveror shield is damaged or missing. This happens because water splashing fromthe road gets inside the alternator and causes it to wear faster. If your engineundershield is damaged, have it replaced to keep the engine compartmentclean and dry. A coolant or oil leak can also damage the alternator. Similarly,if you have to shampoo the engine compartment, the alternator must beprotected from water and detergent.

    Item Specifics Interchange Part Number AND0261, 334-1413, 400-52056, 13878 Type Alternator Rotation CW Pulley Class S6 Regulator IR Fan Type IF Other Part Number 1-2372-01ND, 1-2373-01ND Fitment Type Direct Replacement Brand KAC Manufacturer Warranty Yes Amperage 80 Voltage 12 v
    Payment

    We acceptPayPalonly.

    If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually.When youclickthe Pay Now button, will automatically determine if there are other items you have won or purchased from me and will combinethem for your review.

    Shipping

    All items will be shipped to buyer\'s address,we don\'t take charge for wrong address left.

    In most cases, delivery takes around 1-5 business days from your nearest warehouse, it\'s highly depended on the efficiency of the shipping carrier. If your item doesn\'t arrive on time, please contact us immediately for further assistance. Please note there is no local pickup service available.

    Returns

    1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.

    2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your ID.

    3.Return shipping is to be paid by the Buyer.

    4.We act as a responsible seller; we are willing to actively undertake the following responsibilities:
    a. The item is lost during transit;
    b. The item is damaged during transport;
    c. Due to our work errors, transporting the wrong items to the buyer;
    d. The item in the actual use of the process of quality problems.

    Contact Us

    1.Welcome to my shop,We offer an extensive range of products selected by our professionals.superiority in details and quality is a high priority. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
    2.As an internet seller, we collaborate with excellent international transport companies, we have our own warehouses, offering the most convenient delivery service possible. On-time shipping and reliable quality control are key areas of importance in our shop.
    3.We are increasingly expanding US markets based on high quality products, excellent service, reasonable priceboas and timely delivery. Please contact us at any time for more information.We work hard to make sure EVERY CUSTOMER 100% approvingly.

    We maintain high standards ofcellence and strive for 100% customexer satisfaction!

    response is very important to us.

    If you have any problem, please feel free to contact us via message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.

    We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day!

    DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US 13878 New Alternator For Toyota Corolla Matrix 2003-2008 Pontiac Vibe 2003-2008

    Application:

    • 1990-1996 For ford Aerostar 4.0L
    • 1991-1996 For ford Explorer 4.0L
    • 1990-1996 For ford Ranger 4.0L
    • 1994-1997 For mazda B4000 4.0L
    • 1991-1994 For mazda Navajo 4.0L

    Reference number:

    AC DELCO: 336-1116
    ARROWHEAD: SFD0002
    CARGO: 111844
    DELCO REMAN: 10465343
    For ford: F07U-11000-BA, F0TZ-11002-B, F7PU-11000-KA, F7PZ-11002-KA, F07U-BA, F7PU-KA
    J & N: 410-14027
    LESTER: 3224, 3239, 3227
    For mazda: ZZL1-18-400
    MOTORCRAFT: SA-776, SA-853
    REMY REMAN: SR110670, SR111004
    WAI: 2-1885-FD, 2-1885-FD-1

    Specification:

    √Starter Finish: Black painted

    √Adjustable Mounting Block: Yes

    √Unit Type: Starter

    √Teeth: 10
    √Kilowatts: 1.4
    √Voltage: 12
    √Rotation: CW
    √Note: PMGR

    Package Includes:

    • 1 x Starter

    Decription:

    √ Brand new and Hight quality

    √All of our starters are tested to ensure product performance and durability

    √Dual Bolt Pattern fits either 153 or 168 Tooth Flywheel/Flexplates. Allows Starter to be Used with Automatic or Manual Transmissions.

    √Straight across Bolt Pattern.

    √3 Horse Power Starter Allows for Superior Performance as Well as the Gear Reduction, Producing up to 50% More cranking Power over Stock Starters.

    √2 Wire Hookup

    Fault check:

    The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:

    1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.

    2. The starter thread is loose or off, and the switch or adsorption switch fails.

    3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.

    4. Excitation coil or armature coil is short-circuited or disconnected.

    5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance

    In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed

    5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.

    How to Install a Car Starter:

    There’s never a convenient time for your vehicle’s starter to fail. A car starter\'s job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.

    Part 1: Removing a Bad Starter

    (1).Disconnect the battery.

    You will not need to remove the positive cable on the battery.

    Always disconnect the battery before servicing the electrical system in your vehicle.

    (2).Jack up the vehicle if need be.

    Ensure you jack the vehicle up on firm, level ground.

    (3).Locate the starter.

    The smaller cylinder attached to the starter is the starter solenoid.

    A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.

    (4).Disconnect the wiring to the solenoid.

    In some cases, it may just be clips you need to disconnect for the wiring.

    On some starters, you will need to loosen bolts or screws that hold the wires in place.

    (5).Remove the starter retaining bolts then the starter.

    Be sure to use the correct size socket, otherwise you risk damaging the bolts.

    (6).Compare the new starter to the old one.Slide the starter into place.

    If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.

    New starter solenoids often come with four terminals, but can be used with only two.

    Part 2: Installing a New Starter

    (7).Insert the starter retainer bolts.

    If the bolt does not thread properly, unscrew it and try again.

    Make sure the bolts are tight so they can’t vibrate loose while the engine is running.

    (8).Connect the wiring to the starter solenoid.

    With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.

    (9).Reconnect the battery.

    With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.

    If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.

    (10).Listen to the vehicle as you attempt to start it.

