The Hydro-Boostis powered by hydraulic pressure from the power steering pump. It requires \'no vacuum\'. This has several advantages. No external vacuum pump required on low vacuum high performance motors. No \'small bore\' master required. Firewall and valve cover clearance is increased. Frame mounted clearance is increased.
Frame mounted Hydro-Boosts® are the same width as a master cylinder, giving additional exhaust clearance.The Hydro-Boost® can be fitted any where a vacuum booster will fit. It can use stainless braided hoses or rubber type and brackets are available for most applications.
The Hydro-Boost® uses fluid pressure from the existing power steering pump. The average power steering pump puts out from 800psi to 1400psi. The Hydro-Boost® uses this pressure that is always circulating through it, to convert to pressure to apply against the master cylinder. The output of the Hydro-Boost® is affected by three factors.1. The pedal ratio. We prefer that the pedal ratio be between 6:1 to 7:1.
2. The pressure output from the pump.
3. The master cylinder bore diameter. These are factors necessary to design the system that will work for a given application.It is imperative that the system be clean. Any residual metallic sediment laying in an old pump or steering box, will be floated up and through the system when the fluid comes through on start up. If any of this sediment lodges in the relief valve of the pump, there will be no pressure from the pump. This will result in hard steering and no power brakes. A filter or a new system is required to maintain any warranty.
Kit includes:
• Hydro Power brake booster with firewall mount brackets, push rod and pedal clevis (1967-81 gm Fbody) and (1964 thru 1972 A body)
Stainless Hose kit with fittings sold separately, Add $279.99. Please specify.
Rubber Hose kit with fittings also available, Add $$219.99.
INTERNATIONAL SHIPPING(IF AVAILABLE):
For international shipments, we use the Global Shipping Program. We will ship you item to an freight forwarding warehouse here in the states and then takes control, generates a new tracking # and forwards the shipment to your destination. If your order has been refused delivery and is shipping back, it is shipping back to , not us. Our obligation is to get your order to at which point, takes over the shipment and assumes responsibility of the shipment.
BEFORE LEAVING response:
If you receive an order and does not meet your expectations, please allow us the opportunity to fix the problem before leaving negative response or rating us.
We want you to be happy with your purchase!Contact us via the Message Center. Messages are answered within 24 business hours.
SHIPPING INFORMATION:
We ship via USPS and Fedex.
Local pickup is available.
Track Page Views With
Auctiva\'s FREE Counter
