LN Engineering\'s exclusive full-flow spin-on oil filter adapter allows for use of a conventional spin-on oil filter, rather than expensive and messy cartridge-style filters, and improves oil filtration.
Makes oil changes easy again!
This adapter is for 718 MY17+ Boxster and Cayman four cylinder turbo models only and uses the Napa Gold 7302 oil filter.
The LN Engineering Spin-On Oil Filter Adapter helps improve the longevity of your engine by providing full flow filtration with glass-enhanced cellulose media. This limits collateral damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris.
Since a steel-bodied spin-on conventional oil filter is now employed, you can further reduce engine wear by using a Filtermag, which reduces iron contaminants in your motor oil and thus reduces wear associated with these particles normally unfiltered by the oil filter.
When installing, be sure to lubricate both o-rings with clean engine oil. Screw the oil filter adapter onto the engine by hand. Once the spin on filter adapter is fully engaged to the block, use a 27mm socket and torque to 25 Nm (18 Ft/Lbs). Also be sure to oil the filter gasket.
Filter should be installed by hand then once snug, turned another 3/4 to 1 turn to finish filter installation or to the filter manufacturers recommended specifications.
Oil change interval should not exceed 6 months or 5,000 miles for street using a 0w40 or 5w40 viscosity motor oil; higher viscosity is not recommended. The filter used in conjunction with the spin on oil filter adapter is an excellent choice for this application with adequate size and very high burst strength (when using a Napa Gold 7302 or Wix 57302 filter)
Fits 718 Cayman and Boxster with the four cylinder turbo engines.