    As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.

    (11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.

    A weak connection from the battery can prevent the engine from starting.

    Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.

    If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.

    (12).Check to see the starter solenoid is bad.

    If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.

    If the test light does light up, it means the solenoid is good, but the starter itself may have failed.

    Frequently Asked Questions:

    (1).Why is my car starter burning out?

    You likely cranked the starter for too long.

    (2).I have to change the starter fairly often in my car. What could be causing this?

    A leak of some sort could be fouling the starter if fluid is dripping on it. If that\'s the case,

    replacing the starter doesn\'t fix the leak so it\'s only a matter of time before the new starter fails.

    (3).What is the black wire connected to?

    He black wire can be commonly associated with the wire that connects the battery to the ignition.

    If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?

    How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.

    Follow it and find the origin of the wire, it could be a simple fix just take a look at it.

    (4).What does a bad starter sound like?

    In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.

    One really common sign is if you see any smoke coming from the starter.

    (5).If my car is grinding when I turn the key, does that mean I have a bad starter?

    No. It\'s your flywheel. When you start your car the grinding noise would be your flywheel that\'s connected to the starter.

    Application:

    Item Specifics Interchange Part Number 336-1116, SFD0002, 111844, 10465343, 410-14027 UPC Does not apply Brand KAX Manufacturer Warranty 5 Years Part Type Starter Teeth 10 Kilowatts 1.4 Voltage 12 Rotation CW Note PMGR Manufacturer Part Number Does Not Apply Fitment Type Direct Replacement Other Part Number 336-1116, SFD0002, 111844, 10465343, 410-14027 Custom Bundle No Modified Item No Non-Domestic Product No MPN Does not apply
    Payment

    We acceptPayPalonly.

    If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually.When youclickthe Pay Now button, will automatically determine if there are other items you have won or purchased from me and will combinethem for your review.

    Shipping

    All items will be shipped to buyer\'s address,we don\'t take charge for wrong address left.

    In most cases, delivery takes around 1-5 business days from your nearest warehouse, it\'s highly depended on the efficiency of the shipping carrier. If your item doesn\'t arrive on time, please contact us immediately for further assistance. Please note there is no local pickup service available.

    Returns

    Buyer Returns Please note:
    Lost accessories/quality problem/shipping damage etc.
    Please contact us first for a good solution instead of filing a return dispute.

    Necessary conditions for buyer\'s return and exchange
    Rule A: Unused goods in original packaging.
    Rule B: No damage to the outer package.

    How to handle the return?
    1: Contact the seller first
    2: Send pictures: outer packaging, scanned labels, the item itself and complete accessories, etc.
    3: Receive a return label
    4: Item delivery - Payment reimbursement
    (Returns or exchanges due to the buyer\'s own reasons will be charged a 15% restocking fee on the original purchase, as well as return shipping or exchange shipping. (Exchanges due to shipping errors will not be charged a restocking or shipping fee.)

    Shipping costs are the responsibility of the buyer in the event of the following reasons
    1: Ordering error
    2: Found a better price
    3: Change of mind
    4. Any buyer\'s own reasons

    Contact Us

    1.Welcome to my shop,We offer an extensive range of products selected by our professionals.superiority in details and quality is a high priority. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
    2.As an internet seller, we collaborate with excellent international transport companies, we have our own warehouses, offering the most convenient delivery service possible. On-time shipping and reliable quality control are key areas of importance in our shop.
    3.We are increasingly expanding US markets based on high quality products, excellent service, reasonable priceboas and timely delivery. Please contact us at any time for more information.We work hard to make sure EVERY CUSTOMER 100% approvingly.

    We maintain high standards ofcellence and strive for 100% customexer satisfaction!

    response is very important to us.

    If you have any problem, please feel free to contact us via message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.

    We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day!

    On Jun 7, 2023 at 07:07:06 PDT, seller added the following information:

    On May 11, 2024 at 00:27:15 PDT, seller added the following information:


    Buy Now



    Search for a different part:


    Related Cars:



    1958 Ferrari 250 Testarossa
    1958 Ferrari 250 Testarossa

    2000 Ford SVT Mustang Cobra R
    2000 Ford SVT Mustang Cobra R

    2009 Rolls-Royce Phantom Coupe
    2009 Rolls-Royce Phantom Coupe

    2007 Sportec 911 Turbo SP580
    2007 Sportec 911 Turbo SP580

    2001 Jaguar XKR Silverstone
    2001 Jaguar XKR Silverstone

    2009 Koenigsegg NLV Quant Concept
    2009 Koenigsegg NLV Quant Concept

    2007 Mercedes-Benz G 55 AMG
    2007 Mercedes-Benz G 55 AMG

    2006 Novitec 612 Scaglietti
    2006 Novitec 612 Scaglietti

    2006 Mitsubishi Eclipse Ralliart Concept
    2006 Mitsubishi Eclipse Ralliart Concept

    2006 BF_Performance Murcielago
    2006 BF_Performance Murcielago

    Related Items:

    New Starter for 8200308 39MT Cummins Caterpillar 12V 11T 39MT picture

    New Starter for 8200308 39MT Cummins Caterpillar 12V 11T 39MT

    $186.86



    New 12V 10 Teeth Starter For Cummins Various 5302289 5449610 picture

    New 12V 10 Teeth Starter For Cummins Various 5302289 5449610

    $298.88



    New Starter For Briggs Vanguard V-Twin 807383 809054 428000-0230 picture

    New Starter For Briggs Vanguard V-Twin 807383 809054 428000-0230

    $52.95




    Contact | Copyright Information | Privacy Policy & Terms of Use