Replacement fuel injector for N54, N63, and S63powered BMW\'s, , most up to date fuel injector featuring optimized internal improvements, index 12, includes replacement decoupling element, viton seal is included with the injector
Direct injection engines offer numerous advantages over port injection engines. The main advantage is better atomization of fuel entering the combustion chamber. Direct injection also requires a significantly higher pressure to atomize the fuel properly which can cause components of the fuel system to fail over time. Clogged fuel injectors can cause a variety of performance issues including misfire and power loss.
N54, N63, and S63fuel injectors have an index number which is critical to take note of when it\'s time to replace a failed fuel injector. The index number dictates on whether fuel injectors can be mixed or not. These fuel injectors are the most recent version of what\'s available and can only be installed with other fuel injectors that have an index number of 11 or higher. If the injectors are 10 or lower all fuel injectors will need to be replaced to ensure proper fuel system and engine performance.
Note: When installing new injectors a calibration must be carried out. The adjustment value must be read off the injector before installation and noted. This adjustment value will be needed later on when the calibration is carried out. The injector has a protective cap on the tip of the injector which keeps the tip clean from contaminants and keeps the viton seal compressed. Leave this cap in place just prior to installation as the seal will expand making installation impossible without the special dies to compress the seal.
Symptoms of Problematic Fuel Injectors:
• Rough cold starts - Stumbling idle
• Leaking Fuel Injectors - Smell of fuel or smoke from rear tailpipe/exhaust
• Misfires and Check Engine Lights (CEL)
• Inconsistent idling,hesitationand potential Fuel Injectors work on the following model BMW vehicles:
• N54 (135i, 135iS, 1M, 335i, 335is, 335xi, 535i, 535xi, X6, Z4)
• N63 (550i, 750i, 750Li, X5
• S63 (M5, M6, X5M, 1x OEM BMW New Fuel Injector (Index 12)
• 1x OEM BMW Decoupling Element (Sealing Ring)
The actual part number on the received part may vary between13538616079 or13538648937. These are interchangeable part numbers.
If you have any questions regarding this product feel free to call or text us at